
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCleartide Pool Cover Pump9.7/10View on Amazon - 2
Best High FlowSeesii 1HP Auto Pump9.7/10View on Amazon - 3
Best for Hot TubsAcquaer 1/3 HP Auto Pump9.7/10View on Amazon - 4
Best 12V BilgeSEAFLO 750 GPH Bilge Pump9.6/10View on Amazon - 5
Best Compact UtilityCleartide 1/4 HP Utility Pump9.6/10View on Amazon
A goat that knocks over the water trough at chore time leaves a mess that needs moving, and the best automatic submersible pump is the one that starts on its own when water rises and stops when the job is done. This comparison covers automatic submersible pumps by flow rate, lift, power, cord length and warranty, using only what each maker lists. Every figure below comes from the Amazon listings.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall Cleartide Pool Cover Pump: 2790 GPH, 30 ft lift, freeze protection and 3-year coverage Check price on Amazon
Best High Flow Seesii 1HP Auto Pump: 1 HP, 5548 GPH, auto and manual modes with dry-run protection Check price on Amazon
Best for Hot Tubs Acquaer 1/3 HP Auto Pump: 1/3 HP, 2160 GPH, auto on at 1-1/2 in, 3-year warranty Check price on Amazon
Best 12V Bilge SEAFLO 750 GPH Bilge Pump: 750 GPH, 12V, float switch and 4-year warranty Check price on Amazon
Best Compact Utility Cleartide 1/4 HP Utility Pump: 1/4 HP, 2160 GPH, 28 ft lift, auto water sensor Check price on Amazon
The gear we picked
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | Cleartide Pool Cover Pump | 9.7/10 | Buy on Amazon |
| 2 | Seesii 1HP Auto Pump | 9.7/10 | Buy on Amazon |
| 3 | Acquaer 1/3 HP Auto Pump | 9.7/10 | Buy on Amazon |
| 4 | SEAFLO 750 GPH Bilge Pump | 9.6/10 | Buy on Amazon |
| 5 | Cleartide 1/4 HP Utility Pump | 9.6/10 | Buy on Amazon |

Cleartide Pool Cover Pump
A 1/3 HP pool cover and utility pump with 2790 GPH, a 30 ft lift, auto and manual modes and freeze protection.
Pros
- 2790 GPH with a 30 ft lift
- Auto mode starts at 1-1/2 inches and stops at 2/5 inch
- Dry-run shut-off in 5 seconds, tip-over stop and freeze protection
- 25 ft cord, 25 ft rope, elbow fitting and two adapters included
Cons
- Built for pool covers first, so utility use needs the base swap
- 2790 GPH moves less water than the 5548 GPH Seesii pump
- Needs a 120V AC outlet
- Auto mode stops at 2/5 inch, leaving a shallow layer behind

Seesii 1HP Auto Pump
A 1 HP automatic submersible pump with 5548 GPH, auto and manual modes, dry-run protection and a 25 ft cord.
Pros
- 5548 GPH, the highest flow here
- Auto and manual modes with a float sensor
- Dry-run protection shuts the motor off if water runs out
- 25 ft cord, carry handle and 1.5 inch NPT outlet
Cons
- Manual mode is needed to pump down to the lowest water level
- Needs a 110V outlet within 25 ft
- The 13.8 inch height suits deeper water than a shallow puddle
- Just under 12 lbs, the heaviest pump here

Acquaer 1/3 HP Auto Pump
A 1/3 HP automatic submersible pump with 2160 GPH that turns on at 1-1/2 inches and drains down to 1/4 inch.
Pros
- Auto on at 1-1/2 inches and off below 1/4 inch
- Bottom suction removes water down to 1/4 inch
- Temperature control core guards against dry burning
- 3/4 inch garden hose adapter with check valve included
Cons
- The 10 ft cord limits where the pump can sit
- 2160 GPH is less than the 2790 and 5548 GPH picks
- Needs a 115V outlet
- The 12.4 inch length takes more room in a small sump

SEAFLO 750 GPH Bilge Pump
A 12V automatic bilge pump with 750 GPH, a float switch, an ignition-protected housing and a 4-year warranty.
Pros
- 4-year warranty, the longest here
- 12V DC power suits boat bilges
- Ignition-protected sealed housing
- Snap-off strainer base for cleaning
Cons
- 750 GPH, the lowest flow here
- The 3 ft lead limits where the pump can sit
- 12V DC needs a boat battery, not a wall outlet
- The 3/4 inch outlet suits smaller hoses only

Cleartide 1/4 HP Utility Pump
A 1/4 HP submersible utility pump with 2160 GPH, a 28 ft lift and auto and manual modes.
Pros
- 2160 GPH with a 28 ft lift
- Auto and manual modes with a water sensor
- Handles solids up to 1/8 inch
- Copper-wound motor in a thermoplastic housing
Cons
- No warranty term is stated
- 10 ft cord is short
- 1/4 HP is the smallest motor here
- Auto mode stops at 1/5 inch, leaving a shallow layer
As an Amazon Associate I earn from qualifying purchases.
Also worth comparing
Cleartide 1/3 HP Submersible Utility PumpCheck price on Amazon
LANCHEZ Sump PumpCheck price on Amazon
More picks to compare
Cleartide 1/3 HP Utility PumpSuits flooded basements and yards with 2790 GPH and dual modes.Check on Amazon
Green Expert 1/3 HP PumpSuits flat floors with last-inch drainage to 1/25 inch.Check on Amazon
Prostormer 1 HP Sump PumpSuits clean and dirty water with 3700 GPH and three outlets.Check on Amazon
LEO 1/3 HP Sump PumpSuits pools and basements with UL certification and 2250 GPH.Check on Amazon
MEDAS 1/3 HP Auto PumpSuits basements and pools with a smart sensor and 2450 GPH.Check on Amazon
Spec comparison
| Pump | GoatGear Score | Flow | Lift | Power | Cord | Warranty | Amazon |
|---|---|---|---|---|---|---|---|
| Cleartide Pool Cover Pump | 9.7/10 | 2790 GPH | 30 ft | 120V AC | 25 ft | 3-year coverage | View on Amazon |
| Seesii 1HP Auto Pump | 9.7/10 | 5548 GPH | Not stated | 110V | 25 ft | 3-year warranty | View on Amazon |
| Acquaer 1/3 HP Auto Pump | 9.7/10 | 2160 GPH | Not stated | 115V | 10 ft | 3-year warranty | View on Amazon |
| SEAFLO 750 GPH Bilge Pump | 9.6/10 | 750 GPH | Not stated | 12V DC | 3 ft | 4-year warranty | View on Amazon |
| Cleartide 1/4 HP Utility Pump | 9.6/10 | 2160 GPH | 28 ft | Not stated | 10 ft | Not stated | View on Amazon |
Every spec repeats the brand’s rating from its listing (collected on 18 November 2026).
How to choose the best automatic submersible pump
Match flow rate to the job
Flow rate decides how fast the water goes. The Seesii pump moves 5548 GPH, and the maker says it drains a 500-gallon hot tub in under 6 minutes. The Cleartide cover pump moves 2790 GPH, and the Acquaer and Cleartide utility pumps move 2160 GPH each. The SEAFLO bilge pump moves 750 GPH, which fits a boat bilge rather than a pool or basement. For smaller jobs, the best submersible pump small guide covers lower-flow pumps.
Read the lift height
Lift height is how high the pump pushes water. The Cleartide cover pump lifts water 30 ft, and the Cleartide utility pump lifts water 28 ft. The Seesii, Acquaer and SEAFLO pumps state no lift height, so their listings give no figure to compare against a deep well or a high discharge point. When the discharge point sits well above the pump, pick a pump with a stated lift that clears it.
Auto on, auto off
Every pump here starts and stops on its own. The Cleartide cover pump turns on at 1-1/2 inches of water and stops at 2/5 inch, the Acquaer pump turns on at 1-1/2 inches and turns off below 1/4 inch, and the Cleartide utility pump starts at 1-1/5 inches and stops at 1/5 inch. The Seesii pump uses a float sensor, and the SEAFLO pump uses a float switch that activates at 1.6 to 2.0 inches. The Cleartide pumps and the Seesii pump also offer a manual mode that runs at any water level, which helps when the last water must come out.
Cord, outlet and hose
Cord length decides where the pump can sit. The Cleartide cover pump and the Seesii pump come with 25 ft cords, the Acquaer and Cleartide utility pumps come with 10 ft cords, and the SEAFLO pump has a 3 ft lead. Power differs too: the Cleartide cover pump runs on 120V AC, the Acquaer pump on 115V, the Seesii pump on 110V, and the SEAFLO pump on 12V DC. Outlets differ as well: the Seesii pump has a 1.5 inch NPT outlet, the Acquaer pump has a 1 inch NPT discharge with a 3/4 inch garden hose adapter, the SEAFLO pump has a 3/4 inch outlet, and the Cleartide utility pump comes with a 1-1/4 inch NPT elbow and dual adapters. Match the outlet to the hose on hand, and see the best heavy duty 100 ft garden hose guide for long hose runs. If a transfer pump fits the job better, the transfer pump vs submersible pump guide compares the two types.
Around the Barn
- Drop the pump in and let the sensor start it: the Seesii float sensor and the Cleartide and Acquaer water sensors switch on without a separate float.
- Use the manual mode when the last water must come out; the Cleartide pumps and the Seesii pump run in manual mode at any water level.
- Rinse the strainer base after pumping dirty water; the SEAFLO strainer snaps off, and the Acquaer strainer base cleans without tools or screws.
- The Cleartide cover pump keeps monitoring through winter and resumes pumping when ice thaws.
- Check the cord reach before placing the pump; the Cleartide cover pump and the Seesii pump both come with 25 ft cords.
FAQs from goat keepers
Which submersible pump is best for home use?
For pools, hot tubs and flooded basements, the Cleartide cover pump and the Seesii pump cover the most jobs, with auto modes, 2790 and 5548 GPH and 25 ft cords. For a boat bilge, the 12V SEAFLO pump fits the job.
What size submersible pump do I need for a hot tub?
The Seesii pump drains a 500-gallon hot tub in under 6 minutes at 5548 GPH, and the Acquaer and Cleartide pumps list hot tubs among their uses. Match the flow rate to the tub and the cord length to the nearest outlet.
What size submersible pump do I need for a 100 foot well?
None of these pumps states a 100 ft lift. The highest lifts stated here are 30 ft for the Cleartide cover pump and 28 ft for the Cleartide utility pump, so check the lift rating against the well depth before choosing.
Do these pumps turn on and off by themselves?
Yes. Each pump here has an automatic mode: the Cleartide pumps and the Acquaer pump use water sensors, the Seesii pump uses a float sensor, and the SEAFLO pump uses a float switch. The Cleartide pumps and the Seesii pump also offer a manual mode.
Behind the Farm Score
The GoatGear Score weighs performance (flow rate and lift), build, value, safety and warranty. For submersible pumps, safety means dry-run, overheat and overload protection, tip-over shut-off and stated certifications. Four of the five pumps state a warranty term, and the longest is the 4-year warranty on the SEAFLO bilge pump. How we pick explains the weights.
| Product | GoatGear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Cleartide Pool Cover Pump | 9.7 | 30 | 22 | 21 | 9 | 3 |
| Seesii 1HP Auto Pump | 9.7 | 33 | 21 | 21 | 7 | 3 |
| Acquaer 1/3 HP Auto Pump | 9.7 | 29 | 21 | 21 | 7 | 3 |
| SEAFLO 750 GPH Bilge Pump | 9.6 | 26 | 20 | 20 | 8 | 4 |
| Cleartide 1/4 HP Utility Pump | 9.6 | 29 | 21 | 20 | 8 | 0 |
We translate each weighted point total onto the 9.2 through 9.8 band; ranks never flip, because the conversion is linear.
More from the barn
See every farm water guide and all tractor and farm implements guides. Also see best submersible pump small, transfer pump vs submersible pump, best water trough for cattle and goat water troughs.
More picks: browse electric water transfer pumps, liquid transfer pumps and water storage tanks with float switches.
