Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Snaffle Bit vs Curb Bit: Which One Should You Buy?

Snaffle bit vs curb bit explained through two stainless steel snaffle listings, with the decorative snaffle-bit buckles flagged as tack to skip.

Snaffle Bit vs Curb Bit: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1SUPERFINDINGS 8Pcs Platinum Double D-Rings Snaffle BitSUPERFINDINGS 8Pcs Platinum Double D-Rings Snaffle BitView on Amazon
  2. 2SUPERFINDINGS 8Pcs 4 Colors D Ring Snaffle Bit Buckle HorseSUPERFINDINGS 8Pcs 4 Colors D Ring Snaffle Bit Buckle HorseView on Amazon
  3. 3Otoolling Stainless Steel D Ring Copper Snaffle Bit forOtoolling Stainless Steel D Ring Copper Snaffle Bit forView on Amazon
  4. 4Tucnoeu 2pcs Horse Bit Buckle Double Silk Scarf Buckle RingTucnoeu 2pcs Horse Bit Buckle Double Silk Scarf Buckle RingView on Amazon
  5. 5EQUSPUR Eggbutt Snaffle Bit 5-1/4 inchEQUSPUR Eggbutt Snaffle Bit 5-1/4 inchView on Amazon
  6. 6Elaraberry Horse Snaffle BitElaraberry Horse Snaffle BitView on Amazon

Morning chores in the barn start with the bridle, and the bit is the piece the horse feels with each rein cue. This guide answers snaffle bit vs curb bit directly: a snaffle works on direct pressure from the reins, while a curb adds leverage through shanks and a curb chain, so each bit suits different hands and different horses. The listings below show the difference in practice, with stainless steel snaffle bits to compare and decorative snaffle-bit buckles that are not riding bits at all.

Also worth comparing

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Snaffle bit vs curb bit: the short answer

A snaffle bit connects the reins straight to the mouthpiece, so the pressure the rider feels is the pressure the horse feels, with no leverage added. A curb bit adds shanks below the mouthpiece and a chain under the chin, so a light pull on the reins turns into stronger pressure on the mouth and chin. Riders usually start a young horse in a snaffle, because the signal is plain and direct, and move to a curb only when the horse is ready for a subtler, leveraged cue and the rider has the hands for it. The choice is about the horse in front of you and the riding you do, not about which bit looks stronger in the tack room.

None of the four listings in this guide is a curb bit. The riding bits here are snaffles, so this guide compares snaffle styles against each other and explains the curb side from the way curb bits work, rather than from a curb listing. If the bridle itself is the question, the halter vs bridle for horses guide covers that hardware.

Four listings compared

Listing Type Stated size Material
Otoolling Stainless Steel Ring Snaffle Bit Ring snaffle 5 inch Stainless steel with copper roller
EQUSPUR Eggbutt Snaffle Bit Eggbutt snaffle 5-1/4 inch Stainless steel
SUPERFINDINGS Double D-Ring Snaffle Bit Buckles Decorative buckle, not a riding bit 72mm long Alloy
Tucnoeu Horse Bit Buckle Scarf buckle, not a riding bit 8.5 x 2.15 cm Zinc alloy

Ring snaffle

The Otoolling bit is a stainless steel ring snaffle with a copper roller in the center of the mouthpiece and a jointed mouthpiece with a consistent diameter and rounded edges. The maker lists a mouth spacing of 5 inch and a fixed cheek design that helps prevent pinching, and the bit is listed for Western and English riding and for starting young horses or retraining. The spec table gives 10.55 x 3.15 x 0.91 inches and an item weight of 0.75 pounds, and the listing ships as a single bit. The title also mentions twisted wire, while the bullets describe a jointed mouthpiece with a copper roller and do not describe wire, so read the title and the bullets together before ordering.

Eggbutt snaffle

The EQUSPUR bit is a stainless steel eggbutt snaffle with a double jointed mouthpiece and an oval link, listed at 5-1/4 inch. The maker lists a smooth design with no sharp edges and a seamless build, and the bit is listed for trail riding and competitive dressage. The spec table lists the color as Eggbutt Bit-Brass, which sits oddly against a title and bullets that say stainless steel, so the color field looks like a listing error and the steel description is the one to trust. The listing ships as a single bit.

Snaffle-bit buckles are not riding bits

The other two listings use the words snaffle bit for decorative hardware. The SUPERFINDINGS listing is a set of 8 D-ring buckles in alloy, 72mm long, 21mm wide and 6mm thick, with an inner diameter of 13.5 x 8.5 mm, listed for necklaces, bracelets, wallets, handbags, scarves and loafer shoes. The Tucnoeu listing is a set of 2 scarf buckles in zinc alloy, 8.5 x 2.15 cm, listed in silver and gold for scarves, shirts, jewelry, wallets, handbags, bracelets and casual shoes. Neither listing describes a mouthpiece, a cheekpiece or a way to attach reins, and neither belongs in a bridle, so treat them as equestrian themed hardware and not as tack.

Reading mouth size against your horse

The two riding bits state their mouth sizes plainly: the Otoolling ring snaffle lists a mouth spacing of 5 inch, and the EQUSPUR eggbutt snaffle lists 5-1/4 inch. Mouth size is the width the bit spans, and the listings give no other fit figures, so the stated size is the only fit number to compare. The decorative buckles state craft sizes instead, 72mm long for the SUPERFINDINGS set and 8.5 x 2.15 cm for the Tucnoeu set, which are sizes for jewelry and scarves and say nothing about a horse. If the size you need is not the size a listing states, that listing is not the bit to order.

Materials: stainless steel, copper and alloy

Material is where the four listings split cleanly. The riding bits are stainless steel, and the Otoolling bit adds copper in the roller and inlays. The buckles are alloy, the SUPERFINDINGS set in a platinum color and the Tucnoeu set in zinc alloy in silver and gold. In these listings, stainless steel is the mouthpiece metal, while alloy is the craft hardware metal, and the material line alone tells you which listings are tack and which are decoration. Halters are the other piece of headgear in the tack room, and the leather vs nylon horse halter guide covers that choice.

Read the listing twice

Horse bit listings mix tack and decoration under the same words, and the figures that conflict are usually the ones that show it:

  • EQUSPUR: stainless steel in the title and bullets, but the spec table color reads Eggbutt Bit-Brass.
  • SUPERFINDINGS: snaffle bit in the title, but the bullets describe jewelry making hardware for necklaces and bracelets.
  • Tucnoeu: horse bit buckle in the title, but the bullets describe a silk scarf buckle in silver and gold.
  • Otoolling: twisted wire in the title, but the bullets describe a jointed mouthpiece and do not describe wire.

Measure the mouth spacing your horse needs before ordering, and allow for the stated size only. Listings that call themselves bits without a mouthpiece, a cheekpiece or reins are decoration, however equestrian the shape looks.

What this guide does not cover

This guide covers bit hardware only. It does not cover bitting a horse, training, or mouth problems. Ask your trainer or veterinarian about fitting and training questions.

FAQs from goat keepers

What is the difference between a snaffle bit and a curb bit?

A snaffle works on direct pressure from the reins to the mouthpiece, with no leverage. A curb adds shanks and a curb chain, so rein pressure turns into leveraged pressure on the mouth and chin, and it asks for a lighter and steadier hand.

Which snaffle bit sizes do the listings state?

The Otoolling ring snaffle lists a mouth spacing of 5 inch, and the EQUSPUR eggbutt snaffle lists 5-1/4 inch. No other fit sizes are stated in these listings.

Are snaffle-bit buckles the same as snaffle bits?

No. The SUPERFINDINGS and Tucnoeu listings are decorative buckles for jewelry, scarves and shoes, with craft sizes of 72mm long and 8.5 x 2.15 cm, and neither lists a mouthpiece or reins.

What materials are these snaffle bits?

Both riding bits are stainless steel, and the Otoolling bit adds a copper roller. The two buckle listings are alloy, in platinum for the SUPERFINDINGS set and in silver and gold for the Tucnoeu set.

More from the barn

See every horse tack guide and all horse care guides.

More picks: halter vs bridle for horses, leather vs nylon horse halters, English vs Western saddles and wool vs synthetic saddle pads.