Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Bucket Hooks vs Pallet Forks: Which One Should You Buy?

Bucket hooks vs pallet forks: one loader grab hook, one bucket truck hook and 2 barn bucket hooks compared on load rating, mounting and materials.

Bucket Hooks vs Pallet Forks: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 13" Bucket Truck Blanket Hooks Rated at 100lbs Working Load3" Bucket Truck Blanket Hooks Rated at 100lbs Working LoadView on Amazon
  2. 2HDYEGY 6pcs 4 Inch Tack HookHDYEGY 6pcs 4 Inch Tack HookView on Amazon
  3. 3VEVOR Pallet ForksVEVOR Pallet ForksView on Amazon
  4. 4Nilight 2000lbs Clamp on Pallet Forks Fits 43'' TractorNilight 2000lbs Clamp on Pallet Forks Fits 43'' TractorView on Amazon
  5. 5YINTATECH 60" 4000 lbs Clamp on Pallet Forks Heavy DutyYINTATECH 60" 4000 lbs Clamp on Pallet Forks Heavy DutyView on Amazon
  6. 6OLIXIS 2000 Lbs Clamp-On Tractor Pallet ForksOLIXIS 2000 Lbs Clamp-On Tractor Pallet ForksView on Amazon

Bucket hooks vs pallet forks comes down to the job: a bucket hook gives a chain a place to pull from on the loader bucket, while pallet forks turn the loader into a forklift for pallets and crates. This guide covers the hook side only, because no pallet forks are in the products compared here. Only one of the hooks below is a loader bucket hook at all, and the rest hang buckets in a truck or a barn.

Also worth comparing

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Bucket hooks vs pallet forks: the short answer

Start with the load. A loader bucket hook holds a chain, so it suits pulling, dragging and tying down a load with chains and ratchet binders. Pallet forks carry a load on tines, so they suit pallets, crates and bales that sit flat. Chain work takes the hook; pallet work takes the forks. The AMBULL grab hook below is the only loader hook in this guide, rated at 7,500 lb working load limit with a break strength up to 15,000 lbs.

If you would rather go straight to the products, see the best tractor bucket hooks with D ring roundup.

The hooks in this guide

The hooks below run from the loader bucket to the barn, in order of stated load rating.

Hook Type Load rating Mounting
AMBULL grab hook Loader bucket grab hook 7,500 lb WLL; 15,000 lb break strength Bolt-on, backer plate
LINE WORK blanket hook Bucket truck blanket hook 100 lb per hook Hangs inside the bucket
Montarn stall hook Horse stall bucket hook Not stated Wall screws
HDYEGY tack hook Horse tack hook Not stated Over the rail, no screws

AMBULL grab hook: the loader hook

The AMBULL is the only loader bucket hook here, and its numbers show it. It is a Grade 70 grab hook in 3/8 in, made from heavy duty drop forged steel that is galvanized and power coated. The maker rates it at 7,500 lb working load limit, with a break strength up to 15,000 lbs. It bolts on with a backer plate, using 1/2 in by 2-1/5 in Grade 10.9 bolts and a lock nut, and the hook is welded on a 1/4 in thick steel plate measuring 3.25 in by 4.25 in. It works with chains and ratchet binders, and it comes as a 2 pack.

LINE WORK blanket hook: the bucket truck hook

The LINE WORK hook is not a loader hook at all: it is a 3 in hook for a bucket truck, used to hang tools and hold a bucket liner in place. It is made from durable polymer plastic, and the maker rates it at a total working load limit of 100 lbs per hook. The tapered end suits rubber blankets, and the design is made not to damage or tear blanket eyelets. It is for interior placement only, and the maker says to remove it before transport and to follow the load ratings for the elevated work platform.

Montarn stall hook: the barn hook

The Montarn hook hangs water and feed buckets in the barn, stable and fence, and it mounts on a wall with screws. Its ring design holds the hook in place with a safety lock ring, which the maker says keeps a horse from catching a lip or halter and keeps buckets from tipping over or popping off. It is made from high-strength steel with precision welding at the joints, It also serves as a gate holder, stall latch and tie-down point. It comes as a 2-pack with screws included.

HDYEGY tack hook: the over-rail hook

The HDYEGY hook hangs bridles and buckets over a rail in the stable, fence or garage, and it needs no screws and no drilling. It is made from mild steel with an anti-rust coating, and the maker says it is not easy to bend or deform. It measures 5.1 by 4 by 1.6 inches, and it comes as a 6 pack. It stores reins, buckets and accessories to keep the stable tidy.

Working load limits: read the rating

A load rating is the number that decides whether a hook holds the job. The AMBULL lists a working load limit of 7,500 lb and a break strength up to 15,000 lbs, so the working limit is the figure to plan around, not the break strength. The LINE WORK hook lists a total working load limit of 100 lbs per hook. The Montarn and HDYEGY hooks state no load rating at all, so their limits are unknown and they suit hanging buckets, not pulling loads.

A break strength is the load at which the hook fails, and a working load limit is the load the maker rates for use. The AMBULL gives a working load limit and a break strength, which is why it is the only hook here rated for chaining a load to a loader bucket.

Mounting: bolt-on, wall screws or over the rail

Mounting decides where the hook can go. The AMBULL bolts on with a backer plate, using 1/2 in by 2-1/5 in Grade 10.9 bolts and a lock nut, and the hook is welded on a 1/4 in thick steel plate measuring 3.25 in by 4.25 in. The Montarn mounts with its own pair of screws on a beam or wall stud. The HDYEGY needs no screws and no drilling, and hangs over a rail. The LINE WORK hook hangs inside the bucket and must come out before transport.

Materials: forged steel, polymer or mild steel

Material sets how long a hook lasts outdoors. The AMBULL is drop forged steel, galvanized and power coated, which the maker describes as rust and corrosion resistant. The LINE WORK hook is durable polymer plastic, described as durable through any weather condition. The Montarn is high-strength steel with precision welding at the joints. The HDYEGY is mild steel with an anti-rust coating. Forged and galvanized steel suits the loader bucket, polymer suits the bucket truck, and mild steel suits the tack room.

What this guide does not cover

This guide covers hook hardware only. It does not cover pallet forks in depth, because no pallet forks are in the products compared here, and it does not cover loader ratings or how to rig a load. Check the loader manual and the chain maker for ratings before lifting or pulling with a bucket hook.

FAQs from goat keepers

What is a bucket hook for a tractor loader?

A loader bucket hook is a bolt-on grab hook that gives a chain a place to pull from on the bucket. The AMBULL hook is Grade 70 forged steel, rated at 7,500 lb working load limit, and bolts on with a backer plate for use with chains and ratchet binders.

Are bucket hooks and pallet forks the same thing?

No. A bucket hook holds a chain for pulling or tying down a load, while pallet forks carry a load on tines for moving pallets and crates. This guide compares hooks only, because no pallet forks are in the products compared here.

How much weight can a bucket hook hold?

It depends on the hook. The AMBULL is rated at 7,500 lb working load limit with a break strength up to 15,000 lbs, and the LINE WORK hook is rated at 100 lbs per hook. The Montarn and HDYEGY hooks state no load rating.

Can a horse stall bucket hook hold a chain on a loader?

No. The Montarn stall hook and the HDYEGY tack hook hang feed and water buckets in the barn, and neither states a load rating. Only the AMBULL hook is made to bolt on a loader bucket and hold a chain.

What size is a tractor bucket grab hook?

The AMBULL grab hook is 3/8 in, welded on a 1/4 in steel plate measuring 3.25 in by 4.25 in, and mounts with 1/2 in by 2-1/5 in Grade 10.9 bolts. It comes as a 2 pack.

More from the barn

See every tractor attachments guide and all tractor and farm implements guides.

More picks: clamp-on forks for tractors, tractor bucket hooks with D ring, quick attach for tractor buckets and farm tool boxes.