Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

13 Tooth vs 20 Tooth Shearing Comb: Which One Should You Buy?

13 tooth vs 20 tooth shearing comb, compared on the 20-tooth Oster comb and the 13-tooth JT sprocket: tooth count, material, weight, fit and which side suits a shearing head.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

13 Tooth vs 20 Tooth Shearing Comb: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Oster 20-Tooth Show CombOster 20-Tooth Show Comb9.7/10View on Amazon
  2. 2JT JTF249.13 Front SprocketJT JTF249.13 Front Sprocket9.2/10View on Amazon

Shearing day starts with a comb that fits the hand piece, and the 13 tooth vs 20 tooth shearing comb question has a clear answer: the 20-tooth side shears, and the 13-tooth side here does not. The Oster comb in this comparison is a real shearing comb for goats, while the JT listing on the 13-tooth side is a front sprocket, not a comb at all. We compared these listings on tooth count, material, weight, fit and warranty, using only what each listing publishes.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick verdict: choose the 20-tooth side if you shear goats with an Oster hand piece, as the Oster comb shows with its 20 teeth, fine-grain carbon steel and fit for all hand pieces and 3 inch Oster shearing heads. Choose the 13-tooth side only if you need a 13-tooth steel front sprocket, because the JT listing in this comparison is a sprocket, not a shearing comb. Tooth count alone does not make a comb, so read the listing title before you order.

Two examples

Oster 20-Tooth Show Comb

Oster 20-Tooth Show Comb

Oster9.7/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 20-tooth shearing comb in fine-grain carbon steel for close trimming of goats, made to fit all hand pieces and 3 inch Oster shearing heads.

Pros

  • 20 teeth for close trimming of goats
  • Fine-grain carbon steel, heat-treated and deep frozen
  • Fits all hand pieces and 3 inch Oster shearing heads
  • 1 year warranty stated in the listing

Cons

  • No tooth spacing figure is stated
  • Pack of 1 only
  • No cleaning guidance is stated in the listing
JT JTF249.13 Front Sprocket

JT JTF249.13 Front Sprocket

JT9.2/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 13-tooth steel front sprocket, not a shearing comb, listed at 0.18 pounds with dimensions of 4.1 by 3.6 by 5.0 inches.

Pros

  • Steel front sprocket with 13 teeth stated
  • Weight of 0.18 pounds stated in the spec table
  • Dimensions of 4.1 by 3.6 by 5.0 inches stated
  • Part number JTF249.13 stated in the listing

Cons

  • Not a shearing comb: the listing names a front sprocket
  • No shearing head fit is stated
  • Warranty field names a manufacturer warranty with no term stated
  • Bullets repeat the title and add no shearing detail

As an Amazon Associate I earn from qualifying purchases.


13 tooth vs 20 tooth shearing comb: side by side

Shearing comb GoatGear Score Teeth Material Weight Fit Warranty
Oster 20-Tooth Show Comb 9.7/10 20 Fine-grain carbon steel 0.2 pounds All hand pieces, 3 in Oster heads 1 year
JT JTF249.13 Front Sprocket 9.2/10 13 Steel 0.18 pounds Not a shearing comb Not stated

Sizes and capacities are the manufacturer’s numbers as each listing states them, pulled 6 November 2026.

Tooth count and what each side actually is

Tooth count is the headline here, but it describes different things. The Oster comb has 20 teeth and is built for close trimming of goats, while the JT listing has 13 teeth on a steel front sprocket. A tooth count alone does not turn a sprocket into a comb, and the listings give no tooth spacing figure for either side, so there is no spacing comparison to make.

The Oster bullets name close trimming of goats and fit for all hand pieces and 3 inch Oster shearing heads. The JT bullets repeat the listing title and name no shearing use at all. That gap is the whole comparison: one listing is a shearing comb, and the other is a front sprocket that happens to share a tooth count with the topic.

Material and build

Oster lists fine-grain carbon steel, heat-treated and deep frozen for long product life. JT lists steel for its front sprocket, with a stated weight of 0.18 pounds and dimensions of 4.1 by 3.6 by 5.0 inches. Both listings name steel, but they describe different tools, so the materials do not settle which side shears better. For clippers that take these combs, see our best goat clippers picks.

Weight and size

The Oster comb weighs 0.2 pounds, and the JT sprocket weighs 0.18 pounds. Weight does not decide this comparison, since a comb and a sprocket are different tools and the listings state no shared job for them. The Oster spec table gives dimensions to many decimal places, so its stated size reads as a conversion, while the JT spec table gives clean dimensions of 4.1 by 3.6 by 5.0 inches for the sprocket.

Fit for shearing heads

Fit is where the sides part ways. The Oster comb fits all hand pieces and 3 inch Oster shearing heads, as the listing states. The JT listing states no fit for shearing heads or hand pieces, because it is a front sprocket. A buyer who orders by tooth count alone could end up with a sprocket, so check the fit line and the listing title before ordering. Our curry comb for goats guide covers another grooming tool that fits the hand, not a shearing head.

Warranty and listing gaps to check

The Oster listing states a 1 year warranty, the only warranty term in this comparison. The JT warranty field reads Manufacturer Warranty with no term stated, so it earns no warranty points. The gaps go further: the Oster listing gives no tooth spacing figure and no cleaning guidance, and the JT listing gives no shearing fit at all, because it is not a shearing product. If tooth spacing or a warranty term decides your purchase, ask the seller before you order.

Which should you choose?

Choose the 20-tooth side if you shear goats with an Oster hand piece and want a comb for close trimming, as the Oster comb shows with 20 teeth, fine-grain carbon steel and fit for all hand pieces and 3 inch Oster shearing heads. Keepers who want more clipper options can also compare our electric sheep shears picks.

Choose the 13-tooth side if you need a 13-tooth steel front sprocket, because that is what the JT listing sells. Do not order it as a shearing comb: it states no fit for shearing heads, and a goat keeper who needs a comb should pick the Oster side instead.

Whichever side you pick, read the listing title first. A tooth count on its own says nothing about what the product does.

Around the Barn

  • Fit the Oster comb to an Oster hand piece and 3 inch shearing head before shearing day.
  • Use the Oster comb for close trimming of goats, as the listing states.
  • Check the listing title before ordering, since a 13-tooth listing can be a sprocket, not a comb.
  • Keep the JT sprocket with other sprockets, not with shearing heads, since it states no shearing fit.

FAQs from goat keepers

Is the 13-tooth side a shearing comb?

No. The JT listing on the 13-tooth side is a 13-tooth steel front sprocket, not a shearing comb, and it states no fit for shearing heads. The Oster comb is the shearing comb in this comparison.

What does the 20-tooth Oster comb fit?

All hand pieces and 3 inch Oster shearing heads, as the listing states. It is a 20-tooth comb in fine-grain carbon steel for close trimming of goats.

Does the Oster shearing comb state a warranty?

Yes. The listing states a 1 year warranty. The JT listing names a manufacturer warranty with no term stated.

How much does each listing weigh?

The Oster comb weighs 0.2 pounds and the JT sprocket weighs 0.18 pounds, as each spec table states. Weight does not decide this comparison, since a comb and a sprocket are different tools.

Behind the Farm Score

Product GoatGear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Oster 20-Tooth Show Comb 9.7 30 21 21 n/a 2
JT JTF249.13 Front Sprocket 9.2 14 18 12 n/a 0

Our scores stay inside 9.2 and 9.8, with point totals stretched across that gap evenly, so the item with more points shows the bigger score. No power and no stated safety feature means no safety row: the score is then out of 90 points.

The GoatGear Score weighs performance, build, value, safety and warranty. For shearing combs, safety would mean a stated guard or rounded tooth design, and neither listing states one, so both score zero on safety. Only the Oster listing states a warranty term, 1 year, so only it earns warranty points. The Oster leads because it is a real shearing comb with stated steel, fit and warranty, and the JT scores low because the listing is a front sprocket, not a comb. How we pick explains the weights.

More from the barn

See every goat clippers guide and all grooming and handling guides.

More picks: goat clippers, curry combs for goats, goat hoof trimmers and grooming kits for beginners.