
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallDICMIC 496 Filter Assembly9.6/10View on Amazon - 2
Best 10 Micron KitHengShine 1200KTF7018 Kit9.5/10View on Amazon - 3
Best Complete KitDICMIC 1200KTF7018 Kit9.5/10View on Amazon - 4
Best 1 Inch KitATRACYPART 1 In NPT Kit9.4/10View on Amazon - 5
Best 10 Micron FilterATRACYPART 10 Micron Filter9.4/10View on Amazon
A frozen bucket at morning milking and a transfer tank that sputters halfway through the fill make a slow start to the day, so the best transfer pump filter is the one that keeps dirt and water out of the fuel before it reaches the pump. We compared five spin-on filter kits by micron rating, flow rate, pressure and thread size, using only what each listing publishes. Three of the five are complete kits with a filter head, and the other two are a filter assembly and a lone spin-on filter.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall DICMIC 496 Filter Assembly: 30 micron, 150 PSI, water-separating bowl and drain valve, wrench and tape included Check price on Amazon
Best 10 Micron Kit HengShine 1200KTF7018 Kit: 10 micron kit with head, nipples, elbow and tape Check price on Amazon
Best Complete Kit DICMIC 1200KTF7018 Kit: 25 GPM spin-on kit with head, elbow and nipple for diesel, gasoline and kerosene Check price on Amazon
Best 1 Inch Kit ATRACYPART 1 In NPT Kit: 30 micron, 25 GPM, cast-aluminum head, 1 inch NPT threads Check price on Amazon
Best 10 Micron Filter ATRACYPART 10 Micron Filter: 10 micron spin-on that absorbs water from gasoline and diesel Check price on Amazon
The gear we picked
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | DICMIC 496 Filter Assembly | 9.6/10 | Buy on Amazon |
| 2 | HengShine 1200KTF7018 Kit | 9.5/10 | Buy on Amazon |
| 3 | DICMIC 1200KTF7018 Kit | 9.5/10 | Buy on Amazon |
| 4 | ATRACYPART 1 In NPT Kit | 9.4/10 | Buy on Amazon |
| 5 | ATRACYPART 10 Micron Filter | 9.4/10 | Buy on Amazon |

DICMIC 496 Filter Assembly
A 30 micron water-separating filter assembly with a bowl, drain valve, wrench and tape, rated to 25 GPM and 150 PSI.
Pros
- 30 micron element with water separation, a bowl and a drain valve
- Working pressure up to 150 PSI, the highest here
- Maximum flow rate of 25 GPM, with gravity flow of approximately 5 GPM
- Matching wrench and tape included for installation
Cons
- No warranty term is stated
- 1 inch NPT only, with no 3/4 inch option stated
- Assembly only, with no spare element included
- 30 micron only, with no finer element stated

HengShine 1200KTF7018 Kit
A complete 10 micron filter kit with head, nipples, elbow and tape, rated to 25 GPM.
Pros
- 10 micron filtration with a complete kit: filter, head, nipples, elbow and tape
- Rated to 25 GPM at a maximum pressure of 50 PSI
- Reinforced metal housing with threaded fittings
- Compatible with FR112, FR1210G, FR610G and related transfer pumps
Cons
- 3/4 inch NPT only, with no 1 inch option stated
- No water separation or drain valve stated
- No fuel list is stated, so check compatibility before ordering
- Single filter in the kit, so a spare costs extra

DICMIC 1200KTF7018 Kit
A spin-on particulate filter kit with head, nipple and elbow, rated to 25 GPM for diesel, gasoline and kerosene.
Pros
- Complete kit with filter, head, nipple and elbow
- Rated to 25 GPM at a maximum pressure of 50 PSI
- Suits diesel, gasoline and kerosene, with B20 and E15 blends stated
- Fits FR112, FR1210G, FR610G and related transfer pumps
Cons
- No warranty term is stated
- No micron rating is stated
- 3/4 inch NPT only, with no 1 inch option stated
- No water separation or drain valve stated

ATRACYPART 1 In NPT Kit
A 1 inch NPT spin-on filter kit with a cast-aluminum head, 30 microns and a 25 GPM flow rate.
Pros
- 30 micron spin-on filter with a cast-aluminum head
- Rated to 25 GPM at a maximum pressure of 50 PSI
- 1 inch NPT threads for larger transfer lines
- Removes rust, sand, dirt, scale and lint from the fuel
Cons
- No water separation or drain valve stated
- No biodiesel blend rating is stated
- Single filter in the kit, so a spare costs extra
- No wrench or tape is included

ATRACYPART 10 Micron Filter
A 10 micron spin-on filter for gasoline and diesel that also absorbs water from the fuel.
Pros
- 10 micron filtration, the finest rating here
- Absorbs water from gasoline and diesel
- Simple screw-on installation for quick replacement
- Removes rust, sand, dirt, scale and lint
Cons
- No flow rate, pressure or thread size is stated
- Filter only, with no head or mounting parts stated
- No stated compatibility with biodiesel blends
- No drain valve for removing collected water
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
SEGULER 596-5 2-Pack2-pack of 10 micron 596-5 canisters, 25 GPM and 50 PSI, with a 12 month warranty.Check on Amazon
Fill-Rite 1200KTF7018 KitComplete 10 micron kit with head, elbow and nipples, made in the USA.Check on Amazon
Fill-Rite F1810PM0 Filter10 micron spin-on filter, 1 inch-12 UNF thread, rated to 25 GPM.Check on Amazon
Fill-Rite F1810HM0 Filter10 micron water-sensing spin-on filter, 1 inch-12 UNF thread, rated to 25 GPM.Check on Amazon
Spec comparison
| Filter | GoatGear Score | Micron rating | Flow rate | Max pressure | Thread size | Warranty | Amazon |
|---|---|---|---|---|---|---|---|
| DICMIC 496 Filter Assembly | 9.6/10 | 30 micron | 25 GPM | 150 PSI | 1 in NPT | None stated | View on Amazon |
| HengShine 1200KTF7018 Kit | 9.5/10 | 10 micron | 25 GPM | 50 PSI | 3/4 in NPT | None stated | View on Amazon |
| DICMIC 1200KTF7018 Kit | 9.5/10 | Not stated | 25 GPM | 50 PSI | 3/4 in NPT | None stated | View on Amazon |
| ATRACYPART 1 In NPT Kit | 9.4/10 | 30 micron | 25 GPM | 50 PSI | 1 in NPT | None stated | View on Amazon |
| ATRACYPART 10 Micron Filter | 9.4/10 | 10 micron | Not stated | Not stated | Not stated | None stated | View on Amazon |
These are maker ratings taken from the goat gear listings on 18 November 2026, not our own measurements.
How to choose the best transfer pump filter
Micron rating and flow rate
Micron rating says how fine a particle the element catches, and flow rate says how fast fuel moves through it. Two kits here state 10 microns and two state 30 microns, while the DICMIC 1200KTF7018 kit states no micron rating. Four of the five state a flow rate of 25 GPM, and the ATRACYPART 10 micron filter states none. Match both figures to the pump and the fuel the tank holds.
| Filter | Micron | Flow | Pressure |
|---|---|---|---|
| DICMIC 496 Filter Assembly | 30 micron | 25 GPM | 150 PSI |
| HengShine 1200KTF7018 Kit | 10 micron | 25 GPM | 50 PSI |
| DICMIC 1200KTF7018 Kit | Not stated | 25 GPM | 50 PSI |
| ATRACYPART 1 In NPT Kit | 30 micron | 25 GPM | 50 PSI |
| ATRACYPART 10 Micron Filter | 10 micron | Not stated | Not stated |
Thread size and fit
Thread size decides whether the kit screws onto the pump and tank. Two kits here use 3/4 inch NPT threads and two use 1 inch NPT, while the ATRACYPART 10 micron filter states no thread size. The DICMIC and HengShine kits name FR112, FR1210G, FR610G and related transfer pump models. Check the pump model and the thread size before ordering, and keep the thread seal tape that comes with the kit. See the best gas transfer pump guide to match the pump to the filter.
Water in the fuel
Water in diesel or gasoline causes rust and wear in the pump and engine, so two filters here deal with it directly. The DICMIC 496 separates water and has a drain valve at the bottom of its bowl, and the ATRACYPART 10 micron filter absorbs water from gasoline and diesel. The other three state particulate filtration only. If the tank sits outside through wet weather, a water-separating filter earns its place.
What comes in the box
A complete kit saves a second order. The HengShine kit includes the filter, head, two nipples, an elbow and PTFE tape, and the DICMIC kit includes the filter, head, nipple and elbow. The DICMIC 496 includes a matching wrench and tape instead. The ATRACYPART 10 micron filter comes on its own, so a head and fittings need buying separately. Compare the transfer pump vs submersible pump guide when choosing the pump itself, and see the best liquid transfer pump guide for moving water and other liquids.
Around the Barn
- Fit the filter head where the tank and pump allow room to spin the element off.
- Check the bowl on the DICMIC 496 before each fill and drain water from the valve when the flow slows.
- Keep a spare element on hand so a clogged filter does not stall a fill.
- Store spare filters dry and sealed, and keep fuel handling away from open flame.
FAQs from goat keepers
What micron rating should a transfer pump filter be?
The kits here state 10 or 30 microns: the HengShine and ATRACYPART spin-on state 10 microns, and the DICMIC 496 and ATRACYPART 1 inch kit state 30 microns. Match the rating to what the pump maker calls for.
Will these filters fit my transfer pump?
Check the thread size and the pump model. The DICMIC and HengShine kits list FR112, FR1210G, FR610G and related models, and the thread sizes here are 3/4 inch NPT or 1 inch NPT.
Can a transfer pump filter remove water from fuel?
Two listings here say so. The DICMIC 496 separates water and has a drain valve, and the ATRACYPART 10 micron filter absorbs water from gasoline and diesel. The other listings state particulate filtration only.
Do I need a filter head with a spin-on filter?
A spin-on element needs a head to mount on. Three kits here include a head: the DICMIC 1200KTF7018, the ATRACYPART 1 inch kit and the HengShine kit. The DICMIC 496 has a top cap with inlet and outlet instead.
What fuels can these filters handle?
The listings state gasoline, diesel and kerosene, with biodiesel blends up to B20 and gasohol up to E15 on the DICMIC kit. Aviation fuel and competition fuel are called out as fuels to avoid on two listings.
Behind the Farm Score
The GoatGear Score weighs performance, build, value, safety and warranty. For transfer pump filters, safety means keeping water and particulates out of the fuel system, so the water-separating bowl and drain valve on the DICMIC 496 and the water-absorbing ATRACYPART 10 micron filter earns safety points. None of the five states a warranty term. How we pick explains the weights.
| Product | GoatGear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| DICMIC 496 Filter Assembly | 9.6 | 30 | 21 | 21 | 5 | 0 |
| HengShine 1200KTF7018 Kit | 9.5 | 32 | 22 | 21 | 0 | 0 |
| DICMIC 1200KTF7018 Kit | 9.5 | 29 | 21 | 20 | 0 | 0 |
| ATRACYPART 1 In NPT Kit | 9.4 | 29 | 20 | 20 | 0 | 0 |
| ATRACYPART 10 Micron Filter | 9.4 | 26 | 19 | 18 | 3 | 0 |
A score of 9.2 marks the weakest point total on our scale and 9.8 the strongest; totals in between are placed proportionally.
More from the barn
See every farm water guide and all tractor and farm implements guides. Also see our best gas transfer pump. Also see our best electric water transfer pump.
More picks: browse feeders and waterers, milking gear and tractor implements.
