
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVEVOR 2-Pack 3/8 in x 20 ft9.7/10View on Amazon - 2
Best ConnectorAMBULL 1/2 in G80 Connector9.5/10View on Amazon - 3
Best Long Single ChainSALIFTFE 3/8 in x 20 ft G809.5/10View on Amazon - 4
Best Short ChainVEVOR 3/8 in x 10.3 ft G809.5/10View on Amazon - 5
Best for LoggingWanlipro 7 ft Logging Chain9.4/10View on Amazon
When a fallen limb blocks the fence line and the tractor has to drag it clear, the best tow chain for tractor work is the link that turns engine power into a steady pull. A chain that is too short leaves the tractor close to the load, while a chain with too little working load puts the pull at risk. This guide compares tow chains by length, working load, break strength, grade, hooks and warranty, using only what each listing publishes.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall VEVOR 2-Pack 3/8 in x 20 ft: Two 20 ft G80 chains, 7100 lbs working load, galvanized and DOT stated Check price on Amazon
Best Connector AMBULL 1/2 in G80 Connector: 12000 lbs load rating, 47000 lbs break capacity, 12 months support Check price on Amazon
Best Long Single Chain SALIFTFE 3/8 in x 20 ft G80: 20 ft G80 chain, 7100 lbs working load, forged G70 grab hooks Check price on Amazon
Best Short Chain VEVOR 3/8 in x 10.3 ft G80: 10.3 ft G80 chain, 7100 lbs working load, 4:1 security factor Check price on Amazon
Best for Logging Wanlipro 7 ft Logging Chain: 7 ft choker chain, 2 ton pull, 13.5 in probe stake included Check price on Amazon
The gear we picked
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | VEVOR 2-Pack 3/8 in x 20 ft | 9.7/10 | Buy on Amazon |
| 2 | AMBULL 1/2 in G80 Connector | 9.5/10 | Buy on Amazon |
| 3 | SALIFTFE 3/8 in x 20 ft G80 | 9.5/10 | Buy on Amazon |
| 4 | VEVOR 3/8 in x 10.3 ft G80 | 9.5/10 | Buy on Amazon |
| 5 | Wanlipro 7 ft Logging Chain | 9.4/10 | Buy on Amazon |

VEVOR 2-Pack 3/8 in x 20 ft
Two 20 ft G80 chains with grab hooks, rated at a 7100 lbs working load and a breaking load over 28,400 lbs.
Pros
- Two 20 ft chains in the box, so a spare is on hand
- 7100 lbs working load with a breaking load over 28,400 lbs
- G80 manganese steel with a breaking strength of 800MPa
- Galvanized coating and DOT requirements stated
Cons
- Two chains to store and untangle between jobs
- 20 ft is long for a short pull near the barn
- Grab hooks only, no other hook style in the box
- Swivel hook only, no fixed hook option

AMBULL 1/2 in G80 Connector
A 2-pack of 1/2 in G80 connector links rated at 12000 lbs load-bearing, with rubber isolators and 12 months support.
Pros
- 12000 lbs load-bearing capacity, the highest load rating here
- 47000 lbs breaking capacity stated
- 12 months support from AMBULL stated
- Rubber isolators included to cut wear and noise
Cons
- A connector link, not a full chain, so a chain is still needed
- The 1/2 in size fits 1/2 in chain only
- Rubber isolators are small parts that can wear or go missing
- The box holds links, pins and isolators to keep track of

SALIFTFE 3/8 in x 20 ft G80
A 20 ft G80 tow chain with two G70 grab hooks, rated at a 7100 lbs working load and a 28,400 lbs break strength.
Pros
- 7100 lbs working load with a 28,400 lbs break strength
- 20 ft reach for long pulls across open ground
- G80 chain with forged steel grab hooks
- Manganese steel with heat treatment stated
Cons
- No warranty term is stated
- Single chain only, no second chain in the box
- Hooks are G70 grade while the chain is G80
- At 15.0 pounds it is heavier than the AMBULL connector

VEVOR 3/8 in x 10.3 ft G80
A 10.3 ft G80 binder chain with clevis grab hooks, rated at a 7100 lbs working load with a 4:1 security factor.
Pros
- 7100 lbs working load with a 4:1 security factor
- G80 chain at 3/8 in diameter
- Galvanized for corrosion protection
- DOT requirements stated, parts clearly marked
Cons
- Shorter reach than the 20 ft chains here
- Single chain only, no second chain in the box
- At 16.09 pounds it is heavier than the SALIFTFE chain
- One length only in this listing

Wanlipro 7 ft Logging Chain
A 7 ft logging chain with a choker hook and a 13.5 in steel probe stake, rated at a 2 ton pulling capacity.
Pros
- 2 ton pulling capacity for skidding and dragging
- 13.5 in steel probe stake included
- Grab hook for fast, firm attachment
- Two length options, 7 ft and 10 ft
Cons
- No warranty term is stated
- The 7 ft chain has the least reach here
- The probe stake adds a loose part to keep track of
- Suits logging and skidding, less suited to trailer tie-down
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
Wanlipro 10 ft Logging Chain10 ft choker chain with the same 2 ton pull and 13.5 in probe stake.Check on Amazon
VEVOR 3/8 in x 20 ft Binder ChainSingle 20 ft G80 chain, 7100 lbs working load, DOT certification stated.Check on Amazon
Tnyeobae 35 in Trailer Safety ChainTwo 35 in G70 chains, 18800 lbs break strength, 5/16 in snap hooks.Check on Amazon
Spec comparison
| Tow Chain | GoatGear Score | Length | Working Load | Grade | Warranty | Amazon |
|---|---|---|---|---|---|---|
| VEVOR 2-Pack 3/8 in x 20 ft | 9.7/10 | 20 ft | 7100 lbs | G80 | Not stated | View on Amazon |
| AMBULL 1/2 in G80 Connector | 9.5/10 | 1/2 in link | 12000 lbs | G80 | 12 months | View on Amazon |
| SALIFTFE 3/8 in x 20 ft G80 | 9.5/10 | 20 ft | 7100 lbs | G80 | Not stated | View on Amazon |
| VEVOR 3/8 in x 10.3 ft G80 | 9.5/10 | 10.3 ft | 7100 lbs | G80 | Not stated | View on Amazon |
| Wanlipro 7 ft Logging Chain | 9.4/10 | 7 ft | 2 ton pull | Forged steel | Not stated | View on Amazon |
These are maker ratings taken from the goat gear listings on 22 November 2026, not our own measurements.
How to choose the best tow chain for tractor
Length and reach
Length sets how far the tractor can sit from the load. The SALIFTFE chain and the VEVOR 2-pack both measure 20 ft, the VEVOR single chain measures 10.3 ft, and the Wanlipro logging chain measures 7 ft. A longer chain suits a drag across open ground, while a shorter chain suits a close pull near the barn. The AMBULL links are connectors, so they join chains rather than adding length on their own.
Working load and break strength
Working load is the figure to plan around, and break strength shows the margin above it. Three chains here state a 7100 lbs working load, and the SALIFTFE chain and the VEVOR 2-pack both state a break strength of 28,400 lbs or more. The AMBULL connector states a 12000 lbs load-bearing capacity and a 47000 lbs breaking capacity. The VEVOR 10.3 ft chain adds a 4:1 security factor, which the maker describes as cover for loads up to four times the working load.
| Chain | Length | Working load |
|---|---|---|
| VEVOR 2-Pack | 20 ft | 7100 lbs |
| SALIFTFE | 20 ft | 7100 lbs |
| VEVOR 10.3 ft | 10.3 ft | 7100 lbs |
Hooks and connectors
Hooks decide how fast the chain goes on and how it holds. The SALIFTFE chain comes with two G70 grab hooks, the VEVOR chains use clevis grab hooks, and the Wanlipro logging chain uses a grab hook with a choker design for logs. The AMBULL hammerlock links join chain ends and can also serve as a shackle, with rubber isolators that cut wear and noise. For a bucket hook that stays on the tractor, see the best bolt on tractor bucket grab hooks guide.
Grade, coating and warranty
Grade and coating decide how the chain holds up to weather and hard use. The SALIFTFE and VEVOR chains are G80 grade, the VEVOR chains add a galvanized coating, and the SALIFTFE chain has a yellow zinc finish. The Wanlipro chain is forged steel with a grab hook, and its listing names tractor towing, tree skidding and log dragging. Only the AMBULL connector states a warranty term, with 12 months support for quality problems. Pins and connectors wear with the chain, so see the best tractor implement hitch pins guide when the hardware needs a refresh.
Around the Barn
- Check the grab hooks before each pull and stay within the stated working load.
- Coil the chain after use so the hooks cannot catch on a fence or a goat.
- Wipe mud off after dragging logs and keep galvanized chains dry between jobs.
- Keep the AMBULL rubber isolators on the links so wear and noise stay low.
- Store the Wanlipro probe stake with the chain so the set stays together.
FAQs from goat keepers
What working load should a tow chain for a tractor have?
Three chains here state a 7100 lbs working load, and the AMBULL connector states a 12000 lbs load-bearing capacity. Match the working load to the pull and stay within the stated limit.
What is the difference between working load and break strength?
The working load is the load the maker rates for regular use, while the break strength is the load at which the chain gives way. The SALIFTFE chain states a 7100 lbs working load and a 28,400 lbs break strength, and the VEVOR 2-pack states a breaking load over 28,400 lbs.
How long should a tow chain for a tractor be?
Lengths here run from 7 ft on the Wanlipro logging chain to 20 ft on the SALIFTFE chain and the VEVOR 2-pack. A longer chain keeps the tractor farther from the load, while the 10.3 ft VEVOR chain suits a shorter pull.
Are grab hooks or connector links better for a tow chain?
Grab hooks attach fast to a load or anchor point, and the AMBULL hammerlock links join two chains into a longer pull. Pick the fitting that matches the job, and check that the hook or link grade matches the chain.
Which tow chain here states a warranty?
Only the AMBULL connector states a warranty term, with 12 months support for quality problems. The other four listings state no warranty term.
Behind the Farm Score
The GoatGear Score weighs performance, build, value, safety and warranty. For tow chains, safety means a stated DOT requirement, a stated break strength, a firm hook design and a coating that resists rust. Only the AMBULL connector states a warranty term, with 12 months support. How we pick explains the weights.
| Product | GoatGear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VEVOR 2-Pack 3/8 in x 20 ft | 9.7 | 32 | 22 | 21 | 8 | 0 |
| AMBULL 1/2 in G80 Connector | 9.5 | 27 | 20 | 19 | 6 | 3 |
| SALIFTFE 3/8 in x 20 ft G80 | 9.5 | 30 | 21 | 21 | 7 | 0 |
| VEVOR 3/8 in x 10.3 ft G80 | 9.5 | 29 | 21 | 19 | 7 | 0 |
| Wanlipro 7 ft Logging Chain | 9.4 | 26 | 19 | 19 | 5 | 0 |
A score of 9.2 marks the weakest point total on our scale and 9.8 the strongest; totals in between are placed proportionally.
More from the barn
See every tractor attachment guide and all tractor implement guides. Also see our best drag harrow 6 ft. Also see our best heavy duty pasture drag harrow. Also see our best tractor implement hitch pins. Also see our best bolt cutter set for goat fences. Also see our best tractor tire chains for front or rear. Also see our best bolt on tractor bucket grab hooks.
More picks: browse tractor implements, barn and farm tools and pasture tools.
