
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallVEVOR 1/4 in Skid Steer Plate9.7/10View on Amazon - 2
Best Thick PlateYITAMOTOR 3/8 in Mount Plate9.6/10View on Amazon - 3
Best Stated DimensionsECOTRIC 3/8 in Mount Plate9.6/10View on Amazon - 4
Best 3-Point ConversionYITAMOTOR 3-Point Adapter9.5/10View on Amazon - 5
Best Light 1/4 in PlateGarveeLife 1/4 in Mount Plate9.4/10View on Amazon
Hay scattered across the barn floor means the bucket came off the loader again, and the best quick attach plate for tractor work is the plate that matches the loader arms and the attachment it has to carry. This guide compares quick attach plates and a rear hitch adapter by thickness, load capacity, weight and fit, using only what each listing publishes.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall VEVOR 1/4 in Skid Steer Plate: 3,000 lbs capacity with Grade 50 steel and a 1/4 in plate Check price on Amazon
Best Thick Plate YITAMOTOR 3/8 in Mount Plate: 3/8 in Grade 50 steel at 101 lbs, welds or bolts on Check price on Amazon
Best Stated Dimensions ECOTRIC 3/8 in Mount Plate: Outside 46 in, inside 45 in, 3/8 in plate and top bar Check price on Amazon
Best 3-Point Conversion YITAMOTOR 3-Point Adapter: Converts a Category 1 3-point hitch to quick attach, pins included Check price on Amazon
Best Light 1/4 in Plate GarveeLife 1/4 in Mount Plate: 1/4 in plate at 63.38 lbs, welds or bolts on Check price on Amazon
The gear we picked
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | VEVOR 1/4 in Skid Steer Plate | 9.7/10 | Buy on Amazon |
| 2 | YITAMOTOR 3/8 in Mount Plate | 9.6/10 | Buy on Amazon |
| 3 | ECOTRIC 3/8 in Mount Plate | 9.6/10 | Buy on Amazon |
| 4 | YITAMOTOR 3-Point Adapter | 9.5/10 | Buy on Amazon |
| 5 | GarveeLife 1/4 in Mount Plate | 9.4/10 | Buy on Amazon |

VEVOR 1/4 in Skid Steer Plate
A 1/4 in Grade 50 steel plate rated for 3,000 lbs, with a 45 inch internal width for skid steers and tractors.
Pros
- 3,000 lbs load capacity stated
- Grade 50 steel at 1/4 in thick
- Fully welded with a rust- and corrosion-resistant treatment
- Fits John Deere, Kubota, Bobcat and Mahindra machines
Cons
- Thinner than the 3/8 in plates here
- No warranty term is stated
- Needs bolting or welding to the attachment before use
- The 45 inch internal width suits only loaders that match it

YITAMOTOR 3/8 in Mount Plate
A 3/8 in Grade 50 steel plate at 101 lbs, with a 45.2 inch outer width and a 44.29 inch inner width.
Pros
- 3/8 in Grade 50 structural steel
- 101 lbs of plate for heavy loads
- Welds or bolts to plows, forks and other accessories
- Converts attachments to a standard quick-connect hitch
Cons
- No load capacity is given
- 101 lbs, the heaviest plate here
- No warranty term is stated
- The 44.29 inch inner width is narrower than the 45 inch plates

ECOTRIC 3/8 in Mount Plate
A 3/8 in Grade 50 steel plate with a 3/8 in top bar, 46 inches outside and 45 inches inside.
Pros
- 3/8 in plate with a 3/8 in top bar
- Grade 50 structural steel
- Full dimensions stated: 46 in outside, 45 in inside, 18.5 in high
- Every part firmly welded
Cons
- No load capacity is given
- 95 lbs adds weight to the loader
- Unpainted finish leaves the steel surface exposed
- Suits only loaders with a skid steer style quick tach

YITAMOTOR 3-Point Adapter
A Category 1 3-point to skid steer adapter with pins included and no welding needed.
Pros
- Converts a Category 1 3-point hitch to universal quick attach
- Top and lower link pins included
- Pin-on install with no welding
- Powder-coated finish for outdoor durability
Cons
- Fits Category 1 3-point hitches only
- No load capacity is given
- 91.05 lbs hangs on the rear hitch
- Serves the rear hitch only; the front loader still needs its own plate

GarveeLife 1/4 in Mount Plate
A 1/4 in plate at 63.38 lbs, with a 45.2 inch outer width and a 44.29 inch inner width.
Pros
- 1/4 in plate for plows, forks and debris clearing
- Welds or bolts to tractor accessories
- Fits Kubota and Bobcat skid steers and tractors
- Lighter than the 3/8 in plates at 63.38 lbs
Cons
- Thinner than the 3/8 in plates here
- No load capacity is given
- Heavier than the VEVOR 1/4 in plate at the same thickness
- The 44.29 inch inner width suits only loaders that match it
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
VEVOR 1/2 in Skid Steer Plate1/2 in Grade 50 steel rated for 9,000 lbsCheck on Amazon
ECOTRIC 1/4 in Mount Plate1/4 in plate, 72 lbs, with a 3/8 in top barCheck on Amazon
YITAMOTOR 5/16 in Mount Plate5/16 in Grade 50 steel at 82 lbs, reinforced top barCheck on Amazon
Sulythw Latch Box AdapterConverts a pin style loader to quick attach, 37 lbsCheck on Amazon
YINTATECH 1/2 in Mount Plate1/2 in Grade 50 steel plate at 120.0 lbsCheck on Amazon
Spec comparison
| Plate | GoatGear Score | Thickness | Load capacity | Weight | Inside width | Amazon |
|---|---|---|---|---|---|---|
| VEVOR 1/4 in Skid Steer Plate | 9.7/10 | 1/4 in | 3,000 lbs | 57.98 lbs | 45 in | View on Amazon |
| YITAMOTOR 3/8 in Mount Plate | 9.6/10 | 3/8 in | Not stated | 101 lbs | 44.29 in | View on Amazon |
| ECOTRIC 3/8 in Mount Plate | 9.6/10 | 3/8 in | Not stated | 95 lbs | 45 in | View on Amazon |
| YITAMOTOR 3-Point Adapter | 9.5/10 | Not stated | Not stated | 91.05 lbs | Not stated | View on Amazon |
| GarveeLife 1/4 in Mount Plate | 9.4/10 | 1/4 in | Not stated | 63.38 lbs | 44.29 in | View on Amazon |
Sizes and capacities are the manufacturer’s numbers as each listing states them, pulled 20 November 2026.
How to choose the best quick attach plate for tractor
Match the inside width first
Measure the inside width of the loader arms before ordering. The plates here list inside widths of 44.29 and 45 inches, and the outside widths run from 45.2 to 46 inches, so a plate that looks right can still sit wrong on the arms. The VEVOR 1/4 in plate lists a 45 inch internal width, while the YITAMOTOR and GarveeLife plates list 44.29 inches inside.
Thickness and load capacity
Plate thickness runs from 1/4 in to 3/8 in here, and only the VEVOR 1/4 in plate states a load capacity, at 3,000 lbs. The two 3/8 in plates weigh 95 and 101 lbs, against 57.98 and 63.38 lbs for the 1/4 in plates, so the thicker plate adds weight to the loader. Check the capacity the maker lists and stay within the loader rating, and never lift beyond what the tractor and loader allow.
| Plate | Thickness | Weight | Load capacity |
|---|---|---|---|
| VEVOR 1/4 in | 1/4 in | 57.98 lbs | 3,000 lbs |
| YITAMOTOR 3/8 in | 3/8 in | 101 lbs | Not stated |
| ECOTRIC 3/8 in | 3/8 in | 95 lbs | Not stated |
| YITAMOTOR adapter | Not stated | 91.05 lbs | Not stated |
| GarveeLife 1/4 in | 1/4 in | 63.38 lbs | Not stated |
Weld, bolt or pin it on
Four of the plates weld or bolt to the attachment, so pick the mounting the job allows. The YITAMOTOR adapter is the odd one out: it pins onto a Category 1 3-point hitch with the top and lower link pins included, and the listing states no welding is needed. Pallet forks, plows and buckets all mount the same way once the plate is on, so see the best tractor pallet forks and best quick attach for tractor bucket guides when the plate is for a new attachment.
The 3-point adapter is a different job
The YITAMOTOR adapter does not replace a plate. It converts a Category 1 3-point hitch at the rear of the tractor so the rear hitch can take skid steer quick attach equipment such as pallet fork frames, snow plows and buckets. If the front loader needs a plate, buy a plate, since the adapter only serves the rear hitch. For the hitch itself, see the best three point hitch receiver for tractor guide.
Around the Barn
- Measure the loader arms and match the inside width before the plate goes on.
- Bolt the plate on first and check the fit on the arms before welding it to an attachment.
- Use the adapter’s included top and lower link pins for the 3-point hookup, and keep the pins with the adapter.
- Brush packed mud and hay off the plate after the day’s work so the mount stays clean.
- Check the welds and bolts when the plate comes off for the season.
FAQs from goat keepers
What size quick attach plate fits my tractor?
Measure the inside width of the loader arms and match it to the plate. The plates here list inside widths of 44.29 and 45 inches, with outside widths from 45.2 to 46 inches.
Is a 1/4 in plate strong enough for tractor work?
The VEVOR 1/4 in plate lists a 3,000 lbs load capacity and Grade 50 steel, so check the capacity the maker lists for the plate you buy and stay within the loader rating. The GarveeLife 1/4 in plate lists no load capacity.
Do quick attach plates need welding?
The four plates here weld or bolt to the attachment. The YITAMOTOR 3-point adapter pins on with the top and lower link pins included, and its listing states no welding is needed.
What is the difference between a 3/8 in plate and a 1/4 in plate?
Thickness and weight. The 3/8 in plates here weigh 95 and 101 lbs, while the 1/4 in plates weigh 57.98 and 63.38 lbs. Both thicknesses use Grade 50 steel where the listing states a grade.
Can a 3-point hitch use skid steer attachments?
Yes, with an adapter. The YITAMOTOR adapter converts a Category 1 3-point hitch to accept universal quick attach equipment such as pallet fork frames, snow plows and buckets.
Behind the Farm Score
The GoatGear Score weighs performance, build, value, safety and warranty. For quick attach plates, performance means stated load capacity and plate thickness, build means stated steel grade and welding, and safety means a weld or bolt fit that holds, with stated corrosion resistance. None of the five states a warranty term, so no product earns warranty points. How we pick explains the weights.
| Product | GoatGear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| VEVOR 1/4 in Skid Steer Plate | 9.7 | 32 | 22 | 21 | 7 | 0 |
| YITAMOTOR 3/8 in Mount Plate | 9.6 | 29 | 21 | 20 | 7 | 0 |
| ECOTRIC 3/8 in Mount Plate | 9.6 | 28 | 21 | 20 | 7 | 0 |
| YITAMOTOR 3-Point Adapter | 9.5 | 27 | 20 | 20 | 5 | 0 |
| GarveeLife 1/4 in Mount Plate | 9.4 | 26 | 19 | 19 | 5 | 0 |
Our scores stay inside 9.2 and 9.8, with point totals stretched across that gap evenly, so the item with more points shows the bigger score.
More from the barn
See every tractor implement guide and all tractor attachment guides. Also see our best quick attach for tractor bucket. Also see our best box blade. Also see our best rotary cutter for tractor.
More picks: browse tractor pallet forks, quick hitch receivers, loader buckets and rotary cutters.
