Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Wood vs Aluminum Livestock Loading Ramp: Which One Should You Buy?

A guide to wood vs aluminum livestock loading ramps: weight, corrosion, strength and cost, with four ramp kits and ramps for the farm.

Wood vs Aluminum Livestock Loading Ramp: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Goovilla Fence Post Repair KitGoovilla Fence Post Repair Kit9.6/10View on Amazon
  2. 2Loading Ramps for Pickup TrucksLoading Ramps for Pickup TrucksView on Amazon
  3. 376''L × 53''W Tri-Fold Aluminum Loading Ramp for Pickup76''L × 53''W Tri-Fold Aluminum Loading Ramp for PickupView on Amazon
  4. 4Loading RampsLoading RampsView on Amazon

For a livestock loading ramp, aluminum wins on weight and weather resistance while wood wins on cost and easy repair. This guide answers wood vs aluminum livestock loading ramp by weight, corrosion, strength and cost, so you can pick the right material for your trailer and your animals. Every number below comes from an Amazon listing for ramp gear we compared, and we point out where those listings contradict themselves.

Also worth comparing

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Wood vs aluminum livestock loading ramp: the short answer

Pick aluminum when you move the ramp often or load in rain, since aluminum resists rust and weighs less. Pick wood when the ramp stays in one place and you want the lowest cost, since a 2 x 8 board is cheap to replace. A hybrid, aluminum ramp ends on wood boards, splits the difference: the boards carry the load and the aluminum ends grip the trailer. The four gear picks below cover both approaches.

Wood and aluminum ramps compared

Weight and portability

Aluminum ramps are lighter than wood ramps of the same length, which matters when one person sets up alone. The Arejonner folding ramps weigh 17 lbs each and fold for storage. Wood ramps built on 2 x 8 boards are heavier but the boards are easy to source anywhere.

Corrosion and weather

Aluminum resists rust and corrosion, as the MaxxHaul 50946 listing states, so it suits outdoor storage and wet loading days. Wood rots unless treated, and treated wood adds weight. Steel ramp ends, like the MAXXHAUL 50872, rely on a powder-coated finish for protection.

Material Weight Weather Repair
Aluminum Light Rust resistant Harder to fix
Wood Heavy Rots untreated Board swaps easy
Steel ends Heavy Coating dependent Bolts replaceable

Strength and capacity

Listed capacities here run from 700 lbs per ramp on the MAXXHAUL 50872 steel kit to 750 lbs per ramp on the AFA Tooling kit and the Arejonner folding ramps, with the Arejonner pair rated 1500 lbs combined. Match the capacity to the heaviest animal plus handler, not just the animal alone.

The gear: four ramp kits and ramps

The Arejonner 72.5-inch folding ramps lead the gear section with a 1500 lb combined capacity, 750 lbs per ramp, at 17 lbs each. The dense perforated surface adds traction in any weather, and the box includes four safety straps and gloves. These are the pick when the ramp travels with the trailer.

The AFA Tooling 2×8 ramp kit turns standard 2 x 8 boards into a ramp with machined aluminum ends, grip lines and rubber grooved anti-slip feet. The kit holds 750 lbs per ramp for a 1500 lb total. The kit is made to fit 2 x 8 oak hardwood at 1.37 inches actual thickness; the listing warns softwood may need shaving to fit. This is the pick when you want wood boards with aluminum ends.

The MAXXHAUL 50872 steel ramp top kit converts 2 x 8 planks into ramps with powder-coated steel ends. Each ramp supports up to 700 lbs of distributed weight. The kit includes 2 steel ends, 4 bolts, 4 nuts, 4 safety pins and 2 protective pads for the tailgate. This is the pick when you want steel ends and a complete hardware kit.

The MaxxHaul 50946 aluminum ramp top kit fits 2 x 8 boards with aluminum construction for rust and corrosion resistance. It adds protective pads for the tailgate and a non-skid surface, with a universal fit. This is the pick when the ramp lives outdoors in wet weather.

Read the listing twice

Ramp listings often contradict themselves. The AFA Tooling listing gives a 1500 lb capacity in the title and 750 lbs per ramp in the bullets, which only match if the kit has two ramps. The MAXXHAUL 50872 listing states 700 lbs per ramp while its steel build suggests more. Check whether a capacity is per ramp or per pair before you buy.

What this guide does not cover

This guide covers ramp materials and the four gear picks above, not trailer selection, loading technique or animal handling. It does not cover how much weight a trailer can tow or any health question. Ask your veterinarian or local extension office about animal handling and transport.

FAQs from goat keepers

Which is better for a livestock ramp, wood or aluminum?

Aluminum is lighter and rust resistant; wood is cheaper and easier to repair. Aluminum ramp ends on wood boards split the difference.

What capacity do I need for goats?

Match the capacity to the heaviest animal plus handler. The picks here run 700 to 750 lbs per ramp.

Do ramp kits include the wood boards?

No. The AFA Tooling, MAXXHAUL 50872 and MaxxHaul 50946 kits are ramp ends only; you supply the 2 x 8 boards.

Are these ramps good for trailers?

The listings state use for pickups, trailers, ATVs and more. See our livestock loading ramp for trailers guide for trailer-specific picks.

Do any of these state a warranty?

None of the four states a warranty term.

More from the barn

See every goat fencing guide and all fencing and shelter guides. Also see our best livestock loading ramp for pigs. Also see our best livestock loading ramp for trailers.

More picks: electric fence chargers, fence post drivers, electric fence insulators, goat shelters.