Goat Fence Calculator
Goats test every fence they live behind, so it pays to plan the line before buying wire. Enter the size of the pen, the gates and the type of fence to get the length, the posts and the wire to order.
Fence for a goat pen
About 10 ft (3 m) suits most livestock fence. Follow the wire maker's spacing if it differs.
Printed on the roll or the listing, in the unit above.
Extension guidance for goats: 4 to 7 wires, closer near the ground.
288 ft of fence
Post spacing and strand count are from WSU Extension; the 48-inch height is from Penn State Extension. Corners and gates also need bracing, and rough or curved ground needs extra posts, so add a few to the count.
How the calculation works
- Fence length. Twice the length plus twice the width, minus the gate openings.
- Posts. One post at each corner, then enough line posts on each side that no gap is wider than the spacing you set. Each gate adds a post on both sides.
- Wire. Woven wire: fence length divided by the roll length, rounded up. Electric: fence length times the number of strands.
Example: a 100 by 50 ft pen with one 12 ft gate needs 288 ft of fence and 30 posts at 10 ft spacing, plus 2 gate posts.
What extension services say about goat fence
- Height. Penn State Extension calls electrified woven wire or 2 by 4 ft livestock panels at least 48 inches high the best fencing for goats.
- Electric. WSU Extension lists 4 to 7 wires for goats and sheep, with closer spacing near the ground, and small-mesh woven wire for horned breeds.
- Posts. WSU Extension gives about 10 ft between posts for most animals.
Sources: Dairy goat production, Penn State Extension; Farm fencing systems for livestock, WSU Extension.
