Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Round vs Square Cheese Press: Which One Should You Buy?

Round vs square cheese press, compared on a Crommie square mould, round cast iron presses and a cheesecloth, with shape, material and size side by side.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

Round vs Square Cheese Press: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Crommie Square MouldCrommie Square Mould9.6/10View on Amazon
  2. 2EWFEN Round PressEWFEN Round Press9.5/10View on Amazon
  3. 3Firsgrill Round PressFirsgrill Round Press9.5/10View on Amazon
  4. 4eFond CheeseclotheFond Cheesecloth9.4/10View on Amazon

The round vs square cheese press question comes up at the draining board after morning milking, when curds are ready for the mould. This comparison looks at round and square listings side by side, using only what each listing publishes. A round face suits a wheel, while a square mould suits a block, yet material, size and stated use matter just as much as shape.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick verdict: choose the square side if the goal is a finished block from a dedicated cheese mould, as the Crommie example shows with its stainless steel square mould. Choose the round side if the job is pressing flat food on a griddle, as the Firsgrill and EWFEN examples show with cast iron round faces and wood handles, though neither round listing describes itself as a cheese mould. The eFond cheesecloth belongs on the square side, yet it is cloth for lining a mould, not a press on its own.

Two examples

Crommie Square Mould

Crommie Square Mould

Crommie9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A stainless steel square mould for making paneer, tofu and cheese, with a lid pressed from the top to drain liquid.

Pros

  • Square stainless steel mould made for paneer, tofu and cheese
  • Food grade stainless steel that the listing describes as durable and easy to clean
  • 450ml capacity with 5.5 x 5.5 x 2.5 inches stated in the spec table
  • Lid pressed from the top to drain liquid, with a base that slides into place

Cons

  • No warranty term is stated
  • No guidance on curd size beyond the 450ml capacity
  • Square shape only, so it cannot make a round wheel
EWFEN Round Press

EWFEN Round Press

EWFEN9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A round cast iron grill press with a grooved bottom and a wood handle, for burgers, bacon, steak and sandwiches on griddles and grills.

Pros

  • Heavy duty food grade cast iron with a grooved bottom
  • Wood handle described as smooth, without burrs, and cool to touch
  • Round face sized at 7.0 x 7.0 x 2.0 inches in the spec table
  • Can be seasoned like a cast iron skillet for a non-stick surface

Cons

  • No weight is stated in the listing
  • No warranty term is stated
  • Listing describes a grill press for burgers and bacon, not a cheese mould
  • Grooved bottom suits grill marks, which a cheese mould does not need
Firsgrill Round Press

Firsgrill Round Press

Firsgrill9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A cast iron grill press with a wood handle and a flat bottom, described for smash burgers, bacon and steak on griddles and grills.

Pros

  • 7.08 inch round face sized to cover patties with even contact
  • Cast iron with a BPA-free, heat-resistant handle
  • Flat, stable base with a non-slip grip
  • Pre-seasoned surface that wipes clean and resists rust when properly dried

Cons

  • Title and size name both Round and Rectangle, while bullets describe a round press
  • Listing describes a burger and grill press, not a cheese mould
  • No warranty term is stated
eFond Cheesecloth

eFond Cheesecloth

eFond9.4/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An unbleached pure cotton cheesecloth with hemmed edges, for straining and for lining a mould.

Pros

  • Grade 100 ultra fine mesh for straining nut milk and fruit
  • 9 square feet of cloth that can be cut freely to the size needed
  • Hemmed edges that reduce shedding of lint threads after cutting
  • Unbleached pure cotton with no chemical smell, only a natural cotton smell

Cons

  • Cloth, not a press, so it needs a mould to press cheese
  • No warranty term is stated
  • Short edges are left raw, unlike the hemmed long edges
  • Sold as a single cloth, with no mould

As an Amazon Associate I earn from qualifying purchases.


Also worth comparing

Round vs square cheese press: side by side

Press GoatGear Score Shape Material Size Weight Amazon
Crommie Square Mould 9.6/10 Square Stainless steel 5.5 x 5.5 x 2.5 inches Not stated View on Amazon
EWFEN Round Press 9.5/10 Round Cast iron 7.0 x 7.0 x 2.0 inches Not stated View on Amazon
Firsgrill Round Press 9.5/10 Round Cast iron 8.3 x 7.0 x 3.0 inches 2.5 pounds View on Amazon
eFond Cheesecloth 9.4/10 Square Unbleached cotton 36.0 x 36.0 x 0.07 inches Not stated View on Amazon

Every spec repeats the brand’s rating from its listing (collected on 1 November 2026).

How shape changes the finished cheese

Shape decides the outline of the finished cheese. A round press gives a wheel, and a square mould gives a block that stacks neatly. The Crommie listing is the only one here that describes itself as a cheese maker mould, naming paneer, tofu and cheese, with a lid pressed from the top to drain liquid. That is the square side at its clearest: a mould built for cheese.

The round side tells a different story. Both round listings describe grill presses for burgers, bacon, steak and sandwiches, with grooved or flat bottoms for griddle work. Neither names cheese as a use, so the round side rests on shape alone: a round face, rather than a round cheese mould. A keeper who wants a round wheel will not find that mould in these round listings.

Material, size and weight

Material splits the group cleanly. The Crommie mould is stainless steel, described as durable and easy to clean, at 5.5 x 5.5 x 2.5 inches with a 450ml capacity. The eFond cloth is unbleached pure cotton, Grade 100, at 36.0 x 36.0 x 0.07 inches and 9 square feet, made to be cut to the size needed. For more square options, see our best square cheese press picks.

Both round presses are cast iron. The Firsgrill listing gives 8.3 x 7.0 x 3.0 inches and 2.5 pounds, with a 7.08 inch round face and a BPA-free, heat-resistant handle. The EWFEN listing gives 7.0 x 7.0 x 2.0 inches, a grooved bottom and a wood handle, and states no weight. Cast iron needs drying and seasoning care, while stainless steel and cotton ask less of the keeper after pressing.

Listing gaps to check

Each listing leaves something unclear. The Firsgrill title and size field name both Round and Rectangle, while the bullets describe a round press, so trust the bullets on shape. The EWFEN listing states no weight, and neither round listing states a warranty term. The eFond listing is cloth, not a press, and the Crommie spec table writes its weight as a long decimal figure that is hard to use. None states a warranty term, so none earns warranty points. Our round vs square cheese mold comparison looks at the same shape question.

Which should you choose?

Choose a square cheese press if the goal is a finished block from a dedicated mould, as the Crommie example shows with its stainless steel square shape and 450ml capacity. Line it with cheesecloth, as its own bullets describe. Keepers making soft cheeses can also compare our best cheese mold for queso fresco picks.

Choose a round press if the job is pressing flat food on a griddle, as the Firsgrill and EWFEN examples show with cast iron round faces and wood handles. If the goal is cheese rather than griddle food, the round listings here do not cover it, and the square mould is the honest pick from this group. Treat every claim here as the maker’s claim, and check the listing for weight, warranty and shape before ordering.

Around the Barn

  • Line a square mould with cheesecloth before pressing.
  • Dry cast iron after washing so it resists rust.
  • Season a cast iron press like a skillet for a non-stick surface.
  • Cut cheesecloth to the size needed.

FAQs from goat keepers

Does a round or square cheese press make better cheese?

No listing here states that shape changes cheese quality. Shape decides whether the finished cheese is a wheel or a block, and the Crommie square mould is the only listing that describes itself as a cheese maker mould.

Can a burger press work as a cheese press?

Not on the evidence of these listings. The round listings describe grill presses for burgers, bacon, steak and sandwiches, not cheese moulds. The Crommie listing describes pressing paneer, tofu and cheese with a lid pressed from the top.

What size square mould suits a small batch?

The Crommie mould lists a 450ml capacity and 5.5 x 5.5 x 2.5 inches, which suits a small batch. The eFond cloth can be cut freely to the size needed.

Is cheesecloth part of a cheese press?

Cheesecloth is a lining, not a press. The eFond listing gives Grade 100 cloth at 9 square feet with hemmed edges, and the Crommie bullets say to line the mould before pressing.

Which material is easiest to clean?

The Crommie stainless steel mould is described as easy to clean and maintain. The Firsgrill cast iron wipes clean and resists rust when properly dried.

Crommie Square Mould
Still deciding? Our top pickCrommie Square Mould
Check price on Amazon

Behind the Farm Score

Product GoatGear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Crommie Square Mould 9.6 29 21 20 7 0
EWFEN Round Press 9.5 28 20 20 7 0
Firsgrill Round Press 9.5 28 20 19 7 0
eFond Cheesecloth 9.4 26 19 20 0 0

We translate each weighted point total onto the 9.2 through 9.8 band; ranks never flip, because the conversion is linear.

The GoatGear Score weighs performance, build, value, safety and warranty. Safety points need a stated food-grade material or a stated safety feature such as a BPA-free handle, which the Crommie, EWFEN and Firsgrill listings state and the eFond cloth listing does not. The Crommie leads as a dedicated cheese mould with clear dimensions and capacity. The round presses score well on stated cast iron construction and lose points for describing grill use rather than cheese use. How we pick explains the weights.

More from the barn

See every cheese making kit guide and all milking guides.

More picks: square cheese presses, cheesecloth for straining milk, round vs square cheese molds and cheese molds for queso fresco.