
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallHarrison Howard XL Pull-On9.6/10View on Amazon - 2
Best Fleece-LinedShires ARMA Fleece X-Full9.6/10View on Amazon - 3
Best Measured FitAbbylike XL Ballistic Rubber9.5/10View on Amazon - 4
Best for TrainingAbbylike XL Bell Boots9.5/10View on Amazon - 5
Best LightweightShires ARMA Rubber X-Full9.5/10View on Amazon
Morning turnout ends the same way most days: a horse steps out, reaches under itself at the trot, and clips a front heel with a hind hoof before the rider has finished the chores. The best xl bell boots are the ones that sit over that heel and stay put through turnout and training, and this guide compares five pairs in XL and X-Full on rubber thickness, fit, closure and weight, using only what each listing publishes.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall Harrison Howard XL Pull-On: 360 degree coverage with a leather touch tape closure Check price on Amazon
Best Fleece-Lined Shires ARMA Fleece X-Full: 6mm impact-absorbing rubber with a fleece lining Check price on Amazon
Best Measured Fit Abbylike XL Ballistic Rubber: Ankle, base and height all stated for an XL fit Check price on Amazon
Best for Training Abbylike XL Bell Boots: 360 degree protection sized for training and competition Check price on Amazon
Best Lightweight Shires ARMA Rubber X-Full: 6mm rubber at 0.5 pounds, the lowest stated weight Check price on Amazon
The gear we picked
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | Harrison Howard XL Pull-On | 9.6/10 | Buy on Amazon |
| 2 | Shires ARMA Fleece X-Full | 9.6/10 | Buy on Amazon |
| 3 | Abbylike XL Ballistic Rubber | 9.5/10 | Buy on Amazon |
| 4 | Abbylike XL Bell Boots | 9.5/10 | Buy on Amazon |
| 5 | Shires ARMA Rubber X-Full | 9.5/10 | Buy on Amazon |

Harrison Howard XL Pull-On
A 2-pack of extra thick rubber pull-on bell boots in XL with 360 degree coverage and a large leather touch tape.
Pros
- 360 degree coverage of the coronary band and heel bulbs
- Extra thick rubber with a smooth interior
- Large leather touch tape for a firm fit
- Waterproof rubber for turnout in wet conditions
Cons
- XL only in this listing, so smaller hooves need another size
- Black only in this listing
- The 2-boot pack suits one horse, so a second horse needs another pack
- The extra thick rubber adds bulk over thinner boots

Shires ARMA Fleece X-Full
A fleece-lined X-Full boot in 6mm impact-absorbing gum rubber that deflects scuffs and absorbs the shock of overreaching.
Pros
- 6mm impact-absorbing rubber deflects scuffs
- Fleece lining for a soft fit
- Protects the heel bulbs and coronet band
- Thick, flexible shell absorbs the shock of overreaching
Cons
- No warranty term is stated
- X-Full only in this listing, with no smaller size on offer
- 0.7 pounds, heavier than the 0.5 pound Shires rubber boot
- Black only in this listing

Abbylike XL Ballistic Rubber
An XL pair with stated ankle, base and height measurements, in soft rubber with an anti-friction design.
Pros
- Ankle 3.5 inches, base 6 inches and height 4.25 inches stated for fit
- Anti-friction design prevents scratches and friction
- Rubber is soft, reliable and easy to clean
- Suits racing, training and rehabilitation
Cons
- XL only in this listing, with no smaller size on offer
- Black only in this listing
- No fleece lining, unlike the Shires fleece boot
- One pair covers one horse, so a second horse needs another pair

Abbylike XL Bell Boots
An XL pair with stated ankle and height measurements, in soft rubber with 360 degree protection for left and right feet.
Pros
- Ankle 3.39 inches and height 3.9 inches stated for fit
- 360 degree protection for left and right feet
- Rubber is soft, reliable and easy to clean
- Suits competition, training and rehabilitation
Cons
- XL only in this listing, with no smaller size on offer
- At 3.9 inches, the height covers less of the heel than the 4.25 inch boot
- Rubber only, with no fleece lining for softness
- One pair covers one horse, so a second horse needs another pair

Shires ARMA Rubber X-Full
A plain 6mm rubber X-Full boot that deflects scuffs and blows to the hoof area, at 0.5 pounds.
Pros
- 6mm rubber deflects scuffs and blows
- 0.5 pounds, the lowest stated weight among the five picks
- Hoof-area protection against scuffs and blows
- Compact size as listed, 3.15 by 1.97 by 0.39 inches
Cons
- No warranty term is stated
- X-Full only in this listing, with no smaller size on offer
- Black only in this listing
- No fleece lining for softness
As an Amazon Associate I earn from qualifying purchases.
Also worth comparing
Horze All Purpose Bell BootsCheck price on Amazon
Centaur Double Thick Bottom Ribbed Bell Boots Transparent GumCheck price on Amazon
More picks to compare
Harrison Howard XL Wine RedSame XL pull-on boot as the top pick, in Wine Red.Check on Amazon
Harrison Howard XL TurquoiseSame XL pull-on boot as the top pick, in Turquoise.Check on Amazon
Abbylike Fleece XL BlackFleece-lined XL pair with the same 3.39 inch ankle and 3.9 inch height.Check on Amazon
Classic Equine Dyno Turn XLNo-turn overreach boot in XL at 0.35 pounds.Check on Amazon
Tough1 Pull-On XL AmberPull-on gum rubber boot with a 90 day warranty.Check on Amazon
Spec comparison
| Bell Boot | GoatGear Score | Material | Size | Weight | Warranty | Amazon |
|---|---|---|---|---|---|---|
| Harrison Howard XL Pull-On | 9.6/10 | Rubber | XL | Not stated | Not stated | View on Amazon |
| Shires ARMA Fleece X-Full | 9.6/10 | 6mm gum rubber, fleece | X-Full | 0.7 lb | Not stated | View on Amazon |
| Abbylike XL Ballistic Rubber | 9.5/10 | Rubber | XL | Not stated | Not stated | View on Amazon |
| Abbylike XL Bell Boots | 9.5/10 | Rubber | XL | Not stated | Not stated | View on Amazon |
| Shires ARMA Rubber X-Full | 9.5/10 | 6mm rubber | X-Full | 0.5 lb | Not stated | View on Amazon |
These are maker ratings taken from the goat gear listings on 19 November 2026, not our own measurements.
How to choose the best xl bell boots
Measure before you order
Two of the five state ankle measurements, so start there. One Abbylike XL pair lists an ankle diameter of about 3.39 inches and a height of about 3.9 inches, while the second Abbylike XL pair lists an ankle diameter of about 3.5 inches, a base diameter of about 6 inches and a height of about 4.25 inches. The Abbylike listings ask buyers to measure the horse before ordering, and that advice holds for every boot here: match the ankle diameter and the boot height to the horse before ordering.
| Bell boot | Ankle diameter | Height |
|---|---|---|
| Abbylike XL Bell Boots | About 3.39 in | About 3.9 in |
| Abbylike XL Ballistic Rubber | About 3.5 in | About 4.25 in |
| Harrison Howard XL Pull-On | Not stated | Not stated |
| Shires ARMA Rubber X-Full | Not stated | Not stated |
| Shires ARMA Fleece X-Full | Not stated | Not stated |
Rubber thickness and coverage
Both Shires boots state 6mm rubber, and the fleece version adds that the rubber is impact-absorbing. The Harrison Howard pair claims extra thick rubber with fine stripes on the outside for added thickness, and 360 degree coverage that wraps the front hoofs. The Abbylike pairs state 360 degree protection and soft rubber that resists breaking and deforming. When the listings state a thickness, compare it directly; when they do not, weigh the coverage shape instead.
Closure and fit
The Harrison Howard pair is a pull-on boot with a large leather touch tape, and the maker describes the tape design as easy to wear with a firm fit. The other four pairs state no closure type, so fit comes down to the stated size and the measurements above. Check the stated size first, then the closure, then the measurements. See best extra large horse halter guide for sizing help on large horses, and best horse hoof pick under 15 guide for daily hoof care.
Weight and pairs
Stated weights run from 0.5 pounds on the Shires rubber boot to 0.7 pounds on the Shires fleece boot, and the other three state no weight. The Harrison Howard pair comes as a 2-pack, and both Abbylike pairs come as 1 pair of 2 pieces for left and right feet. A 2-pack covers one horse, so count pairs, not packs, when outfitting more than one horse. For turnout gear, see best value horse blanket guide.
Around the Barn
- Measure the ankle before ordering, and match the number to the listing.
- Wipe rubber boots clean after muddy turnout; the Abbylike listings call the rubber easy to clean and maintain.
- Check the leather touch tape on the Harrison Howard pair each time it goes on, so the closure holds.
- Store boots dry between uses, with the pair kept together.
FAQs from goat keepers
What size bell boots do I need?
Measure the ankle and the boot height, then match the numbers to the listing. The Abbylike XL pairs state ankle diameters of about 3.39 inches and about 3.5 inches, with heights of about 3.9 inches and about 4.25 inches, and the listings ask buyers to measure the horse before ordering.
What do bell boots do?
Bell boots wrap the front hoofs and cover the coronary band and heel bulbs, guarding against overreaching and interference. The Shires boots add that 6mm rubber deflects scuffs and blows to the hoof area.
How do you put rubber bell boots on?
The Harrison Howard pair is a pull-on boot with a large leather touch tape, and the maker describes the tape design as easy to wear with a firm fit. The Abbylike pairs are also described as easy to install, with left and right feet in the pair.
How do you put pull-on bell boots on?
Pull-on boots go over the hoof, and the Harrison Howard pair adds a leather touch tape to close the boot once it is on. Check the stated XL size against the horse before ordering.
Behind the Farm Score
The GoatGear Score weighs performance (fit, coverage and closure), build, value, safety and warranty. For bell boots, safety means stated protection of the coronary band and heel bulbs and rubber that deflects scuffs and blows. None of the five state a warranty term. How we pick explains the weights.
| Product | GoatGear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Harrison Howard XL Pull-On | 9.6 | 30 | 21 | 21 | 7 | 0 |
| Shires ARMA Fleece X-Full | 9.6 | 29 | 21 | 20 | 7 | 0 |
| Abbylike XL Ballistic Rubber | 9.5 | 28 | 20 | 21 | 5 | 0 |
| Abbylike XL Bell Boots | 9.5 | 28 | 20 | 20 | 5 | 0 |
| Shires ARMA Rubber X-Full | 9.5 | 27 | 19 | 19 | 5 | 0 |
A score of 9.2 marks the weakest point total on our scale and 9.8 the strongest; totals in between are placed proportionally.
More from the barn
See every blankets and fly gear guide and all horse care guides. Also see best horse hoof pick under 15. Also see best extra large horse halter.
More picks: browse horse grooming, horse tack and stable supplies.
