Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Cattle Feed Bunk Dimensions: Size Guide

Cattle feed bunk dimensions from stated listings: 5-foot and 10-foot bunks, 55-inch troughs and hook-over buckets, sized by length, width, depth and capacity.

Cattle Feed Bunk Dimensions: Size Guide
On this page

At feeding time cattle crowd the bunk, and cattle feed bunk dimensions decide whether every animal reaches the rail or pushes grain onto the ground. This guide covers cattle feed bunk dimensions from the listings themselves: the lengths, widths, depths and capacities the makers state, so the bunk fits the pen before it arrives.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Cattle feed bunk dimensions: the short answer

Bunk feeders in the listings run from 5 feet long to 10 feet long. The Rubbermaid Commercial Products BRUTE Bunk Feeder (on Amazon) lists 59.98 x 31.49 x 17.0 inches and a 10-Year Warranty, while the Tarter 1PEB10 lists a 10 ft length and galvanized steel. Freestanding troughs run shorter: the NAOEDEAH trough (on Amazon) lists 55 inches and 22 gallons, and the NenoBeo trough (on Amazon) with stand lists 39.38 x 13.0 x 6.7 inches and 35L (9.25 Gallon) capacity. Hook-over buckets are smaller still, at 15 quarts and 17 quarts. Measure the pen, then match the bunk length to the rail space the herd needs.

Bunk feeder sizes compared

Listing Length Width Depth Capacity
Rubbermaid BRUTE Bunk Feeder 59.98 inches 31.49 inches 17.0 inches Not stated
Tarter 1PEB10 Economy Bunk Feeder 10 ft Not stated Not stated Not stated
NAOEDEAH Goat Feeder Trough 55 inches Not stated Not stated 22 gallons
NenoBeo Livestock Feed Trough with Stand 39.38 inches 13.0 inches 6.7 inches 35L (9.25 Gallon)
Generic Steel Trough, 39.4 inch 39.4 inches 11.8 inches 7.1 inches Not stated
Generic Steel Trough, 59.1 inch 59.1 inches 11.8 inches 7.1 inches Not stated
Sullivan Supply SMART Hi-Back Feeder 28.0 inches 18.0 inches 15.0 inches Not stated

Full-length bunk feeders

The Rubbermaid BRUTE Bunk Feeder is the clearest bunk listing in the set: 59.98 x 31.49 x 17.0 inches, a 5-Feet length in the title, three pluggable drains, multifunctional slots that work as carrying handles or stake slots for anchoring, and a 10-Year Warranty. The maker lists RigidCell construction. The Tarter 1PEB10 10 ft Economy Bunk Feeder lists a 10 ft length and galvanized steel, and nothing else: no width, no depth, no capacity and no warranty term. The listing leaves the rest of the size unstated, so measure the rail and the pen before ordering.

Freestanding troughs

Freestanding troughs sit on the ground or on a stand with no rail to hang from. The NAOEDEAH trough lists 55 inches, 22 gallons, a 1 mm plate, a triangular shape and a split design with screws and nuts included, and says it can feed up to 12 sheep at the same time. The NenoBeo trough with stand lists 39.38 x 13.0 x 6.7 inches, 35L (9.25 Gallon) capacity, a PP feed bin on a hot-dip galvanized steel frame, pre-drilled mounting holes and rounded corners. Steel trough listings give 39.4 x 11.8 x 7.1 inches and 59.1 x 11.8 x 7.1 inches, stainless steel construction, smooth rounded edges and seamless construction with smooth inner walls.

Hook-over buckets

Hook-over buckets hang on a fence rail or stall door and suit a single animal or a measured ration. The Marsui set lists 4 buckets of 15 quarts each, 16.93 x 15.35 x 13.39 inches, polyethylene resin and a built-in back hook, with optional screw holes for a more fixed setup. The Maxdot set lists 2 rubber feeders of 17 quarts each, a mouth opening of 15.8 x 9.5 inches and a height of 8.7 inches, with hooks on the back for fence attachment. The Sullivan Supply SMART Hi-Back Feeder (on Amazon) lists 28.0 x 18.0 x 15.0 inches, 8.55 pounds, no sharp edges and easy cleaning. Each bucket holds a single ration, so a herd needs a bucket per animal.

Reading capacity against your herd

Capacity on these listings is given in gallons for troughs and quarts for buckets, and makers measure it differently. The NAOEDEAH trough lists 22 gallons, the NenoBeo trough lists 35L (9.25 Gallon), the Marsui buckets (on Amazon) list 15 quarts and the Maxdot buckets list 17 quarts. None of these listings converts gallons or quarts into a weight of feed. The NAOEDEAH listing says its trough can feed up to 12 sheep at the same time, which is the only head-count figure in the set. Count the animals that eat at the same time, then pick a bunk length that leaves room at the rail for every head in the group. The water trough sizes guide covers gallons and dimensions for troughs.

Mounting and where the bunk goes

Mounting decides how stable the feeder is and how easy it is to fill. Hook-over buckets hang on a stall door, fence rail, board or pasture panel, and the Marsui buckets add optional screw holes for a more fixed setup. The NenoBeo trough stands on a galvanized steel frame with pre-drilled mounting holes for ground anchoring. The Rubbermaid bunk uses multifunctional slots as carrying handles or stake slots for anchoring. Freestanding troughs need level ground and enough room for cattle to reach from every side. Place the bunk by the gate or barn door where it is easy to refill, and keep it away from water buckets so dropped feed stays dry. For the shape question, see the round vs rectangular feed trough comparison.

Materials: steel, galvanized steel, plastic or rubber

Material sets how long a feeder lasts outdoors. The listings in this set use these materials:

  • Galvanized steel: the Tarter 1PEB10 bunk feeder and the NAOEDEAH trough, which lists a thickened galvanized sheet with a spray coating.
  • Stainless steel: the steel trough listings, with smooth rounded edges and seamless construction.
  • Polyethylene resin: the Marsui hook-over buckets, described as easy to rinse, with rounded edges and a molded shape.
  • Rubber: the Maxdot hook-over feeders, described as soft yet robust, springing back to shape without deforming.

Steel troughs hold up to chewing and pushing better than plastic or rubber. The NenoBeo trough pairs a PP feed bin with a hot-dip galvanized steel frame, which mixes plastic and steel in a single feeder. For a closer look at how the metals compare, see galvanized vs stainless feed trough.

Drains and cleaning

A bunk that holds water after rain or washing needs a way to empty. The Rubbermaid BRUTE Bunk Feeder lists three pluggable drains and says the bunk can serve as a water trough. The NAOEDEAH trough says it is easy to clean and can be washed with water. The Marsui buckets are easy to rinse after grain, water or supplements. The Sullivan feeder lists easy cleaning and no sharp edges. None of the other listings states a drain, so check the listing for a drain plug before ordering a bunk that will sit outdoors. The galvanized stock tank drain plug size guide covers what fits a tank drain.

Read the listing twice

Bunk feeder listings often contradict themselves, and the numbers that conflict are usually the ones needed to plan the install:

  • NAOEDEAH: the bullets list a weight of 24.5 lb, while the spec table lists 26.59 pounds. Trust the title and bullets over the spec table, and allow for the larger figure.
  • NAOEDEAH: the spec table lists 55.0 inches for length, width and depth alike, while the bullets and title call it a 55 inch trough. A trough cannot be as deep as it is long, so read the 55 inch figure as the length only.
  • Maxdot: the bullets give a mouth opening of 15.8 x 9.5 inches and a height of 8.7 inches, while the spec table gives 16.14 x 11.81 x 9.06 inches. The bullets and the spec table describe the same feeder, so measure the fence rail against the larger figures.
  • OBT: the listing is a 1/64 scale model of a 20 ft section, measuring 3.75in L x .75in W x 1.25in H, and marked for ages 14 and up. It is a display model, not a feeder for live cattle.

Some listings also repeat the same bullets across sizes: the steel trough listings share the same description for the 39.4 x 11.8 x 7.1 inch size and the 59.1 x 11.8 x 7.1 inch size, so check the size field, not the bullets, when ordering.

What this guide does not cover

This guide covers feeder hardware only. It does not cover how much feed cattle need, feed types or any health question. Ask a veterinarian or local extension office about rations and cattle health.

FAQs from goat keepers

How long should a cattle feed bunk be?

Listings in this set run from 5 feet to 10 feet long. The Rubbermaid BRUTE Bunk Feeder lists 59.98 inches, the Tarter 1PEB10 lists 10 ft, the NAOEDEAH trough lists 55 inches and the longer steel trough lists 59.1 inches. Match the length to the rail space in the pen.

How deep should a cattle feed bunk be?

Depths in the listings run from 6.7 inches on the NenoBeo trough to 17.0 inches on the Rubbermaid bunk. The steel troughs list 7.1 inches deep, the Sullivan feeder lists 15.0 inches deep and the Maxdot bucket lists a height of 8.7 inches.

How much feed does a bunk feeder hold?

The NAOEDEAH trough lists 22 gallons and the NenoBeo trough lists 35L (9.25 Gallon). Hook-over buckets hold less: the Marsui buckets list 15 quarts and the Maxdot buckets list 17 quarts. None of these listings converts gallons or quarts into a weight of feed.

Do bunk feeders have drains?

Only the Rubbermaid listing in this set states drains: three pluggable drains. None of the other listings states a drain, so check the listing for a drain plug before ordering.

More from the barn

See every feed pan guide and all feeding and water guides.

More picks: feed troughs for calves, feed troughs for lambs, water trough sizes and feed pans for goats.