
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallGavinjitao Grease Gun Holder9.6/10View on Amazon - 2
Best for Small ShopsHuthbrother Grease Gun Holder9.6/10View on Amazon - 3
Best Locking HolderLubriMatic 70-901 Holder9.5/10View on Amazon - 4
Best for Rough ShopsLockNLube Grease Gun Holder9.5/10View on Amazon - 5
Best Hose SlotsWHMYZHL Grease Gun Holder9.5/10View on Amazon
After morning milking, when the grease gun slides off the bench and the hose drips across the floor, the best wall mount grease gun holder is the rack that keeps the gun, hose and spare cartridge up on the wall and ready for the tractor. We compared wall mount grease gun holders by guns held, drip cups, hose slots, mounting hardware, size and stated warranty, using only what each listing publishes. The racks below run from a wide rack with cups for every drip to a small locking rack for the gun by the bench.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall Gavinjitao Grease Gun Holder: 2 guns, 2 cartridges, 5 drip cups and a hose groove Check price on Amazon
Best for Small Shops Huthbrother Grease Gun Holder: 1 gun, 2 drip cups, 3 hooks and no assembly Check price on Amazon
Best Locking Holder LubriMatic 70-901 Holder: Center latch locks the gun; 90 day warranty stated Check price on Amazon
Best for Rough Shops LockNLube Grease Gun Holder: Spring hold for hand and cordless guns, 4 bolt holes Check price on Amazon
Best Hose Slots WHMYZHL Grease Gun Holder: 3 hose slots, 2 drip cups and a spring support Check price on Amazon
The gear we picked
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | Gavinjitao Grease Gun Holder | 9.6/10 | Buy on Amazon |
| 2 | Huthbrother Grease Gun Holder | 9.6/10 | Buy on Amazon |
| 3 | LubriMatic 70-901 Holder | 9.5/10 | Buy on Amazon |
| 4 | LockNLube Grease Gun Holder | 9.5/10 | Buy on Amazon |
| 5 | WHMYZHL Grease Gun Holder | 9.5/10 | Buy on Amazon |

Gavinjitao Grease Gun Holder
A wall mount rack that holds 2 grease guns and 2 spare cartridges, with 5 stainless steel drip cups and a hose groove.
Pros
- Holds 2 grease guns and 2 spare cartridges at once
- 5 stainless steel drip cups catch drips from the guns and hoses
- Hose groove plus 6 small holes for screwdrivers and small tools
- Pre-drilled holes and installation hardware included
Cons
- No warranty term is stated
- Weighs 4.41 pounds, the heaviest holder here
- 16.9 inches wide, so it needs a long clear stretch of wall
- Holds 2 guns, more than a one-gun shop needs

Huthbrother Grease Gun Holder
A wall mount rack that holds 1 grease gun and a spare cartridge, with 2 stainless steel drip cups and 3 hooks.
Pros
- Holds 1 grease gun and a spare cartridge
- 2 stainless steel drip cups catch drips from the hose
- 3 hooks hold small shop tools within reach
- No assembly, with pre-drilled holes and hardware included
Cons
- Holds only 1 grease gun
- No dimensions are stated, so fit is hard to judge before ordering
- No warranty term is stated
- The spare cartridge holder fits 1 cartridge only

LubriMatic 70-901 Holder
A small wall mount holder with a center latch that locks the gun in place, in a corrosion-resistant finish.
Pros
- Center latch locks the gun in the holder
- Corrosion-resistant finish stated
- 90 day limited warranty is stated
- Weighs 0.3 pounds, the lowest weight here
Cons
- Mounting screws are not included
- No drip cup is stated, so drips have nowhere to land but the floor
- Holds 1 gun only, with no spare cartridge storage stated
- Small 5.0 by 2.0 by 5.0 inch frame leaves no room for hose storage

LockNLube Grease Gun Holder
A heavy duty holder with a spring that grips the gun, made for hand-operated and cordless grease guns in rough conditions.
Pros
- Heavy duty spring holds the gun in high-vibration conditions
- Fits hand-operated and cordless grease guns
- Four large-diameter bolt holes make mounting easy
- 8.5 by 2.0 by 12.0 inches, a tall narrow rack for a tight wall
Cons
- No drip cup is stated
- No mounting hardware is mentioned
- No spare cartridge storage is stated
- 12.0 inches tall, so it needs vertical wall space

WHMYZHL Grease Gun Holder
A wall mount rack that holds 1 grease gun, with 2 stainless steel drip cups, 3 hose slots and a spring support.
Pros
- 3 hose slots of different sizes and shapes
- 2 stainless steel cups catch drips from the hose
- Heavy-duty all-steel build with a corrosion-resistant finish
- Pre-drilled holes and hardware included
Cons
- No dimensions are stated, so fit is hard to judge before ordering
- Holds only 1 grease gun
- No spare cartridge holder is stated
- Cordless grease guns are not named as fitting
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
Pit Posse 572 Hand Grease Gun Holder RackMade in USA aluminum rack with a grease catch cup and predrilled mounting holes.Check on Amazon
TTXSCZYH Holder for Milwaukee M18, Red 2-PackRed 2-piece holder for the Milwaukee M18 2646-20, with screws and anchors included.Check on Amazon
TTXSCZYH Holder for Milwaukee M18, BlackBlack single holder for the Milwaukee M18 2646-20, with screws and anchors included.Check on Amazon
WHMYZHL Heavy Duty Grease Gun HolderFour-bolt design for manual and wireless grease guns in high vibration settings.Check on Amazon- UNITEDPOWER Grease Gun HolderWall mount rack with removable drip cups and a spare cartridge holder for workshop, shop and garage.Check on Amazon
Spec comparison
| Holder | GoatGear Score | Guns Held | Drip Cups | Size | Warranty | Amazon |
|---|---|---|---|---|---|---|
| Gavinjitao Grease Gun Holder | 9.6/10 | 2 | 5 | 16.9 x 2.6 x 6.77 in | Not stated | View on Amazon |
| Huthbrother Grease Gun Holder | 9.6/10 | 1 | 2 | Compact | Not stated | View on Amazon |
| LubriMatic 70-901 Holder | 9.5/10 | 1 | Not stated | 5.0 x 2.0 x 5.0 in | 90 day limited | View on Amazon |
| LockNLube Grease Gun Holder | 9.5/10 | 1 | Not stated | 8.5 x 2.0 x 12.0 in | Not stated | View on Amazon |
| WHMYZHL Grease Gun Holder | 9.5/10 | 1 | 2 | Single unit | Not stated | View on Amazon |
Figures come from the product pages and reflect what the maker rates, current as of 21 November 2026.
How to choose the best wall mount grease gun holder
How many guns and cartridges
The Gavinjitao rack holds 2 grease guns and 2 spare cartridges, while the other four racks hold 1 gun each. A shop that runs two guns can keep both on the Gavinjitao rack, and a shop with one gun can take a smaller rack and keep more wall free. Match the rack to a grease gun kit for tractors so the gun, hose and cartridges live in one spot.
Drip cups and hose slots
Three of the five racks catch drips: the Gavinjitao rack with 5 stainless steel cups, and the Huthbrother and WHMYZHL racks with 2 cups each. The LubriMatic and LockNLube racks state no drip cup, so drips from those guns land on the bench or floor. Hose control differs too: the Gavinjitao rack has a hose groove with 6 small holes for tools, the WHMYZHL rack has 3 hose slots of different sizes and shapes, and the Huthbrother rack adds 3 hooks.
| Holder | Guns held | Drip cups | Hose storage |
|---|---|---|---|
| Gavinjitao | 2 | 5 | Groove |
| Huthbrother | 1 | 2 | 3 hooks |
| WHMYZHL | 1 | 2 | 3 slots |
| LubriMatic 70-901 | 1 | Not stated | Not stated |
| LockNLube | 1 | Not stated | Not stated |
Mounting hardware and wall space
The Huthbrother, Gavinjitao and WHMYZHL racks come with pre-drilled holes and hardware, while the LubriMatic rack mounts with 2 screws that are not included and the LockNLube rack states no hardware. Wall space matters too: the Gavinjitao rack measures 16.9 by 2.6 by 6.77 inches, the LockNLube rack measures 8.5 by 2.0 by 12.0 inches, and the LubriMatic rack measures 5.0 by 2.0 by 5.0 inches. See every tractor attachment guide before you drill, and check the gun against the rack size where the listing states one.
Warranty and finish
Only the LubriMatic 70-901 states a warranty, a 90 day limited warranty, and the other four state no warranty term. Finishes are stated on four of the five: the Huthbrother and Gavinjitao racks use a powder coating, the LubriMatic rack has a corrosion-resistant finish, and the WHMYZHL rack is all-steel with a corrosion-resistant finish. A tractor grease cartridge kept in the rack stays clean and ready, so the next grease job starts without a hunt through the toolbox.
Around the Barn
- Mount the rack on a wall, tool shed or cart near the tractor service spot, using the pre-drilled holes and hardware that come with the Huthbrother, Gavinjitao and WHMYZHL racks.
- Empty the stainless steel drip cups after greasing so old grease does not sit in the cups.
- Slide the hose into the groove or slots so it hangs straight and stays off the floor.
- Keep spare cartridges in the rack so the next grease job starts with a cartridge at hand.
- Check the center latch on the LubriMatic rack when the gun goes back, so it stays locked in place.
FAQs from goat keepers
How many grease guns fit on one wall mount holder?
The Gavinjitao rack holds 2 grease guns and 2 spare cartridges. The Huthbrother, LubriMatic, LockNLube and WHMYZHL racks hold 1 grease gun each.
Which grease gun holders catch drips?
The Gavinjitao rack has 5 stainless steel drip cups, and the Huthbrother and WHMYZHL racks have 2 cups each. The LubriMatic and LockNLube racks state no drip cup.
Which holder here states a warranty?
Only the LubriMatic 70-901 states a warranty, a 90 day limited warranty. The other four racks state no warranty term.
Do these holders come with mounting hardware?
The Huthbrother, Gavinjitao and WHMYZHL racks come with pre-drilled holes and hardware. The LubriMatic rack mounts with 2 screws that are not included, and the LockNLube rack states no hardware.
Which holder fits a cordless grease gun?
The LockNLube holder states it fits hand-operated and cordless grease guns. The other four racks do not name cordless guns.
Behind the Farm Score
The GoatGear Score weighs performance, build, value, safety and warranty. For grease gun holders, safety means a rack that holds the gun in place and cups that keep grease off the floor. Only one of the five states a warranty term, the LubriMatic 70-901 with a 90 day limited warranty. How we pick explains the weights.
| Product | GoatGear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Gavinjitao Grease Gun Holder | 9.6 | 32 | 22 | 21 | 5 | 0 |
| Huthbrother Grease Gun Holder | 9.6 | 30 | 21 | 21 | 5 | 0 |
| LubriMatic 70-901 Holder | 9.5 | 27 | 20 | 19 | 5 | 2 |
| LockNLube Grease Gun Holder | 9.5 | 27 | 20 | 19 | 6 | 0 |
| WHMYZHL Grease Gun Holder | 9.5 | 27 | 20 | 19 | 5 | 0 |
Points become a score between 9.2 and 9.8 by simple proportion, which means a higher point count always reads higher.
More from the barn
See every tractor attachment guide and all tractor implement guides. Also see our best grease gun kit for tractors. Also see our best grease gun under 25. Also see our best tractor grease bucket. Also see our best tractor grease cartridge.
More picks: browse barn and farm tools, tractor implements and pasture tools.
