
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
FUHKQE 5-Pack Blade Set9.6/10View on Amazon - 2
DODAER 8-Pc Blade Set9.5/10View on Amazon - 3
Audoc 4-Pc Blade Set9.4/10View on Amazon - 4
Wahl 1045 Blade Set9.3/10View on Amazon
A clipper blade that leaves the coat ragged may be the wrong size for the job, and knowing the types of clipper blades helps you pick the right cut length. This guide covers the types by size and material, with cut lengths from the listings and the clippers each set fits. The sets below cover the range, from a wide set of sizes to a small replacement set.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | FUHKQE 5-Pack Blade Set | 9.6/10 | Buy on Amazon |
| 2 | DODAER 8-Pc Blade Set | 9.5/10 | Buy on Amazon |
| 3 | Audoc 4-Pc Blade Set | 9.4/10 | Buy on Amazon |
| 4 | Wahl 1045 Blade Set | 9.3/10 | Buy on Amazon |

FUHKQE 5-Pack Blade Set
A 5-pack set of detachable ceramic blades in sizes 30, 10, 7FC, 5FC and 4FC, cutting from 0.5mm to 9.5mm.
Pros
- Sizes from 0.5mm to 9.5mm in one set
- Rounded tips help protect the skin
- Snap on with no tools required
- 440C stainless comb and titanium-coating ceramic shear blade
Cons
- No warranty term is stated
- No 40 or 15 size in the set
- No 3-3/4FC size for the longest cut
- No case or storage is listed

DODAER 8-Pc Blade Set
An 8-piece set of ceramic blades from 0.25mm to 13mm for Andis, Oster A5 and Wahl KM10 clippers.
Pros
- Sizes from 0.25mm to 13mm in one set
- Covers 40 to 3-3/4FC in one set
- 440C stainless comb and titanium-coating ceramic shear blade
- More heat resistant than carbon steel, with less noise
Cons
- No warranty term is stated
- No case or storage is listed
- No oil or cleaning guidance is stated
- The 40 size cuts at 1/100 inch, which suits close trimming only

Audoc 4-Pc Blade Set
A 4-piece set of detachable ceramic and stainless steel blades in sizes 3FC, 4FC, 5FC and 7FC for Andis clippers.
Pros
- Detachable ceramic and stainless steel blades
- Fits Andis UltraEdge and CeramicEdge series
- Heat resistant for cooler cutting
- The 7FC blade leaves hair at 1/8 inch (3.2mm)
Cons
- No warranty term is stated
- Only the 7FC cut length is stated
- No case or storage is listed
- No 30 or 10 size in the set

Wahl 1045 Blade Set
A 2-piece blade set that fits Wahl home kit models and several numbered Wahl clipper models.
Pros
- Fits models 9100, 9200, 9400, 9600 and 9700
- Fits Basic, Multi-Cut, Premium and Deluxe Home Kits
- 2-piece set for home kit clippers
- Measures 6.0 x 2.0 x 4.0 inches
Cons
- No warranty term is stated
- No blade sizes are stated
- No materials are stated
- No cut lengths are stated
As an Amazon Associate I earn from qualifying purchases.
Also worth comparing
3-Pack Size 10 Ceramic Pet Clipper Blades Compatible withCheck price on Amazon
7 Pcs Clipper Blades 0.1-6.3mm Compatible with Oster ClassicCheck price on Amazon
Detachable Ceramic Pet Blades Compatible with Andis & OsterCheck price on Amazon
10# Grooming Ceramic Pet Clipper Blades Compatible with AndisCheck price on Amazon
4FC Grooming Ceramic Pet Clipper Blades Compatible with AndisCheck price on Amazon
30# Grooming Ceramic Pet Clipper Blades Compatible with AndisCheck price on Amazon
Types of clipper blades: the short answer
The short answer is that blades differ by size number, by cut length and by material. Size numbers run from 40, the closest cut, to 3-3/4FC, the longest cut in the listings here, and the letters FC mark a finishing cut. The DODAER set covers 40 to 3-3/4FC, the FUHKQE set covers 30 to 4FC, and the Audoc set covers 3FC to 7FC. Comb blades here are 440C stainless steel and shear blades are titanium-coating ceramic, which the listings state is more heat resistant than carbon steel.
The gear for the job
The sets below cover the sizes, the cut lengths and the clippers each blade fits.
Blade sizes and cut lengths
Cut length is the hair left after the clip, and the size number sets it. The DODAER listing gives the full range, from 1/100 inch (0.25mm) on the 40 blade to 1/2 inch (13mm) on the 3-3/4FC blade. The FUHKQE set gives cut lengths from 0.5mm on the 30 blade to 9.5mm on the 4FC blade. The Audoc listing states only the 7FC cut length, 1/8 inch (3.2mm), and the Wahl 1045 (on Amazon) listing states no cut lengths at all. Pick the size by the coat length you want to leave, not by the number alone.
| Blade size | Cut length | Amazon |
|---|---|---|
| 40 | 1/100 inch (0.25mm) | |
| 30 | 1/50 inch (0.5mm) | |
| 15 | 3/64 inch (1.2mm) | |
| 10 | 1/16 inch (1.5mm) | |
| 7FC | 1/8 inch (3.2mm) | |
| 5FC | 1/4 inch (6.3mm) | |
| 4FC | 3/8 inch (9.5mm) | |
| 3-3/4FC | 1/2 inch (13mm) |
Materials: stainless steel and ceramic
The listings here use the same materials. The comb blade is 440C stainless steel and the shear blade is titanium-coating ceramic, which the DODAER, Audoc and FUHKQE listings all state. The listings state the ceramic shear blade is more heat resistant than traditional carbon steel and makes less noise, and that water will not rust it. The FUHKQE listing adds that the blades are easy to clean with clipper spray and can be oiled for extended life. See the best clipper cleaning brushes for the brush step. The Wahl 1045 listing states no materials, so check the blade itself before you buy a replacement set.
Fit: which clippers take these blades
These are detachable blades, so they snap onto clippers that take the same fitting. The DODAER set fits Andis clippers and most Oster A5 and Wahl KM10 series clippers. The Audoc set fits Andis UltraEdge and CeramicEdge series clippers and most Oster A5 and Wahl KM series clippers. The FUHKQE set fits Andis clippers and most Oster A5 and Wahl KM series clippers. The Wahl 1045 set fits Wahl models 9100, 9200, 9400, 9600 and 9700 and the Basic, Multi-Cut, Premium and Deluxe Home Kits. If the blade set you buy fails to fit your clipper, the DODAER and Audoc listings say to contact customer service. See the best clipper blades for goats roundup for scored picks.
Read the listing twice
The DODAER listing gives cut lengths in inches and millimetres, and the inch and millimetre figures agree across the set. The Audoc listing states the 7FC cut length only, so the other sizes in the set carry no stated cut length. The Wahl 1045 listing is the thinnest here: it states fit models only, with no sizes, materials or cut lengths. The FUHKQE listing gives cut lengths from 0.5mm to 9.5mm in the title and the bullets agree.
FAQs from goat keepers
What do clipper blade numbers mean?
The number sets the cut length. In the DODAER listing, the 40 blade cuts at 1/100 inch (0.25mm) and the 3-3/4FC blade cuts at 1/2 inch (13mm), with the 30, 15, 10, 7FC, 5FC and 4FC sizes in between.
What does FC mean on a clipper blade?
FC marks a finishing cut. The listings here give FC sizes from 3FC to 7FC, with cut lengths from 1/8 inch (3.2mm) on the 7FC blade to 1/2 inch (13mm) on the 3-3/4FC blade.
Are ceramic clipper blades better than steel?
The listings state the titanium-coating ceramic shear blade is more heat resistant than traditional carbon steel and makes less noise. The comb blade in these sets is 440C stainless steel, so each blade uses ceramic and steel together.
Will these blades fit my clipper?
Check the fit list. The DODAER set fits Andis clippers and most Oster A5 and Wahl KM10 series clippers, the Audoc set fits Andis UltraEdge and CeramicEdge series, and the FUHKQE set fits Andis and most Oster A5 and Wahl KM series clippers. The Wahl 1045 set fits listed Wahl models only.
How do I clean clipper blades?
The FUHKQE listing states the blades are easy to clean with clipper spray and can be oiled for extended life. Brush the hair out of the teeth, spray the blades clean and oil them before the next clip.
More from the barn
See every goat clipper guide and all grooming and handling guides.
More picks: best goat clippers, best clipper blades for goats, best clipper blade oil and best clipper cleaning brushes.
