
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Gate Keeper GM ELEC01 Hasp9.6/10View on Amazon - 2
Ayxwkyfc Chain Link Latch9.5/10View on Amazon - 3
Rainspire Hook and Eye Latch9.4/10View on Amazon
The gate latch vs gate hasp question comes up on a morning when a goat leans against the gate while you carry hay with both hands. A latch drops, hooks or slides into place and holds the gate shut. A hasp gives a padlock somewhere to sit, so the gate stays shut until a keyholder opens it. This comparison looks at a hook and eye latch, a chain link latch and a shared-access hasp, and weighs what each one states about material, size and padlock fit.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick verdict: choose the latch side if the gate opens and shuts all day and the job is keeping goats in their pen with a fast hand motion, as the Rainspire hook and eye example shows with its 2-pack and included screws, and the Ayxwkyfc example shows with its fit for 1-3/8 inch chain link pipe. Choose the hasp side if the gate guards a shared yard, a rental pen or a panel where more than one keyholder needs in, as the Gate Keeper example shows with room for 2 padlocks.
The examples
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | Gate Keeper GM ELEC01 Hasp | 9.6/10 | Buy on Amazon |
| 2 | Ayxwkyfc Chain Link Latch | 9.5/10 | Buy on Amazon |
| 3 | Rainspire Hook and Eye Latch | 9.4/10 | Buy on Amazon |

Gate Keeper GM ELEC01 Hasp
A low-profile hasp that lets 2 keyholders use their own padlocks on one gate, made in the USA from heavy-duty 10-gauge carbon steel.
Pros
- Holds 2 padlocks at once, so 2 keyholders keep separate keys
- 10-gauge carbon steel, case-hardened and plated
- 3/8 inch U-bolt and 1/2 inch link holes, sized for standard padlocks
- Made in the USA with a low-profile shape for small spaces
Cons
- No warranty term is stated
- Padlocks are not included; each keyholder supplies their own
- Built for shared commercial access, so it may be more hasp than a home goat gate needs
- Only 1 unit in the box; a second gate needs a second hasp

Ayxwkyfc Chain Link Latch
A galvanized steel latch that mounts flat on a wall or post and fits 1-3/8 inch chain link gate pipe, with a padlock hole.
Pros
- Fits 1-3/8 inch chain link fence pipe gate posts
- Galvanized steel to prevent rusting
- Padlock hole for added locking; padlock not included
- Mounts on walls, wood posts or flat vertical surfaces with nuts and bolts included
Cons
- No warranty term is stated
- Padlock not included
- Only 1 latch in the box

Rainspire Hook and Eye Latch
A 2-pack of black stainless steel hook and eye latches with screws, sized 4 inch, for small gates, shed doors and cabinets.
Pros
- 2-pack covers 2 doors or gates with one purchase
- Stainless steel with a rust-resistant coating
- Mounting screws included; no special tool needed
- Countersunk screw holes keep screw heads flush
Cons
- No padlock hole is stated
- No warranty term is stated
- Listing says wipe it dry after rain, so it needs care in wet weather
As an Amazon Associate I earn from qualifying purchases.
Also worth comparing
Door Hasp Padlock LatchCheck price on Amazon
Door Locks Hasp LatchCheck price on Amazon
SANKINS 4.5" Swivel Staple Safety Hasps Latches with TwistCheck price on Amazon
D&D LL3ABL LokkLatch Lockable Gate Latch with External AccessCheck price on Amazon
HILLMASTER Heavy Duty Door Hasp Latch 7-3/4" Extra ThickCheck price on Amazon
VDAMZVO 4-1/2" Swivel Staple Safety HaspsCheck price on Amazon
Gate latch vs gate hasp: side by side
| Fastener | GoatGear Score | Type | Material | Size | Padlock fit | Amazon |
|---|---|---|---|---|---|---|
| Gate Keeper GM ELEC01 Hasp | 9.6/10 | Gate hasp | 10-gauge carbon steel | 3.5 x 2.25 x 0.37 inches | 2 padlocks | View on Amazon |
| Ayxwkyfc Chain Link Latch | 9.5/10 | Gate latch | Galvanized steel | Fits 1-3/8 inch pipe | 1 padlock hole | View on Amazon |
| Rainspire Hook and Eye Latch | 9.4/10 | Gate latch | Stainless steel | 4 inch, 2-pack | Not stated | View on Amazon |
Every spec repeats the brand’s rating from its listing (collected on 10 November 2026).
How a latch holds a gate
A gate latch is a moving part that catches. The Rainspire hook and eye latch is a hook that drops into an eye, and it mounts with screws on wood or other flat surfaces. The Ayxwkyfc latch is a flat back latch that bolts to a wall, a wood post or a flat surface and catches a chain link gate. Both close with a hand motion, which suits a gate that opens and shuts through the day. The Rainspire listing states no padlock hole, so it holds by the hook alone, while the Ayxwkyfc listing states a padlock hole for added locking, with the padlock not included.
How a hasp holds a gate
A gate hasp is a fixed plate a padlock closes through. The Gate Keeper GM ELEC01 hasp is a low-profile plate that lets 2 keyholders use their own padlocks on one gate, so nobody locks anyone else out. The listing states it fits gates, electrical panels, shared driveways and rental properties. The hasp needs a padlock to do its job, and the listing states it works with standard padlocks and with Knox series emergency padlocks, with a 3/8 inch U-bolt and 1/2 inch link holes. For a keeper who wants a lockable gate rather than a padlock plate, our best outdoor gate lock picks list complete locks.
Material and weather
The 3 listings name 3 different materials. The Gate Keeper hasp is heavy-duty 10-gauge carbon steel, roto-blasted, case-hardened and plated, and the listing calls the steel weather resistant. The Ayxwkyfc latch is galvanized steel, which prevents rusting per the listing. The Rainspire hook and eye latch is stainless steel with a rust-resistant coating, and the listing tells the keeper to wipe it dry after rain. The hasp listing gives more detail about its steel than the other 2 listings, while the hook and eye latch adds a care step after rain.
Size, fit and the box
Size decides whether the fastener fits the gate at all. The Ayxwkyfc latch is made for 1-3/8 inch chain link fence pipe gate posts, with an outside diameter of 1-1/2 inch. The Gate Keeper hasp measures 3.5 by 2.25 by 0.37 inches, a low-profile plate for small spaces. The Rainspire hook and eye latch carries a 4 inch size name, while its bullets state a 6 inch length and its spec table lists 4.0 by 1.1 by 0.7 inches.
On contents, the Rainspire box holds 2 latches and screws, with 4 screws per hook, the Ayxwkyfc box holds 1 latch with nuts and bolts, and the Gate Keeper box holds 1 hasp, with padlocks separate.
Padlocks and shared access
Only 2 of the 3 listings state a padlock fit. The Gate Keeper hasp holds 2 padlocks at once, so a fire department, a utility crew and the keeper can each hold a key without locking each other out. The Ayxwkyfc latch has a single padlock hole, so one padlock locks one gate. The Rainspire hook and eye listing states no padlock hole at all, so it cannot take a padlock. Keepers who need shared access should look at hasps built for it, such as the best heavy duty black gate hasp with lock picks.
Warranty and listing gaps to check
No listing in this comparison states a warranty term, so all 3 score zero on warranty. The Gate Keeper listing gives a 3.5 by 2.25 by 0.37 inch plate and 10-gauge steel but no warranty, the Ayxwkyfc listing gives galvanized steel and a padlock hole but no warranty, and the Rainspire listing gives stainless steel and a 2-pack but no warranty. More gaps: the Rainspire size line disagrees with itself, the Ayxwkyfc spec table lists 0.1 inch dimensions that cannot describe a gate latch, and the Gate Keeper listing names no mounting hardware. If any of those points decides your purchase, ask the seller before you order.
Which should you choose?
Choose a gate latch if the gate opens and shuts through the day and the job is a quick catch, as the Rainspire example shows with its 2-pack and included screws, and the Ayxwkyfc example shows with its fit for 1-3/8 inch chain link pipe and its padlock hole. Keepers with a pipe gate can also read our pipe gate vs panel gate comparison.
Choose a gate hasp if the gate guards shared ground and more than one keyholder needs in, as the Gate Keeper example shows with room for 2 padlocks on one hasp and a 3/8 inch U-bolt. If the gate is a chain link gate and only one padlock is needed, the Ayxwkyfc latch covers that job with less hardware. Whichever you pick, check the screws and the catch before turning goats out.
Around the Barn
- Wipe the hook and eye latch dry after rain, as the Rainspire listing advises.
- Keep the padlock hole on the chain link latch clear so a padlock slides in.
- Check screws and bolts on each latch after storms, before turning goats out.
FAQs from goat keepers
Should a goat gate use a latch or a hasp?
It depends on how the gate is used. A latch suits a gate that opens and shuts through the day, as the Rainspire and Ayxwkyfc examples show. A hasp suits a gate where more than one keyholder needs in, as the Gate Keeper example shows with room for 2 padlocks.
What size gate latch fits a chain link gate?
Match the latch to the pipe: the Ayxwkyfc latch fits 1-3/8 inch chain link fence pipe gate posts, with an outside diameter of 1-1/2 inch. Measure the pipe before ordering: the Rainspire listing gives a 4 inch size name and a 6 inch bullet length that disagree.
Can two people lock the same gate?
Yes, with a hasp built for it. The Gate Keeper GM ELEC01 hasp holds 2 padlocks at once, so 2 keyholders can use their own padlocks on one gate. The Ayxwkyfc latch holds a single padlock, and the Rainspire listing states no padlock hole.
Does a hook and eye latch take a padlock?
Not the one in this comparison. The Rainspire hook and eye listing states no padlock hole, so it holds by the hook alone. A keeper who wants a lockable catch should look at the Ayxwkyfc latch, which states a padlock hole, or at the Gate Keeper GM ELEC01 hasp.
What are gate latches and hasps made from?
The listings name 3 materials: the Gate Keeper hasp is 10-gauge carbon steel, case-hardened and plated; the Ayxwkyfc latch is galvanized steel; and the Rainspire latch is stainless steel with a rust-resistant coating.
Behind the Farm Score
| Product | GoatGear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Gate Keeper GM ELEC01 Hasp | 9.6 | 32 | 22 | 20 | 5 | 0 |
| Ayxwkyfc Chain Link Latch | 9.5 | 28 | 20 | 20 | 3 | 0 |
| Rainspire Hook and Eye Latch | 9.4 | 26 | 19 | 21 | 0 | 0 |
We translate each weighted point total onto the 9.2 through 9.8 band; ranks never flip, because the conversion is linear.
The GoatGear Score weighs performance, build, value, safety and warranty. For gate fasteners, safety points need a stated locking feature such as a padlock hole or a padlock capacity; the hasp and the chain link latch state one, and the hook and eye latch states none. No listing states a warranty term, so all 3 score zero on warranty. The Gate Keeper leads on stated steel and 2-padlock capacity, the Ayxwkyfc scores on fit for chain link pipe and loses points for the spec table errors, and the Rainspire scores on 2-pack value and loses points for the size disagreement. How we pick explains the weights.
More from the barn
See every goat fencing guide and all fencing and shelter guides.
More picks: outdoor gate locks, heavy duty black gate hasps with lock, pipe gate vs panel gate and pipe gates.
