Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Cheese Mold for Camembert (2026): 5 Compared

Five cheese molds compared for camembert by size, follower, capacity and material, from a camembert-specific 2-pack to multi-size sets.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

Best Cheese Mold for Camembert (2026): 5 Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1OFXDD 2pcs 20 ozBest OverallOFXDD 2pcs 20 oz9.6/10View on Amazon
  2. 2PetriStor 3pcs 1.25QTBest 3-PackPetriStor 3pcs 1.25QT9.5/10View on Amazon
  3. 3PetriStor 10pcs with FollowerBest with FollowerPetriStor 10pcs with Follower9.5/10View on Amazon

Camembert needs a soft cheese mold that drains whey gently and releases the wheel cleanly, and the best cheese mold for camembert is the one that names it: the OFXDD 2-pack of 20 oz molds is explicitly for feta, camembert and ricotta with a non-stick finish. Goat milk camembert is a classic farmstead cheese, and the mold is the cheapest part of the make: the milk, the culture and the aging space cost far more than the plastic that shapes the wheel. The right mold pays for itself in wheels that release cleanly and age evenly. Buy the mold for the cheese you actually make. Not the cheese you dream about. We compared five by size, follower, capacity and material, using only what each listing publishes. Every number in this article comes straight from the listings, so you can compare the picks on equal terms.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick picks

The gear we picked

OFXDD 2pcs 20 oz

OFXDD 2pcs 20 oz

OFXDD9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of 20 oz plastic ricotta baskets explicitly for feta, camembert and ricotta, non-stick and dishwasher safe.

Pros

  • Explicitly for camembert
  • Non-stick for easy demolding
  • Dishwasher safe stated
  • Reusable design stated

Cons

  • No warranty is stated
  • Only 2 pieces
  • No follower is stated
  • No dimensions in the listing
PetriStor 3pcs 1.25QT

PetriStor 3pcs 1.25QT

PetriStor9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-pack of 1.25QT soft cheese molds at 5.8 by 5.3 by 3.4 inches, polypropylene, for ricotta, feta, brie and camembert.

Pros

  • 3 molds for batch making
  • 1.25QT capacity each
  • Polypropylene material stated
  • Suits ricotta, feta, brie

Cons

  • No warranty is stated
  • No follower is stated
  • 0.1 lb each is very light
  • No certification is stated
PetriStor 10pcs with Follower

PetriStor 10pcs with Follower

PetriStor9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 10-pack of 1/3QT cheese molds with follower, 3.6 by 3.2 by 3 inches, thick-walled for soft through hard cheeses.

Pros

  • Follower included for pressing
  • 10 molds in the pack
  • Thick wall for strength
  • Suits soft through hard cheeses

Cons

  • No warranty is stated
  • Small 1/3QT size only
  • No certification is stated
  • Wooden press not included
QG group 4-Piece Set

QG group 4-Piece Set

QG group9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-piece assorted cheese mold set from 11.8 to 40.6 fl oz, yielding 0.55 to 2.64 lb of cheese, for soft and semi-hard cheeses.

Pros

  • 4 sizes in one set
  • 0.55 to 2.64 lb yield stated
  • Suits ricotta, feta, goat cheese
  • Semi-hard cheeses covered

Cons

  • No warranty is stated
  • No follower is stated
  • No dimensions are given
  • No certification is stated
Home Brew Ohio Hard Mold

Home Brew Ohio Hard Mold

Home Brew Ohio9.4/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 4-1/2 by 5 inch hard cheese mold with follower and open bottom, 2 lb capacity from 2 gallons of milk, 100 lb press weight.

Pros

  • Follower and open bottom
  • Handles 100 lb press weight
  • Food grade polypropylene from France
  • 2 lb cheese from 2 gal milk

Cons

  • No warranty is stated
  • Hard cheese focus, not camembert
  • Only 1 mold
  • No certification is stated

As an Amazon Associate I earn from qualifying purchases.


Also worth comparing

More picks to compare

  • PetriStor 6pcs 1.25QTPetriStor 6pcs 1.25QT6-pack of the 1.25QT soft cheese mold for bigger batchesCheck on Amazon
  • OFXDD 2pcs Soft CheeseOFXDD 2pcs Soft Cheese2-pack soft cheese molds for feta, camembert and ricottaCheck on Amazon

Spec comparison

Mold Goat Score Pieces Capacity Follower Warranty Amazon
OFXDD 2pcs 20 oz 9.6/10 2 20 oz Not stated Not stated View on Amazon
PetriStor 3pcs 1.25QT 9.5/10 3 1.25QT Not stated Not stated View on Amazon
PetriStor 10pcs with Follower 9.5/10 10 1/3QT Yes Not stated View on Amazon
QG group 4-Piece Set 9.5/10 4 11.8-40.6 fl oz Not stated Not stated View on Amazon
Home Brew Ohio Hard Mold 9.4/10 1 2 lb cheese Yes Not stated View on Amazon

Sizes and capacities are the manufacturer’s numbers as each listing states them, pulled 19 October 2026. No listing here states a warranty term. These are simple plastic tools, so the warranty question matters less than the material and the fit.

How to choose the best cheese mold for camembert

Size for a camembert wheel

Camembert is a small wheel, so the 20 oz OFXDD molds and the 1.25QT PetriStor molds are the right scale. The 1.25QT molds at 5.8 by 5.3 by 3.4 inches give the curd room to settle; the tapered shape helps the finished wheel slide out without tearing the rind. A torn rind is a spoiled wheel, so the release matters as much as the shape. The 1/3QT PetriStor molds suit mini wheels; the 40.6 fl oz QG mold suits larger soft cheeses. See all cheese making kits for more options, including presses and cultures to complete the setup.

Follower or not

Camembert needs light pressing, not the 100-pound press the Home Brew Ohio mold handles. The PetriStor 10-pack’s follower gives gentle even pressing; the OFXDD and PetriStor 3-pack have no follower, which suits free-draining soft cheese. If the recipe says press lightly, the follower earns its place; if it says drain only, skip it. Choose a follower when the recipe calls for pressing.

Mold Pieces Capacity Follower
OFXDD 2pcs 2 20 oz Not stated
PetriStor 3pcs 3 1.25QT Not stated
PetriStor 10pcs 10 1/3QT Yes

Drainage and rind

Camembert’s bloomy rind needs even whey drainage. The OFXDD listing describes uniform curd pressing and optimal moisture release, which is exactly the mechanism. Molds with open bottoms, like the Home Brew Ohio’s, drain fastest; follower molds press the whey out evenly. For camembert, the goal is a wheel that holds its shape with a smooth rind: too much pressing and the wheel is dense, too little and it slumps. For camembert, free draining beats hard pressing. The wheel should knit together under its own weight, with the mold shaping it, not the press.

Material and release

All five are plastic or polypropylene. The OFXDD’s non-stick finish and the PetriStor’s polypropylene both promise clean release. The Home Brew Ohio listing names its polypropylene as imported from France, the traditional source for cheese molds. For camembert, any smooth plastic works; the release quality matters more than the resin brand. Dishwasher-safe care on the OFXDD simplifies cleanup between batches. The others state no care terms, so hand-wash them and air-dry to keep them odor-free.

Batch size math

A single make of camembert fills several molds at once. The PetriStor 10-pack at 1/3QT each covers a mini-wheel batch; the 3-pack of 1.25QT molds covers three full wheels. The QG set’s 2.64 lb top mold is the large-format option. For a farmstead maker selling at market, the larger molds make the impressive wheels; for home use, the 1.10 and 1.54 lb molds are the everyday sizes. Count the molds before the milk, not after.

How many molds

One batch of camembert makes several wheels, so count matters: the PetriStor 10-pack covers a full batch, the 3-packs cover a small one, and the 2-pack suits a first try. Running out of molds mid-make is the classic beginner mistake; the curd waits for no one, so count the molds before the milk, not after. The QG 4-piece set covers four different sizes at once. Start with the 22.0 fl oz mold for a first camembert and work up to the 40.6 fl oz for larger soft cheeses as the recipe book grows.

Around the Barn

  • Sanitize molds before each batch; washable plastic and dishwasher-safe care simplify this. A mold that smells of the last batch will flavor the next one.
  • Let camembert drain freely in the mold before any pressing. Flip the wheels in the molds during draining for an even rind, per standard practice.
  • Use the follower only when the recipe calls for pressing. For camembert the follower’s job is gentle shaping, not hard compression.
  • Air-dry molds after washing to keep them odor-free. Stack nested molds loosely so air circulates; trapped moisture is what makes plastic smell.

FAQs from goat keepers

Which mold is made for camembert?

The OFXDD 2-pack explicitly lists camembert among its uses.

Do I need a follower for camembert?

Camembert needs light pressing. A follower like the PetriStor 10-pack’s helps; free-draining molds work without one. Never use the Home Brew Ohio’s 100-pound press capacity on camembert: that rating is for hard cheeses, and camembert would collapse under it.

What size mold for one camembert wheel?

The 20 oz OFXDD molds and 1.25QT PetriStor molds match a small wheel. The 1/3QT molds suit minis.

Are these molds dishwasher safe?

The OFXDD listing states dishwasher safe. The others state no care terms, so hand-wash them with hot soapy water and air-dry before stacking. The PetriStor listings describe odor-free polypropylene, which matters when the same molds make batch after batch.

Can I press hard cheese in these?

The Home Brew Ohio mold handles up to 100 pounds of press weight. That capacity is overkill for camembert but essential for a 2-pound cheddar from 2 gallons of milk, per the listing. The soft cheese molds are not for hard pressing.

OFXDD 2pcs 20 oz
Still deciding? Our top pickOFXDD 2pcs 20 oz
Check price on Amazon

Behind the Farm Score

The Goat Score weighs camembert fit (stated use, drainage, release), build (material and wall strength), value (molds per listing), safety and warranty. No listing here states a warranty term, so the warranty score is zero across the board and the ranking comes from fit, build, value and safety. The OFXDD leads because the listing names camembert directly and states non-stick and dishwasher-safe care. The PetriStor 3-pack follows on value: three 1.25QT polypropylene molds for batch makes. How we pick explains the weights.

Product GoatGear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
OFXDD 2pcs 20 oz 9.6 32 21 20 4 0
PetriStor 3pcs 1.25QT 9.5 30 21 21 0 0
PetriStor 10pcs with Follower 9.5 30 21 20 0 0
QG group 4-Piece Set 9.5 29 20 21 0 0
Home Brew Ohio Hard Mold 9.4 28 21 19 0 0

Our scores stay inside 9.2 and 9.8, with point totals stretched across that gap evenly, so the item with more points shows the bigger score.

More from the barn

See every cheese making kits guide and all goat milking guides for the full dairy setup.