Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Livestock Loading Ramp for Pigs (2026): 3 Compared

Three loading ramps for pigs compared by capacity, surface, size and fit, from a steel shed ramp to folding and rubber ramps.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

Best Livestock Loading Ramp for Pigs (2026): 3 Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Toplamper Shed Loading RampBest OverallToplamper Shed Loading Ramp9.6/10View on Amazon
  2. 2DNA Motoring Folding RampsBest FoldingDNA Motoring Folding Ramps9.5/10View on Amazon
  3. 3VEVOR Rubber Curb Ramp 2-PackBest ThresholdVEVOR Rubber Curb Ramp 2-Pack9.5/10View on Amazon

The best livestock loading ramp for pigs is a wide, grippy ramp with an honest load rating. We compared three loading ramps by capacity, surface, size and fit, using only what each listing publishes. The Toplamper lists 1500 pounds, the DNA pair 880 pounds, and the VEVOR pair 33069 pounds; they differ in width, surface and rated capacity.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick picks

The gear we picked

Toplamper Shed Loading Ramp

Toplamper Shed Loading Ramp

Toplamper9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 29 by 24 inch shed loading ramp with an anti-slip punch plate surface, rated 1500 pounds.

Pros

  • Punch plate traction, per the listing
  • 1500-pound rating, per the listing
  • 24 inches wide, per the listing
  • Shed and garage use, per the listing

Cons

  • 29 inches is short for trailers
  • Single ramp, not a pair
  • No warranty term is stated
  • 10.68 kg for one ramp
DNA Motoring Folding Ramps

DNA Motoring Folding Ramps

DNA MOTORING9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A pair of folding HDPE ramps, 70 by 9 inches unfolded, rated 880 pounds per pair, with non-slip ridges and stabilizing plates.

Pros

  • 70 inches long unfolded, per the listing
  • 880 pounds per pair, per the listing
  • Non-slip ridges and stabilizing plates, per the listing
  • Folds to 37 inches with a carry handle, per the listing

Cons

  • 9 inches wide only
  • 440 pounds per ramp, not 880
  • No warranty term is stated
  • HDPE plastic, not steel
VEVOR Rubber Curb Ramp 2-Pack

VEVOR Rubber Curb Ramp 2-Pack

VEVOR9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of rubber curb ramps, 38.5 by 5.9 inches per piece, rated 33069 pounds, with drainage channels and an anti-slip surface.

Pros

  • 33069-pound rating, per the listing
  • Drainage channels, per the listing
  • Rubber all-weather build, per the listing
  • Pre-drilled holes with expansion screws, per the listing

Cons

  • 5.9 inches wide per piece
  • 2 inches of rise only
  • No warranty term is stated
  • 22.1 pounds for the 2-pack

As an Amazon Associate I earn from qualifying purchases.


More picks to compare

  • Aluminum Shed Ramps 2-PackAluminum Shed Ramps 2-Pack48-inch wide pair, 1500 poundsCheck on Amazon
  • Dual Layer Shed RampsDual Layer Shed RampsDual-layer anti-slip strips, 1500 poundsCheck on Amazon

Spec comparison

Loading Ramp GoatGear Score Capacity Size Surface Warranty Amazon
Toplamper Shed Loading Ramp 9.6/10 1500 lb 29 x 24 in Punch plate Not stated View on Amazon
DNA Motoring Folding Ramps 9.5/10 880 lb/pair 70 x 9 in Non-slip ridges Not stated View on Amazon
VEVOR Rubber Curb Ramp 2-Pack 9.5/10 33069 lb 38.5 x 5.9 in Drainage channels Not stated View on Amazon

Sizes and capacities are the manufacturer’s numbers as each listing states them, pulled 21 October 2026.

How to choose the best livestock loading ramp for pigs

Length and slope

The Toplamper shed ramp is 29 by 24 inches and fits rises up to 6.5 inches, the DNA folding pair runs 70 inches long and 9 inches wide and folds to 37 inches for carrying, and the VEVOR rubber pair runs 38.5 by 5.9 inches per piece with a 77-inch connected length and a 2-inch rise. Longer is kinder on legs; measure the rise before buying, since the VEVOR stands only 2 inches high. See loading ramps for trailers for trailer-specific picks.

Surface grip

The Toplamper lists a punch plate traction surface, the DNA pair lists non-slip ridges with stabilizing plates, and the VEVOR lists drainage channels with an anti-slip surface. Texture matters on wet mornings, and all three designs address water or grip: punch plate on the Toplamper, ridges and plates on the DNA pair, drainage channels on the VEVOR. Our gate latches for livestock gates guide covers the next yard job.

Capacity honesty

The three ramps list very different ratings: the Toplamper 1500 pounds as a single ramp, the DNA pair 880 pounds per pair (440 pounds per ramp), and the VEVOR pair 33069 pounds. Read the rating carefully: a pair rating is not a per-ramp rating, and a single ramp carries its own rating alone. Compare the rating type, not just the number, and match width to the animals: the Toplamper is 24 inches wide, the DNA pair 9 inches, and the VEVOR 5.9 inches per piece.

Around the Barn

  • Check the ramp surface for slick spots before loading.
  • Fold the DNA pair to 37 inches with its carry handle for carrying and storage.
  • Fix the VEVOR pair with its pre-drilled holes and expansion screws.
  • Measure the rise before buying: the VEVOR stands only 2 inches high, and the Toplamper fits rises up to 6.5 inches.

FAQs from goat keepers

What is the best loading ramp for pigs?

The Toplamper shed ramp scores highest here: 24 inches wide, 1500 pounds, with a punch plate traction surface.

How long and wide are these ramps?

The Toplamper is 29 by 24 inches, the DNA pair is 70 by 9 inches and folds to 37 inches, and the VEVOR pair is 38.5 by 5.9 inches per piece with a 77-inch connected length. Measure the threshold before buying.

How much weight should the ramp hold?

The Toplamper lists 1500 pounds as a single ramp, the DNA pair lists 880 pounds per pair, and the VEVOR pair lists 33069 pounds. Compare the rating type, not just the number.

Do these ramps need assembly?

The DNA pair folds down with a carry handle for carrying and storage, and the VEVOR uses pre-drilled holes with expansion screws for a stable install. The Toplamper lists a punch plate traction surface for loading into sheds and garages.

Toplamper Shed Loading Ramp
Still deciding? Our top pickToplamper Shed Loading Ramp
Check price on Amazon

Behind the Farm Score

The GoatGear Score weighs performance (pig loading fit), build, value, safety and warranty. For loading ramps, safety means anti-slip surfaces, adequate width and honest load ratings. None of the three states a warranty term. How we pick explains the weights.

Product GoatGear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Toplamper Shed Loading Ramp 9.6 29 20 20 8 0
DNA Motoring Folding Ramps 9.5 28 20 19 8 0
VEVOR Rubber Curb Ramp 2-Pack 9.5 27 20 19 8 0

Our scores stay inside 9.2 and 9.8, with point totals stretched across that gap evenly, so the item with more points shows the bigger score.

More from the barn

See every fencing and shelter guide and all fencing guides.

More picks: loading ramps for trailers, gate latches for livestock gates and digital vs mechanical livestock scale.