
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Crommie Stainless Mold9.6/10View on Amazon - 2
Wadoy Plastic Tofu Press9.6/10View on Amazon - 3
Russia Pascha Cheese Mold9.4/10View on Amazon
The plastic vs stainless cheese mold question comes up as soon as a goat keeper’s milk turns into a cheese habit. Both sides press curd into shape; the difference is what the mold is made of and what it is built to do, as the three listings here show.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick verdict: choose the stainless side if you press small batches often and want steel that cleans easily, as the Crommie example shows with its 350 ml food-grade stainless mold and pressing lid. Choose the plastic side if you want a complete starter kit, as the Wadoy example shows with 2 molds and cheese cloths in food-grade plastic. The Russia Pascha mold is a plastic specialty pick for Easter cheese only.
Three examples
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | Crommie Stainless Mold | 9.6/10 | Buy on Amazon |
| 2 | Wadoy Plastic Tofu Press | 9.6/10 | Buy on Amazon |
| 3 | Russia Pascha Cheese Mold | 9.4/10 | Buy on Amazon |

Crommie Stainless Mold
A food-grade stainless steel round mold with lid for pressing paneer and fresh cheese.
Pros
- Food-grade stainless steel, durable and easy to clean per the listing
- Lid presses from the top to drain liquid, a real pressing action
- Compact 5 x 5 x 2 in size at 0.18 kg for small batches
- 350 ml capacity stated for paneer, cheese and tofu
Cons
- Single small mold, no extra pieces in the box
- 350 ml suits small batches only
- No warranty term is stated

Wadoy Plastic Tofu Press
Two food-grade plastic press molds with cheese cloths for tofu and fresh cheese.
Pros
- Two molds plus reusable cheese cloths in one kit
- Drainage slots release liquid while the press plate shapes the block
- Food-grade plastic with a smooth surface for everyday use
- Clear 5.5 x 4.1 x 3.5 in size at 9.6 ounces
Cons
- Plastic rather than steel for long-term durability
- Square shape only, no round option
- No stated weight or capacity figure
- No warranty term is stated

Russia Pascha Cheese Mold
A red plastic Easter cheese mold with cross bars and XB lettering for pascha.
Pros
- 1 kg capacity suits a full Easter pascha
- Three cross bars and XB letters mold the traditional pattern
- 16 cm high and 12.2 cm wide, a tall single mold
- Plastic construction keeps it light
Cons
- Food-grade plastic is not stated, only 'Plastic'
- Hand wash only, per the listing
- A specialty Easter shape, not an everyday press
- No warranty term is stated
As an Amazon Associate I earn from qualifying purchases.
Also worth comparing
PetriStor 5 pcs Soft Cheese Mold for Cheese Making 0.8QTCheck price on Amazon
New England Cheesemaking Supply Co. Hard Cheese MoldCheck price on Amazon
PetriStor 5 pcs Soft Cheese Mold for Cheese Making 0.7QTCheck price on Amazon
Cheese Mold for Cheese MakingCheck price on Amazon
Cheese Mold for Cheese Making 20 ozCheck price on Amazon
PetriStor Cheese Mold for Cheese Making Cheese with FollowerCheck price on Amazon
Plastic vs stainless cheese mold: side by side
| Cheese mold | GoatGear Score | Side | Material | Size | Capacity | Amazon |
|---|---|---|---|---|---|---|
| Crommie Stainless Mold | 9.6/10 | Stainless | Food-grade stainless steel | 5 x 5 x 2 in | 350 ml | View on Amazon |
| Wadoy Plastic Tofu Press | 9.6/10 | Plastic | Food-grade plastic | 5.5 x 4.1 x 3.5 in | Not stated | View on Amazon |
| Russia Pascha Cheese Mold | 9.4/10 | Plastic | Plastic | 6,3 in tall | 1 kg | View on Amazon |
19 October 2026
How each one presses
The Crommie stainless mold presses with a lid that slides in place and pushes from the top to drain liquid through a cloth lining. The Wadoy plastic molds press with a press plate over drainage slots that release liquid while shaping the block. The Russia mold is a shaping mold rather than a press: its three cross bars and XB letters pattern the cheese, with no pressing mechanism described.
Material: what the listings state
The Crommie listing states food-grade stainless steel, durable and easy to clean. The Wadoy listing states food-grade plastic with a smooth surface for everyday use. The Russia listing states only “Plastic” with no food-grade claim, and hand wash only care. Do not treat one listing’s material claim as a category claim: the Crommie’s food-grade steel says nothing about every stainless mold, and the Russia’s plain plastic says nothing about the Wadoy’s food-grade plastic.
Size and capacity
The Crommie is the smallest at 5 x 5 x 2 in with a 350 ml capacity, built for small rounds. The Wadoy molds measure 5.5 x 4.1 x 3.5 in at 9.6 ounces, with no capacity figure stated. The Russia mold is the tallest at 6,3 in with a 1 kg capacity, built for a full Easter pascha. Match the mold to the batch, not the other way around.
Warranty and listing gaps to check
None of the three listings states a warranty term, so every warranty score here is 0. The gaps to check: the Wadoy states no capacity, the Russia states no food-grade material, and the Crommie’s spec table carries a ‘Stainlees Steel’ typo. Read each listing twice before buying.
Which should you choose?
Pick the Crommie stainless mold for small-batch pressing that cleans easily. Pick the Wadoy 2-pack for a complete plastic starter kit with cloths. Pick the Russia Pascha mold only for traditional Easter cheese. For more cheesemaking gear see our cheese making kits guides.
Around the Barn
- Line each mold with a cheese cloth before adding curd, per the Crommie and Wadoy listings.
- Press the Crommie lid from the top to drain liquid; place the Wadoy molds on a flat surface during use.
- Hand wash the Russia Pascha mold; the listing states hand wash only.
- Check the spec tables for typos, like the Crommie’s ‘Stainlees Steel’, and trust the bullets when they disagree.
FAQs from goat keepers
Is plastic or stainless better for cheese molds?
The listings do not settle it as a category rule. The Crommie stainless example is food-grade steel built for small batches; the Wadoy plastic example is food-grade plastic in a 2-pack kit. Pick by batch size and kit needs.
Which mold is best for Easter pascha?
The Russia Pascha mold, with its three cross bars, XB letters and 1 kg capacity, is the only listing built for it.
Do any of these state a warranty?
No. None of the three listings states a warranty term.
Can the plastic molds make tofu too?
The Wadoy and Crommie listings both name tofu alongside cheese and paneer as uses for their molds.
Behind the Farm Score
| Product | GoatGear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Crommie Stainless Mold | 9.6 | 30 | 22 | 20 | 5 | 0 |
| Wadoy Plastic Tofu Press | 9.6 | 29 | 21 | 21 | 5 | 0 |
| Russia Pascha Cheese Mold | 9.4 | 27 | 20 | 19 | 0 | 0 |
A score of 9.2 marks the weakest point total on our scale and 9.8 the strongest; totals in between are placed proportionally.
More from the barn
See every cheese making kit guide and all milking guides.
