Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Gate Latch for Chain Link Gate (2026): 10 Compared

The best gate latch for chain link gate: 5 latches compared on pipe fit, padlock holes and coatings, with picks for standard gates and kennels.

Best Gate Latch for Chain Link Gate (2026): 10 Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Jake Sales Fork Latch 1-5/8Best overallJake Sales Fork Latch 1-5/89.5/10View on Amazon
  2. 2VIVIDA Black Fork LatchBest for black fencesVIVIDA Black Fork Latch9.4/10View on Amazon
  3. 3Jake Sales Pool LatchBest safety pickJake Sales Pool Latch9.4/10View on Amazon
  4. 4Dailydanny Kennel LatchBest kennel latchDailydanny Kennel Latch9.3/10View on Amazon

The best gate latch for chain link gate setups is the one that matches your pipe sizes: measure the outside diameter of the gate frame and the post before ordering, because a 1-3/8 in latch will not fit a 1-5/8 in frame. We compared five latches on stated fit, locking, coating and hardware, and ranked them for chain link gates. The Jake Sales 1-5/8 in galvanized fork latch leads for standard gates; the VIVIDA black 1-3/8 in x 2-3/8 in fork latch is the pick for black fences. Five more latches, including double-gate models, sit in the more picks.

Also worth comparing

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick picks

  • Best overall Jake Sales Fork Latch 1-5/8: Galvanized fork latch for 1-5/8 in frames, padlock hole, bolts included. Check price on Amazon
  • Best for black fences VIVIDA Black Fork Latch: Black powder-coated fork latch, 1.8 to 4 in post spacing. Check price on Amazon
  • Best safety pick Jake Sales Pool Latch: Auto-locking pool latch, pad-lockable both sides. Check price on Amazon
  • Best kennel latch Dailydanny Kennel Latch: Butterfly latch for 1-3/8 in kennel frames. Check price on Amazon

The gear we picked

Each pick below carries our score.

More picks to compare

  • Jake Sales Butterfly LatchJake Sales Butterfly LatchAuto butterfly latch for 1-5/8 in gates, needs 2-5/16 in gap.Check on Amazon
  • VIVIDA Fork Latch 2ndVIVIDA Fork Latch 2ndSpare galvanized fork latch for 1-3/8 x 2-3/8 in.Check on Amazon
  • BiJun Double Gate LatchBiJun Double Gate LatchStrong-arm double gate latch for 1-3/8 in frames.Check on Amazon
  • Fixirons Double Gate LatchFixirons Double Gate LatchDouble gate latch for 1-3/8 in gate frames.Check on Amazon
  • Wmebee Fork LatchWmebee Fork LatchGalvanized fork latch with padlock hole, 1-3/8 x 2-3/8 in.Check on Amazon

Spec comparison

Five latches, ranked by our scores, plus five more picks below. Fit figures come from the listings; measure your own pipe first. Every latch here includes its mounting bolts.

Pick Fit Locking Verdict
Jake Sales Fork Latch 1-5/8 1-5/8 in frame, 2-3/8 in post Padlock hole Top pick
VIVIDA Black Fork Latch 1-3/8 in frame, 2-3/8 in post Padlock hole Best for black fences
VIVIDA Galv Fork Latch 1-3/8 in OD pipe Padlock hole Best galvanized
Jake Sales Pool Latch 1-3/8 x 2-3/8 in only Auto-locking Best safety pick
Dailydanny Kennel Latch 1-3/8 in frame to frame Not stated Best kennel latch

Start with measurements: every listing here stresses that the sizes are outside diameters of pipe. The common residential pairing is a 1-3/8 in gate frame with a 2-3/8 in post; larger gates use 1-5/8 in frames. Match the latch to both, then check the gap: the VIVIDA listings state the posts must sit 1.8 in apart, up to 3.4 or 4 in depending on model. Square posts do not fit fork latches at all.

Fork latches vs specialty latches

The fork latch is the standard: a fork drops over the post and a padlock through the hole locks it. Three picks here are fork latches in galvanized or black finishes. The butterfly latch suits kennel panels where the gate meets another 1-3/8 in frame with about 1 in of spacing. The auto-locking pool latch is the safety pick: it locks automatically and complies with most pool codes, pad-lockable from both sides. Pool code compliance matters where inspectors check: a self-closing, self-latching gate is the standard requirement, and the auto-locking latch provides the latching half.

Locking and coating

Every pick here has a padlock hole except where noted; the pool latch adds auto-locking. For coating, galvanized and hot-dip galvanized resist rust; the black VIVIDA is powder coated to match black chain link without repainting. All five include bolts, and the VIVIDAs include nuts too. Stainless hardware outlasts zinc in coastal air; inland, galvanized is plenty. Check the bolts yearly and replace any that show rust before they seize.

Measure twice

The listings repeat the warning because it matters: measure the outside diameter of your gate frame pipe and your post pipe, and the gap between them, before ordering. A latch that almost fits does not latch. If your sizes fall between standards, the more picks below cover double gates and other pairings.

A chain link gate is a rectangle of pipe: the gate frame, usually 1-3/8 or 1-5/8 in outside diameter, hinged to a terminal post, usually 2-3/8 in. The latch lives on the frame’s leading edge and catches the post when the gate closes. The gap between frame and post when closed is the critical dimension: too tight and the fork binds, too wide and it misses. The VIVIDA listings state their spacing windows explicitly, 1.8 to 3.4 in on the galvanized model and 1.8 to 4 in on the black, because the fork geometry only works inside that window.

Chain link fabric stretches across the frame, but the latch only cares about pipe. That is why every listing here quotes outside diameters: chain link pipe is sized by OD, and a tape around the pipe, divided by pi, is the honest measurement. Do not trust the nominal size on an old receipt; pipe varies. Measure the frame, measure the post, measure the gap, then match all three to the listing.

Installing a fork latch

Installing a fork latch is a two-bolt job. Hold the latch body against the gate frame at handle height and mark the bolt holes; drill through the frame pipe and bolt the latch on with the included hardware. The fork arm reaches across the gap to the post: when the gate closes, the fork drops over the post and the gate is latched. Thread a padlock through the hole and the gate is locked. The whole job takes minutes with a drill and a wrench, and the only critical step is the measuring you did before ordering.

If the gate sags, the fork misses the post. Fix the sag first: tighten the hinge bolts, check the post is plumb, and confirm the gap between frame and post matches the latch’s stated spacing. A latch cannot compensate for a gate that drags on the ground. For double gates, see the more picks: the BiJun and Fixirons strong-arm latches are made for pairs of 1-3/8 in frames.

When to replace a latch

Replace the latch when the fork no longer drops cleanly, when the padlock hole has wallowed out, or when rust has thinned the metal. A latch that needs a lift, a shove or a second try is a latch that will fail when something pushes the gate. Fork latches are cheap and the swap reuses the same bolt holes, so there is no reason to nurse a worn one. Keep a spare in the barn: the more picks include duplicate fork latches for exactly that.

Around the Barn

  • Measure pipe outside diameters before ordering any latch.
  • Match the latch to frame size, post size and gap.
  • Use the padlock hole; a latch without a lock is a suggestion.
  • Pick black powder coat for black fences, galvanized otherwise.

FAQs from goat keepers

What size latch do I need?

Measure the outside diameter of the gate frame and the post. Common pairings here are 1-3/8 in frames with 2-3/8 in posts, or 1-5/8 in frames with 2-3/8 in posts.

Do these latches include mounting hardware?

Yes. All five picks include bolts, and the VIVIDA latches include nuts as well.

Can I lock these latches?

All five have a padlock hole. The pool latch also auto-locks and is pad-lockable from both sides.

What if my gate sags?

Fix the sag before the latch: tighten hinges, plumb the post and confirm the gap matches the latch spacing. A latch cannot fix a dragging gate.

Will a fork latch fit a square post?

No. The VIVIDA listings state square posts are incompatible with fork latches.

Behind the Farm Score

We scored each latch on fit range, locking options, coating, included hardware and ease of install, using only the figures each listing states. Higher totals rank first.

More from the barn

Also see our best gate latch for pasture gate. Also see our best gate latch for double gates. Also see our best gate latch for goat pens.

More picks: gate latch for goat barn doors, field fence vs chain link and fence post driving vs concrete.