Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Single Speed vs Variable Speed Clippers: Which One Should You Buy?

Single speed vs variable speed clippers: how each speed setup cuts, which chores each suits, and the listed speeds and run times to compare before you buy.

Single Speed vs Variable Speed Clippers: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Andis 24820 EasyClip Single-Speed Clipper Kit with CeramicAndis 24820 EasyClip Single-Speed Clipper Kit with Ceramic9.5/10View on Amazon
  2. 2Andis Easy Clip Cordless II Single-Speed ClipperAndis Easy Clip Cordless II Single-Speed Clipper9.3/10View on Amazon
  3. 3Oster Clipmaster Heavy-Duty Clippers with #10 CryogenX BladeOster Clipmaster Heavy-Duty Clippers with #10 CryogenX Blade9.6/10View on Amazon
  4. 4Wahl Professional Animal KMC+ 2-Speed Cordless ClipperWahl Professional Animal KMC+ 2-Speed Cordless ClipperView on Amazon
  5. 5Univen Single Speed Clipper Toggle Switch and Nut CompatibleUniven Single Speed Clipper Toggle Switch and Nut CompatibleView on Amazon
  6. 6Oster Professional A5 Turbo 2 Speed ClipperOster Professional A5 Turbo 2 Speed ClipperView on Amazon
  7. 7Sheep Shears 500W Professional 6 SpeedsSheep Shears 500W Professional 6 SpeedsView on Amazon
  8. 8550W Professional Electric Sheep Clipper550W Professional Electric Sheep ClipperView on Amazon
  9. 9Electric Sheep ShearsElectric Sheep ShearsView on Amazon

A goat that fidgets through a full-body clip will stand still for a quick face trim, which is the real question behind single speed vs variable speed clippers. A single speed clipper runs at one speed every time you switch it on, while a variable speed clipper lets you shift between two or more speeds, or a dial of them, for different jobs. This guide compares what the listings state about speeds, strokes per minute, run time and cords so you can match the speed setup to the animals you clip. Every number below comes from a product listing; where a listing gives no figure, we say so.

Also worth comparing

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Single speed vs variable speed clippers: the short answer

Pick single speed when your clipping is one kind of work, repeated: a single speed clipper has nothing to adjust, so it suits a routine full-body clip done the same way each time. Pick variable speed when the job changes during the session: low speed for faces, ears and sensitive areas, high speed for thick body coats and mats. If you would rather go straight to the products, our best goat clippers roundup scores five livestock clippers on these points.

How single speed clippers work

A single speed clipper runs its motor at one fixed speed. The Oster Clipmaster listing states a single speed rotary motor delivering over 2,100 strokes per minute, with a 45W motor and a 12 ft cord, and says it handles thick, matted coats. The Andis EasyClip listing states a single-speed motor described as comfortable and quiet, with a 12 ft power cord and 4 attachment combs in 1/8″, 1/4″, 3/8″ and 1/2″.

One speed means one decision fewer at the stand, which is why single speed clippers suit barns where several people clip or where the routine never changes. The trade-off is control: with one speed there is no slower setting for a nervous goat’s ears and no faster setting to push through a heavy coat. What you get is what the motor gives, every time.

How variable speed clippers work

A variable speed clipper offers two or more speeds, usually arranged so the low end gives precision and the high end gives power. The Andis UltraEdge Super 2-Speed listing states a two-speed rotary motor operating at 3400 to 4400 strokes per minute for thick, long hair. The Andis Excel 68520 listing states a five-speed rotary motor with a 14 ft cord, and the Andis BGRC 63700 listing states a five-speed rotary motor at 2900 strokes per minute, with a stated range of 1,800 to 3,800 strokes per minute.

Dual speed listings frame the split the same way. The TPOB Mini Play listing states a dual speed motor of 6000 to 7500 RPM: low speed for precision work and sensitive areas, high speed for bulk cutting through thick, coarse hair. The Wahl KMC+ listing states a 2-speed clipper with a 2-hour run time, a 60-minute charge and cord or cordless operation, plus a 10-foot charging cord.

More speeds add a control step to every clip, but they also let one tool cover two jobs: a low speed for faces and blending, a high speed for full-body work on heavy coats. For a small herd where one clipper does everything, that range earns its keep.

Single speed vs variable speed at a glance

Type Listed speeds How it cuts Suits Watch for
Single speed One speed; over 2,100 SPM on the Oster listing Same power every time Routine clips, simple routines No slower or faster setting
2-speed 3,400 to 4,400 SPM on the Andis UltraEdge listing Low for precision, high for bulk Faces plus body work Two speeds only
5-speed 1,800 to 3,800 SPM on the Andis BGRC listing Dial-in control across jobs Mixed herds, varied coats More to adjust at the stand
Dual speed 6,000 to 7,500 RPM on the TPOB listing Precision low, bulk-cut high Detail plus heavy coats RPM, not SPM, on that listing

Which should you buy?

Match the speed setup to the variety of your clipping. If you clip one herd the same way each season, a single speed model like the Oster Clipmaster, with over 2,100 strokes per minute and a 45W motor, does the job with nothing to fiddle with. If you move between a full-body clip and careful face work in one session, a variable speed model covers both: the Andis UltraEdge’s 2-speed rotary motor at 3400 to 4400 strokes per minute, or the Andis Excel’s 5-speed motor with its 14 ft cord.

Then check the figures the speed does not set: run time and charge for cordless models, cord length for corded ones. The Wahl KMC+ listing states a 2-hour run time with a 60-minute charge, the KEMEI listing states a 1.5 hour charge for 120 minutes of use, and the Andis BGRC spec table states a 3 hour run time. Read our cordless clippers for goats guide if the barn has no nearby outlet.

Read the listing twice

Clipper listings contradict themselves, and the speed and power source are the usual places it happens:

  • Andis BGRC 63700: the bullets say it converts to cordless with a battery pack and charger sold separately, while the spec table lists it as battery powered with a 3 hour run time.
  • Andis UltraEdge Super 2-Speed: the bullets write a 14-inch cord, which would barely reach the animal; confirm the cord length before you buy.
  • Wahl 9314-300 Quick Cut Performer: the listing is a 10 piece kit with almost no stated specs, so there is no speed figure to compare.

Trust the title and bullets over the spec table, and confirm the speed count in the title or bullets before you buy: every speed figure in these listings is named there, not buried in the specs.

What this guide does not cover

This guide covers speed setups only. It does not cover motor types, blade sharpening, clipping technique or any animal health question. For health questions, ask your veterinarian.

FAQs from goat keepers

Is variable speed better than single speed for goats?

Neither wins outright. Single speed suits a routine clip done the same way each time, while variable speed suits sessions that mix careful face work with full-body clipping on heavy coats.

What speed do I need for thick coats?

These listings state a range: the Oster single speed states over 2,100 strokes per minute for thick, matted coats, the Andis UltraEdge 2-speed states 3400 to 4400 strokes per minute for thick, long hair, and the TPOB dual speed states 6000 to 7500 RPM for bulk cutting.

Do variable speed clippers run longer on battery?

Run time is stated per model, not per speed setup. The Wahl KMC+ 2-speed listing states a 2-hour run time with a 60-minute charge, the KEMEI listing states a 1.5 hour charge for 120 minutes of use, and the Andis BGRC 5-speed spec table states a 3 hour run time.

Are single speed clippers quieter?

Quiet is a maker claim on individual listings, not a feature of the speed setup. The Andis EasyClip single-speed listing describes its motor as comfortable and quiet, but compare the noise figure on the listing you are reading.

Can one clipper work both corded and cordless?

Some do. The Wahl KMC+ listing states cord or cordless operation with a 10-foot charging cord. The Andis BGRC listing says it converts to cordless with a battery pack sold separately, though its spec table lists it as battery powered.

More from the barn

See every goat clipper guide and all grooming and handling guides.

More picks: best goat clippers, cordless clippers for goats, best electric sheep shears and goat hoof trimmers.