
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallSchwer CR3027 A79.7/10View on Amazon - 2
Best Lightweight GripDEX FIT FN3309.6/10View on Amazon - 3
Best LeatherGeneric Goatskin Driver9.5/10View on Amazon - 4
Best Bulk PackLOCCEF MicroFoam Nitrile9.5/10View on Amazon - 5
Best Knit CuffCarhartt C-Grip9.4/10View on Amazon
Hay sticks to sleeves, stems work into cuffs, and a bale twine knot can be stubborn with cold fingers, so the best work gloves for hay handling need grip for twine and stems, a cuff that keeps chaff out, and enough feel to work a gate latch without pulling the gloves off. We compared work gloves by coating and material, stated cut rating, pack size, size range, touchscreen use where stated, and warranty term, using only what each maker publishes.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall Schwer CR3027 A7: ANSI A7 cut rating, sandy nitrile grip, 2 pairs Check price on Amazon
Best Lightweight Grip DEX FIT FN330: Foam nitrile coating, EN388 3131A, touchscreen use Check price on Amazon
Best Leather Generic Goatskin Driver: Grain goatskin leather, 3 pairs, pull-on cuff Check price on Amazon
Best Bulk Pack LOCCEF MicroFoam Nitrile: 12 pairs, micro-foam nitrile, EN388 2016 stated Check price on Amazon
Best Knit Cuff Carhartt C-Grip: Knit shell, molded coating, wrap cap fingertips Check price on Amazon
The gear we picked
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | Schwer CR3027 A7 | 9.7/10 | Buy on Amazon |
| 2 | DEX FIT FN330 | 9.6/10 | Buy on Amazon |
| 3 | Generic Goatskin Driver | 9.5/10 | Buy on Amazon |
| 4 | LOCCEF MicroFoam Nitrile | 9.5/10 | Buy on Amazon |
| 5 | Carhartt C-Grip | 9.4/10 | Buy on Amazon |

Schwer CR3027 A7
A 2-pair pack of cut resistant gloves in Medium with a sandy nitrile coating, stated ANSI A7 rating and touchscreen use.
Pros
- ANSI A7 cut rating, the highest stated in this guide
- Sandy nitrile coating described for grip in wet conditions
- Touchscreen use stated for phones and tablets
- 2 pairs in the pack, washable and reusable as stated
Cons
- Only Medium is listed for this pack, so other sizes need a different pack
- Yellow color shows hay dust and barn dirt quickly
- No leather palm for readers who prefer a driver glove feel
- Cut rating focus suits sharper work more than plain hay carrying

DEX FIT FN330
A lightweight 1-pair glove in Large with a water-based foam nitrile coating, stated EN388 3131A and ANSI Cut A1 standards and touchscreen use.
Pros
- Foam nitrile coating described for grip on tools and materials
- CE EN388 3131A and ANSI Cut A1 standards are stated
- Touchscreen use stated for phones, tablets and scanners
- Thin, breathable and machine washable as stated
Cons
- Only 1 pair in the pack, so no spare pair is included
- ANSI Cut A1 is a lower cut level than the A7 pick
- Thin design gives less padding for rough bale edges
- Large is the size listed here, with no size range in this pack

Generic Goatskin Driver
A 3-pair pack of grain goatskin leather driver gloves in X-Large with a keystone thumb, shirred elastic back and pull-on closure.
Pros
- Grain goatskin leather stated at 100% for the glove body
- 3 pairs in the pack for spares at the hay storage
- Keystone thumb and shirred elastic back for fit
- Sizes listed at 9 inches, 10 inches and 11 inches
Cons
- No cut rating is stated for these leather gloves
- No touchscreen feature is stated
- Warranty covers manufacturer defects, not normal wear and tear
- Pull-on cuff has no knit wrist to seal out chaff

LOCCEF MicroFoam Nitrile
A 12-pair bulk pack in size 8/M with a micro-foam nitrile coating, seamless nylon liner with spandex and a knit wrist.
Pros
- 12 pairs in one pack for spares around the barn
- Micro-foam nitrile coating described for grip with light oils
- CE EN388 2016 is stated by the maker
- Knit wrist described as helping keep dirt and debris out
Cons
- No warranty term is stated
- Only size 8/M is listed for this pack
- Ultrathin design gives less padding on rough stems
- No leather option for readers who prefer driver gloves

Carhartt C-Grip
A knit shell glove in Large with a molded C-Grip coating, wrap cap fingertip coverage and a knit cuff for a snug fit.
Pros
- Molded coating described for firm handling in demanding work
- Wrap cap coverage over fingertips and vulnerable areas
- Knit cuff described for snug fit and keeping debris out
- Vibration-dampening design described for power tool use
Cons
- No warranty term is stated
- No cut rating is stated for this glove
- Only 1 pair in the pack, with Large as the listed size
- No touchscreen feature is stated
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
Schwer CR3027 A7 XLSame A7 sandy nitrile glove in X-Large, 2 pairs, for larger hands.Check on Amazon
Spec comparison
| Gloves | GoatGear Score | Pack | Size | Material or coating | Cut rating | Warranty | Amazon |
|---|---|---|---|---|---|---|---|
| Schwer CR3027 A7 | 9.7/10 | 2 pairs | Medium | Sandy nitrile coating | ANSI A7 | Limited lifetime | View on Amazon |
| DEX FIT FN330 | 9.6/10 | 1 pair | Large | Foam nitrile coating | ANSI Cut A1 | 2 Year Manufacturer | View on Amazon |
| Generic Goatskin Driver | 9.5/10 | 3 pairs | X-Large | Grain goatskin leather | Not stated | 60 Days against defects | View on Amazon |
| LOCCEF MicroFoam Nitrile | 9.5/10 | 12 pairs | 8/M | Micro-foam nitrile coating | EN388 2016 | Not stated | View on Amazon |
| Carhartt C-Grip | 9.4/10 | 1 pair | Large | Knit shell, molded coating | Not stated | Not stated | View on Amazon |
These are maker ratings taken from the goat gear listings on 21 November 2026, not our own measurements.
How to choose the best work gloves for hay handling
Coating, leather and grip on hay
Hay work is a mix of lifting bales, pulling flakes apart, carrying hay to a feeder and sweeping loose stems off the barn floor. Coated knit gloves such as the Schwer CR3027 A7 and the DEX FIT FN330 use nitrile coatings that the makers describe for grip on materials and tools, and both state touchscreen use for phones and tablets. The Generic Goatskin Driver takes a different route with grain goatskin leather, a keystone thumb and a pull-on cuff, which suits readers who prefer leather for bale handling over a coated knit. The Carhartt C-Grip uses a knit shell with a molded coating and wrap cap coverage over the fingertips. Match the material to the chore: coated knit for feel and grip, leather for a traditional driver glove fit. Pair the gloves with a feeder that keeps hay off the ground, such as the options in our best hay feeder for goats guide.
Cut rating and what it covers
Only some makers state a cut rating. The Schwer CR3027 A7 is stated at ANSI A7, the highest cut level in this guide, with a sandy nitrile coating described for grip in wet and greasy conditions. The DEX FIT FN330 states CE EN388 3131A and ANSI Cut A1, a lower cut level, with a water-based foam nitrile coating. The LOCCEF MicroFoam Nitrile states CE EN388 2016 with a micro-foam nitrile coating and a knit wrist. The goatskin driver glove and the Carhartt C-Grip state no cut rating, so compare them on material, cuff and fit rather than a cut level. A cut rating is a maker-stated standard, not a promise for every barn task, so choose the level that matches the work you actually do with twine, wire and tools.
| Gloves | Material or coating | Cut rating | Pack |
|---|---|---|---|
| Schwer CR3027 A7 | Sandy nitrile coating | ANSI A7 | 2 pairs |
| DEX FIT FN330 | Foam nitrile coating | ANSI Cut A1 | 1 pair |
| Generic Goatskin Driver | Grain goatskin leather | Not stated | 3 pairs |
| LOCCEF MicroFoam Nitrile | Micro-foam nitrile coating | EN388 2016 | 12 pairs |
| Carhartt C-Grip | Knit shell, molded coating | Not stated | 1 pair |
Pack size, size and cuffs
Pack size changes how you stock the barn. The LOCCEF pack holds 12 pairs in size 8/M, which suits a household that wants spares by the hay storage. The Generic Goatskin Driver holds 3 pairs and lists sizes Medium at 9 inches, Large at 10 inches and X-Large at 11 inches, with a shirred elastic back. The Schwer CR3027 A7 holds 2 pairs in Medium. The DEX FIT FN330 and the Carhartt C-Grip are each 1 pair in Large. Cuffs matter with hay: the LOCCEF knit wrist and the Carhartt knit cuff are both described as helping keep debris out, while the goatskin driver uses a pull-on closure with a shirred elastic back. If you weigh hay for feeding, see our best hanging scale for hay guide, and for carrying flakes to the pen, see the best hay net for square bales.
Warranty terms stated by the maker
Warranty terms vary widely here. The Schwer CR3027 A7 states a limited lifetime warranty. The DEX FIT FN330 states a 2 Year Manufacturer warranty. The Generic Goatskin Driver states 60 Days against manufacturer defects, not normal wear and tear. The LOCCEF MicroFoam Nitrile and the Carhartt C-Grip state no warranty term in the material compared here. Read the term as written: a defects term is not the same as a lifetime term, and neither one replaces checking the size before you order, since a glove that is too loose catches on twine and a glove that is too tight tires the hand during a long feeding round.
Around the Barn
- Keep a spare pair by the hay storage so a wet pair can dry while chores continue.
- Shake loose stems and chaff out of cuffs after feeding, before the gloves go back on the shelf.
- Wash washable coated gloves as the maker directs and let them dry fully before the next round.
- Check fingertips and palms for wear where twine and bale edges rub, and retire a pair with holes.
FAQs from goat keepers
Which gloves here state the highest cut rating?
The Schwer CR3027 A7 states ANSI A7. The DEX FIT FN330 states ANSI Cut A1 and CE EN388 3131A, and the LOCCEF MicroFoam Nitrile states CE EN388 2016.
Are leather gloves a good choice for hay handling?
The Generic Goatskin Driver is made from grain goatskin leather with a keystone thumb and a pull-on cuff. It states no cut rating, so compare it on leather, fit and pack size.
Which pack gives the most spare pairs?
The LOCCEF MicroFoam Nitrile pack holds 12 pairs in size 8/M. The Generic Goatskin Driver holds 3 pairs, and the Schwer CR3027 A7 holds 2 pairs.
Can these gloves be used with a phone?
The Schwer CR3027 A7 and the DEX FIT FN330 both state touchscreen use. The LOCCEF title also states touchscreen use, while the goatskin driver glove and the Carhartt C-Grip state no touchscreen feature.
What sizes are stated for the goatskin gloves?
The maker lists Medium at 9 inches, Large at 10 inches and X-Large at 11 inches. The pack compared here is X-Large with 3 pairs.
Which gloves state a warranty term?
The Schwer CR3027 A7 states a limited lifetime warranty, the DEX FIT FN330 states a 2 Year Manufacturer warranty, and the Generic Goatskin Driver states 60 Days against manufacturer defects.
Behind the Farm Score
The GoatGear Score weighs performance, build, value, safety and warranty. For work gloves, performance covers grip, dexterity and how the stated material suits hay, twine and barn chores, build covers the shell, coating and cuff design, and safety means a stated cut rating or safety standard such as EN388 or an ANSI cut level where the maker gives one. Three of these picks state a warranty term, and the others state no term. How we pick explains the weights.
| Product | GoatGear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Schwer CR3027 A7 | 9.7 | 32 | 21 | 21 | 9 | 4 |
| DEX FIT FN330 | 9.6 | 29 | 20 | 20 | 7 | 3 |
| Generic Goatskin Driver | 9.5 | 28 | 22 | 21 | 0 | 2 |
| LOCCEF MicroFoam Nitrile | 9.5 | 26 | 18 | 22 | 6 | 0 |
| Carhartt C-Grip | 9.4 | 28 | 21 | 19 | 0 | 0 |
A score of 9.2 marks the weakest point total on our scale and 9.8 the strongest; totals in between are placed proportionally.
More from the barn
See every hay handling guide and all barn and farm tools guides.
More picks: browse farm workwear, hay feeders and how to choose a hay feeder for goats.
