
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallCUIOFREE 29×48 Shed Ramp9.7/10View on Amazon - 2
Best AluminumLonsge 33×48 Shed Ramp9.7/10View on Amazon - 3
Best Steel RibsVNN 29×48 Shed Ramp9.6/10View on Amazon - 4
Best Wide PairTraiNexalign 36×48 Shed Ramp9.6/10View on Amazon - 5
Best Narrow RampVEVOR 39×9 Trailer Ramp9.5/10View on Amazon
The riding mower waits in the barn while the shed door lip stops it cold, and the best metal tractor ramp turns that lip into a smooth slope for mowers, ATVs and lawn tractors. We compared the metal ramps in this guide by rated capacity, size, material, surface grip and stated mounting, using only what each listing publishes.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall CUIOFREE 29×48 Shed Ramp: 1600 lb capacity, the highest here, on a 29 by 48 in pair Check price on Amazon
Best Aluminum Lonsge 33×48 Shed Ramp: Aluminum alloy with anti-slip strips, rated 1500 lb per pair Check price on Amazon
Best Steel Ribs VNN 29×48 Shed Ramp: Two reinforced steel ribs, 1500 lb, 12.7-degree tilt Check price on Amazon
Best Wide Pair TraiNexalign 36×48 Shed Ramp: 36 by 48 in pair, 1500 lb, 48 lb item weight Check price on Amazon
Best Narrow Ramp VEVOR 39×9 Trailer Ramp: 39 by 9 in steel ramps, 1200 lb total, claw plates Check price on Amazon
The gear we picked
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | CUIOFREE 29x48 Shed Ramp | 9.7/10 | Buy on Amazon |
| 2 | Lonsge 33x48 Shed Ramp | 9.7/10 | Buy on Amazon |
| 3 | VNN 29x48 Shed Ramp | 9.6/10 | Buy on Amazon |
| 4 | TraiNexalign 36x48 Shed Ramp | 9.6/10 | Buy on Amazon |
| 5 | VEVOR 39x9 Trailer Ramp | 9.5/10 | Buy on Amazon |

CUIOFREE 29x48 Shed Ramp
A 2-pack of 29 by 48 in steel shed ramps rated at 1600 lb with a punched anti-slip surface.
Pros
- 1600 lb capacity, the highest among these five
- Punched anti-slip surface drains water and mud
- Pre-drilled holes for permanent mounting
- Rustproof build for outdoor use in any weather
Cons
- 29 in length gives a steeper approach than the 39 in VEVOR ramps
- No warranty term is stated
- The 48 in pair width needs a wide shed doorway
- Two separate ramps to set and align for every crossing

Lonsge 33x48 Shed Ramp
A 33 by 48 in aluminum alloy ramp pair rated at 1500 lb with anti-slip strips over a punch plate surface.
Pros
- 1500 lb per pair with reinforcing square tubing underneath
- Anti-slip strips plus punch plate for grip in wet weather
- 12.7-degree tilt for thresholds 3.5 to 6.5 in high
- Rustproof and waterproof aluminum for outdoor storage
Cons
- No warranty term is stated
- The 48 in pair width needs a wide shed doorway
- 1500 lb per pair, below the 1600 lb CUIOFREE pair
- Bolt-on mounting takes longer than ramps that just sit in place

VNN 29x48 Shed Ramp
A 29 by 48 in alloy iron ramp pair rated at 1500 lb with two reinforced steel ribs and a punched hole surface.
Pros
- 1500 lb capacity with two reinforced steel ribs
- 12.7-degree tilt for a smooth climb
- Punched hole surface grips and drains water
- Handle included for moving and repositioning
Cons
- 1500 lb per pair, below the 1600 lb CUIOFREE pair
- Each piece measures 29 by 24 in, so the pair must be spaced to match tire width
- 29 in length gives a steeper approach than the 39 in VEVOR ramps
- The pair covers 48 in wide, so narrow shed doors need measuring first

TraiNexalign 36x48 Shed Ramp
A 36 by 48 in ramp pair rated at 1500 lb with an anti-slip punch plate and reinforced edges.
Pros
- 1500 lb capacity for mowers, motorcycles and tractors
- Anti-slip punch plate with dense punched holes
- Reinforced edges and solid structure
- Lightweight design makes the ramps easy to move
Cons
- 1500 lb per pair, below the 1600 lb CUIOFREE pair
- 36 in length is shorter than the 39 in VEVOR ramps
- 48 in wide as a pair, so measure the doorway first
- Two pieces to place, align and store

VEVOR 39x9 Trailer Ramp
A pair of 39 by 9 in zinc-coated steel ramps rated at 1200 lb total, 600 lb per ramp, with claw plates.
Pros
- 39 in length, the longest here, for a gentler slope
- Claw plates grip steps and hold the ramps in place
- 18.08 lb item weight with a carry handle
- Dense perforations add traction and drain water
Cons
- 1200 lb total, the lowest capacity here
- 9 in wide, narrower than the 24 in wide pieces of the VNN pair
- Not suitable for trucks, per the maker
- Rated for heights of 3.9 to 11.8 in only
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
VNN 36×48 Shed Ramp36 by 48 in pair, 1500 lb, with a 1-year warranty stated.Check on Amazon
Kryonix 29×48 Shed Ramp2000 lb capacity, the highest in the data, on a 29 by 48 in pair.Check on Amazon
Ryansunoro 36×24 Shed RampSingle 36 by 24 in ramp rated 1100 lb with a 12.7-degree tilt.Check on Amazon
Lupar 29×48 Shed RampSteel 29 by 48 in pair rated 1500 lb with a powder-coated finish.Check on Amazon
COZIVIE 48×48 Shed Ramp48 by 48 in pair rated 1500 lb with a 1-year warranty stated.Check on Amazon
Spec comparison
| Ramp | GoatGear Score | Capacity | Size | Material | Weight | Amazon |
|---|---|---|---|---|---|---|
| CUIOFREE 29×48 Shed Ramp | 9.7/10 | 1600 lb | 29 x 48 in | Steel | Not stated | |
| Lonsge 33×48 Shed Ramp | 9.7/10 | 1500 lb | 33 x 48 in | Aluminum alloy | Not stated | |
| VNN 29×48 Shed Ramp | 9.6/10 | 1500 lb | 29 x 48 in | Alloy iron | Not stated | |
| TraiNexalign 36×48 Shed Ramp | 9.6/10 | 1500 lb | 36 x 48 in | Not stated | 48 lb | |
| VEVOR 39×9 Trailer Ramp | 9.5/10 | 1200 lb total | 39 x 9 in | Zinc-coated steel | 18.08 lb |
Figures come from the product pages and reflect what the maker rates, current as of 21 November 2026.
How to choose the best metal tractor ramp
Capacity and what you load
Start with the machine, not the ramp. Capacities here run from 1200 lb total on the VEVOR pair to 1600 lb on the CUIOFREE pair, with the VNN, Lonsge and TraiNexalign pairs each rated at 1500 lb. The VEVOR pair splits its rating at 600 lb per ramp, so each ramp carries its own share of the load. Match the rating to the machine you load and stay within the rated capacity the maker lists.
Length, width and the slope
Length sets the slope. The VEVOR pair runs 39 in long, the TraiNexalign pair 36 in, the Lonsge pair 33 in, and the VNN and CUIOFREE pairs 29 in. The VNN and Lonsge state a 12.7-degree tilt angle, and the Lonsge suits thresholds 3.5 to 6.5 in high, while the VEVOR recommends heights of 3.9 to 11.8 in. Width matters as much as length: the shed pairs span 48 in as a pair, and the VNN pieces measure 29 by 24 in each, so check the doorway and the tire width before ordering.
| Ramp | Length | Capacity | Tilt |
|---|---|---|---|
| CUIOFREE 29×48 | 29 in | 1600 lb | Not stated |
| Lonsge 33×48 | 33 in | 1500 lb | 12.7 degrees |
| VNN 29×48 | 29 in | 1500 lb | 12.7 degrees |
| TraiNexalign 36×48 | 36 in | 1500 lb | Not stated |
| VEVOR 39×9 | 39 in | 1200 lb | Not stated |
Surface grip and weather
Every ramp here uses a punched or perforated surface, and the holes drain water while the edges grip the tires. The Lonsge adds integrated anti-slip strips over its punch plate for wet grass and morning dew, and the VEVOR uses dense perforations with claw plates on steps. For outdoor storage, the CUIOFREE and TraiNexalign state rustproof or corrosion-resistant builds, the Lonsge states a rustproof and waterproof aluminum build, and the VEVOR uses zinc-coated steel. See how the materials compare in our aluminum vs steel livestock loading ramp guide.
Mounting and moving the pair
A ramp that shifts under load is no help, so check the mounting. The CUIOFREE, VNN and Lonsge pairs have pre-drilled holes, the VNN needs 3 screws per ramp, and the Lonsge includes bolts for its bolt-on installation. The VEVOR pair grips steps with wide claw plates instead of screws. For moving the pair, the VNN, Lonsge and VEVOR ramps include handles, and the VEVOR item weight is listed at 18.08 lb against 48 lb for the TraiNexalign pair. See the longer options in our best livestock loading ramp for trailers guide when a shed ramp is too short.
Around the Barn
- Set each ramp on firm, level ground and line the pair up with the tires before loading.
- Use the pre-drilled holes and the screws or bolts the maker supplies where a fixed mount is wanted.
- Rinse mud from the punched holes so the surface keeps its grip.
- Move the pair by the built-in handles on the VNN, Lonsge and VEVOR ramps.
- Check the claw plates on the VEVOR pair before each load so they sit firm on the step.
FAQs from goat keepers
What capacity metal tractor ramp do I need?
Capacities here run from 1200 lb total on the VEVOR pair to 1600 lb on the CUIOFREE pair. Match the rating to the machine you load and stay within the rated capacity the maker lists.
How long should a tractor ramp be?
Lengths here run from 29 in on the VNN and CUIOFREE pairs to 39 in on the VEVOR pair. Longer ramps give a gentler slope, and the VNN and Lonsge state a 12.7-degree tilt.
Are metal tractor ramps slippery in the rain?
The ramps here use punched plates, perforations or anti-slip strips for grip, and the punched holes drain water. The Lonsge adds integrated anti-slip strips over its punch plate surface.
Do these ramps need mounting?
The VNN needs 3 screws, the Lonsge uses included bolts in pre-drilled holes, and the CUIOFREE has pre-drilled holes for permanent mounting. The VEVOR pair can also sit in place with its claw plates on the step.
Which ramp here holds the most weight?
The CUIOFREE pair at 1600 lb. The VNN, Lonsge and TraiNexalign pairs each rate 1500 lb, and the VEVOR pair rates 1200 lb total.
What size are these ramps?
Pairs here measure 29 by 48 in, 33 by 48 in, 36 by 48 in, and 39 by 9 in. Measure the doorway and the tire width before ordering.
Behind the Farm Score
The GoatGear Score weighs performance (rated capacity and size), build, value, safety and warranty. For ramps, safety means a stated anti-slip surface, grip features and mounting that holds the ramp in place. None of the five state a warranty term. How we pick explains the weights.
| Product | GoatGear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| CUIOFREE 29×48 Shed Ramp | 9.7 | 33 | 21 | 21 | 8 | 0 |
| Lonsge 33×48 Shed Ramp | 9.7 | 30 | 21 | 21 | 9 | 0 |
| VNN 29×48 Shed Ramp | 9.6 | 30 | 22 | 20 | 8 | 0 |
| TraiNexalign 36×48 Shed Ramp | 9.6 | 29 | 20 | 20 | 7 | 0 |
| VEVOR 39×9 Trailer Ramp | 9.5 | 26 | 20 | 21 | 8 | 0 |
Points become a score between 9.2 and 9.8 by simple proportion, which means a higher point count always reads higher.
More from the barn
See every tractor attachment guide and all tractor implement guides. Also see our best livestock loading ramp for trailers. Also see our best livestock loading ramp for pickup trucks. Also see our best extra long livestock loading ramp. Also see our aluminum vs steel livestock loading ramp. Also see our wood vs aluminum livestock loading ramp. Also see our livestock loading ramp vs loading chute. Also see our best livestock loading ramp for small farms. Also see our best quick hitch for tractor.
More picks: browse tractor implements, tractor attachments and farm water.
