
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
SCENIC ROAD Wall Hay Rack 25 x 36 x 12 in9.5/10View on Amazon - 2
SCENIC ROAD Wall Hay Rack 25 x 27 x 10 in9.5/10View on Amazon - 3
BUYYAH 40 Inch Wall Mount Hay Feeder9.6/10View on Amazon - 4
UNCOJOY Goat Hay FeederView on Amazon - 5
ICITYWALL Corner Hay RackView on Amazon - 6
EASY-UP Slow Feed Corner Floor Hay Rack for HorsesView on Amazon - 7
Ware Manufacturing Hay RackView on Amazon - 8
2Pcs Hay Feeder Goat 22 Gallon Hay RackView on Amazon
Hay ends up underfoot when the rack does not fit the pen. Goats pull at the bars, drop flakes on the bedding and then stand in the corner waiting for more. A corner hay rack vs round hay rack choice comes down to where the rack sits: a corner rack tucks into the angle of the walls and leaves the middle of the pen clear, while a round rack stands in the open and lets goats feed from every side. This guide compares the 2 styles and the 4 corner racks in the listings below, using only the numbers the makers state.
Also worth comparing
UNCOJOY Goat Hay FeederCheck price on Amazon
ICITYWALL Corner Hay RackCheck price on Amazon
EASY-UP Slow Feed Corner Floor Hay Rack for HorsesCheck price on Amazon
Ware Manufacturing Hay RackCheck price on Amazon
SCENIC ROAD Wall Hay RackCheck price on Amazon
2Pcs Hay Feeder Goat 22 Gallon Hay RackCheck price on Amazon
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Corner hay rack vs round hay rack: the short answer
Pick a corner rack when the pen has a solid corner or a wall to mount on, and pick a round rack when the pen is open ground with no wall at all. The 4 listings in this guide are all corner racks, so the round side is covered here by shape and placement. Corner racks use the angle of the pen and keep hay off the floor, while round racks stand in the open for feeding from every side. Then compare capacity, material and hardware, and read the listing twice for conflicting numbers.
If the choice is already made and the shortlist is what matters, the best hay feeder for goats roundup scores 5 feeders on the same points.
The 4 racks in this guide
The 4 racks below are ranked from the strongest listing to the narrowest: the Topyznsup 2-pack first for its 25-gallon capacity, then the ICITYWALL for size and galvanized steel, then the SGOLAN for gap spacing and hardware, then the Yaocom set for its nets.
| Rack | Style | Stated size | Stated capacity | Material |
|---|---|---|---|---|
| Topyznsup 2-pack | Corner, wall mount | 40 inches | 25 gallons | Carbon steel |
| ICITYWALL corner rack | Corner, wall mount | 29.5 x 13.8 x 26.7 inches | Not stated | Galvanized steel |
| SGOLAN corner rack | Corner, wall mount | 23.3 x 13.2 x 21.7 inches | Not stated | Carbon steel |
| Yaocom 4-set | Corner frames with nets | 18.03 x 12.99 inches | Not stated | Metal frame, nylon netting |
Topyznsup 2-pack
The Topyznsup listing states a 40-inch hay feeder with a 25-gallon capacity, sold as a 2-pack with a wall-mounted design. The maker lists heavy-duty carbon steel with a rust-resistant coating and BPA-free materials, and a corner-friendly, multi-sided frame that lets multiple animals feed at once. It works indoors and outdoors, and the listing includes the tools for installation.
ICITYWALL corner rack
The ICITYWALL listing states a 29.5 x 13.8 x 26.7 inch corner rack in galvanized steel with a black coating, described as rust resistant and durable. The listing states rounded edges that prevent injuries to livestock and a corner design that saves space. The bullets give the top as 29.5 inches wide by 20.8 inches deep, which conflicts with the 13.8 inch depth in the title, so measure the corner against the larger depth before ordering.
SGOLAN corner rack
The SGOLAN listing states a 23.3 x 13.2 x 21.7 inch rack in heavy-duty, rust-resistant carbon steel, with a gap spacing of 3.5 to 4.7 inches that limits waste, per the maker. The listing includes all wall-mount hardware for setup with the included screws. The spec table gives 23.62 x 3.94 x 21.65 inches, which conflicts with the 13.2 inch depth in the title and bullets. The title also calls it a blanket holder.
Yaocom 4-set
The Yaocom listing pairs 2 corner hay feeder frames with 4 hay nets, and the maker describes the nets as slowing the eating rate. The frame measures around 18.03 x 12.99 inches in the bullets, with a paired hay net of about 40.16 inches, while the spec table gives 20.87 x 16.54 x 6.89 inches. The frames are metal with a matte black anti-rust coating, and the nets are robust nylon netting. The spec table counts 4 items while the bullets describe 2 frames plus 4 nets.
Corner racks: what the listings state
All 4 listings mount in a corner and keep hay off the floor. The Topyznsup and Yaocom listings state a wall-mounted, corner design that keeps hay off the ground, with the Yaocom holding feed off the ground to shield it from moisture. The SGOLAN listing states a wall-mounted rack with all hardware included, and the ICITYWALL listing states a corner design that saves space, with rounded edges.
Round racks: what changes in the open pen
A round rack stands in the open rather than in a corner, so goats reach it from every side instead of from the front only. That shape suits a pasture or a large pen with no solid wall to mount on. No round rack appears among the 4 listings in this guide, so this section states no capacity, size or material for the round style: the 4 listings give those numbers for corner racks only. When comparing a round rack later, check the same points: capacity, material, mounting and gap spacing.
Reading capacity against your herd
The Topyznsup is the only listing that states capacity in gallons, at 25 gallons. The other listings state dimensions instead, from 18.03 x 12.99 inches to 29.5 x 13.8 x 26.7 inches. None of the listings converts gallons into a weight of hay, so treat gallons as a way to rank feeders against each other, not as a daily ration.
Mounting and where the feeder goes
Mounting decides how stable the feeder is and how easy it is to fill. Wall racks need a solid wall, post or fence board to anchor into, so check what the barn offers before ordering. The Topyznsup listing includes the tools for installation, the SGOLAN listing includes all wall-mount hardware and screws, and the Yaocom listing includes screws. The ICITYWALL listing describes fixing the base first, then assembling the main body and the top separately. Place hay feeders away from water buckets so dropped hay stays dry, and keep a separate goat mineral feeder nearby.
Materials: carbon steel, galvanized steel or netting
Material sets how long a feeder lasts outdoors. The listings in this guide use 3 materials:
- Carbon steel: the Topyznsup rack, with a rust-resistant coating, and the SGOLAN rack, described as rust resistant.
- Galvanized steel with black coating: the ICITYWALL rack, described as rust resistant and durable.
- Metal frame with nylon netting: the Yaocom set, with a matte black anti-rust coating and robust nylon netting.
Steel racks hold up to chewing better than netting, and the SGOLAN listing states its steel resists chewing. Netting trades durability for a slower eating rate.
Read the listing twice
Hay rack listings often contradict themselves:
- Yaocom: 18.03 x 12.99 inches for the frame in the bullets against 20.87 x 16.54 x 6.89 inches in the spec table, and a count of 4 items in the spec table against 2 frames plus 4 nets in the bullets.
- SGOLAN: 23.3 x 13.2 x 21.7 inches in the title and bullets against 23.62 x 3.94 x 21.65 inches in the spec table.
- ICITYWALL: 29.5 x 13.8 x 26.7 inches in the title against 29.5 inches wide by 20.8 inches deep on top in the bullets.
- Topyznsup: the title spells the design “No Wast” and the use “Idea for Sheep”, which read as misspellings rather than numbers.
Measure the corner before ordering and allow for the larger figure.
What this guide does not cover
This guide covers feeder hardware only. It does not cover how much hay a goat needs, hay types or any health question. Ask a veterinarian or local extension office about rations and goat health.
FAQs from goat keepers
Should a corner hay rack or a round hay rack go in a small barn?
A corner rack suits a small barn, since it tucks into the angle of the walls. The Topyznsup, Yaocom, SGOLAN and ICITYWALL listings all mount in a corner, and the Topyznsup listing states its wall-mounted design frees up floor space. A round rack needs open ground, so it suits a pasture or a large pen instead.
How much hay does a corner rack hold?
Only the Topyznsup listing states a capacity in gallons, at 25 gallons. The other listings state dimensions instead: 18.03 x 12.99 inches on the Yaocom frame, 23.3 x 13.2 x 21.7 inches on the SGOLAN rack and 29.5 x 13.8 x 26.7 inches on the ICITYWALL rack. None of the listings converts gallons into a weight of hay.
Do these racks come with mounting hardware?
3 of them state it. The Topyznsup listing includes the tools for installation, the SGOLAN listing includes all wall-mount hardware and screws, and the Yaocom listing includes screws. The ICITYWALL listing describes fixing the base first, then assembling the rest separately, with no hardware list stated.
What keeps hay off the ground?
Wall mounting and corner installation. The Topyznsup listing states its wall-mounted design keeps hay off the ground, and the Yaocom listing states the corner installation holds feed off the ground to shield it from moisture.
Which rack lists rounded edges?
The ICITYWALL rack. Its listing states rounded edges that prevent injuries to livestock, along with a galvanized steel frame with a black coating. No other listing in this guide states rounded edges.
More from the barn
See every hay feeder guide and all feeding and water guides.
More picks: best hay feeders for goats, goat mineral feeders, heated water buckets and goat shelters.
