Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Hinge for Metal Gate (2026): 5 Hinges Compared

Five hinges for metal gates compared by capacity and installation, from 900-lb weld-on barrels to self-closing polymer hinges.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

Best Hinge for Metal Gate (2026): 5 Hinges Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Letowe 7in Barrel HingeBest OverallLetowe 7in Barrel Hinge9.6/10View on Amazon
  2. 2Pixplex 7in Barrel HingeBest Weld-OnPixplex 7in Barrel Hinge9.6/10View on Amazon
  3. 3D&D TruClose HingeBest Self-ClosingD&D TruClose Hinge9.5/10View on Amazon
  4. 4HILLMASTER Self-Closing HingeBest SafetyHILLMASTER Self-Closing Hinge9.5/10View on Amazon
  5. 5WENHUALI Wall Mount HingeBest Wall MountWENHUALI Wall Mount Hinge9.5/10View on Amazon

A metal gate is only as good as its hinges. A gate that sags, drags or slams is a hinge problem, not a gate problem. The best hinge for metal gate use carries the gate’s weight without sagging, survives weather and keeps swinging year after year. A failing hinge drags the gate, wears the latch and eventually drops the gate on someone’s foot. We compared five hinges by capacity, installation, self-closing features and finish, using only what each Amazon listing publishes.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick picks

The gear we picked

Letowe 7in Barrel Hinge

Letowe 7in Barrel Hinge

Letowe9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of 7-inch weld-on barrel hinges with 900 lbs capacity and grease fitting; the pick overall.

Pros

  • 900 lbs capacity, the highest here
  • Grease fitting keeps ball bearings lubricated
  • Weld-on with extra thick back plates
  • Matte black anti-rust coating

Cons

  • No warranty term is stated
  • Weld-on needs a welder
  • 7 inches may suit large gates only
  • No self-closing
Pixplex 7in Barrel Hinge

Pixplex 7in Barrel Hinge

Pixplex9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 2-pack of 7-inch weld-on barrel hinges with 900 lbs capacity and grease nipple; the pick for weld-on.

Pros

  • 900 lbs capacity, matches the top pick
  • Grease nipple for ball bearings
  • Cold roll steel barrel design
  • Matte black anti-rust coating

Cons

  • No warranty term is stated
  • Weld-on needs a welder
  • Near-duplicate of the Letowe
  • No self-closing
D&D TruClose Hinge

D&D TruClose Hinge

D&D TECHNOLOGIES9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A self-closing polymer hinge for square post metal gates up to 66 lbs; the pick for self-closing.

Pros

  • Self-closing with tension adjustment
  • Polymer will not rust or bind
  • Pool safety rated per listing
  • Includes brackets and screws

Cons

  • No warranty term is stated
  • 66 lbs max, not for heavy gates
  • Square posts only
  • Polymer, not steel
HILLMASTER Self-Closing Hinge

HILLMASTER Self-Closing Hinge

HILLMASTER9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Self-closing polymer hinges with safety cap and adjustable tension; the pick for safety.

Pros

  • Self-closing with adjustable tension
  • Safety cap prevents foothold use
  • Polymer and stainless, no rust
  • Fits 3/4-inch frame to post gap

Cons

  • No warranty term is stated
  • No capacity figure is stated
  • Nylon, not steel
  • 2-pack only
WENHUALI Wall Mount Hinge

WENHUALI Wall Mount Hinge

WENHUALI9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Wall-mount gate hinges with 5/8-inch pin and galvanized finish; the pick for wall mount.

Pros

  • Galvanized steel, rust resistant
  • 5/8-inch pin with screws included
  • No special tools needed
  • Suits fences, barns and sheds

Cons

  • No warranty term is stated
  • No capacity figure is stated
  • Wall mount only
  • No self-closing

As an Amazon Associate I earn from qualifying purchases.


Also worth comparing

More picks to compare

  • WENHUALI 4-PackWENHUALI 4-PackFor 4-pack: 5in, 450 lbs, weld-on, galvanized.Check on Amazon
  • Ozark Frame HingeOzark Frame HingeFor chain link: hot-dip galvanized, 5/8 pin hole.Check on Amazon
  • BORDERSMOVER BarrelBORDERSMOVER BarrelFor 5in: 450 lbs, weld-on, grease nipple.Check on Amazon
  • leevanoo Wall Mountleevanoo Wall MountFor anti-sag: 4.7in, steel, wall mount.Check on Amazon
  • HILLMASTER 130lbHILLMASTER 130lbFor 130 lbs: self-closing, adjustable tension.Check on Amazon

Spec comparison

Gate Hinge Barn Score Capacity Install Self-Closing Finish Amazon
Letowe 7in Barrel Hinge 9.6/10 900 lbs Weld-on No Matte black View on Amazon
Pixplex 7in Barrel Hinge 9.6/10 900 lbs Weld-on No Matte black View on Amazon
D&D TruClose Hinge 9.5/10 66 lbs Bolt-on Yes Black View on Amazon
HILLMASTER Self-Closing Hinge 9.5/10 Not stated Bolt-on Yes Powder coated View on Amazon
WENHUALI Wall Mount Hinge 9.5/10 Not stated Screw No Galvanized View on Amazon

Every spec repeats the brand’s rating from its listing (collected on 21 October 2026).

How to choose the best hinge for metal gate

Weight capacity

Match the hinge to the gate. The Letowe and Pixplex both claim 900 lbs capacity on 7-inch weld-on barrel hinges, which covers heavy driveway and farm gates. The D&D TruClose suits metal gates up to 66 lbs, which is a pedestrian or garden gate, not a driveway gate. The HILLMASTER and WENHUALI state no capacity, so they suit lighter gates where the listing’s use cases (pool gates, fence gates) apply.

A hinge that is too small sags and drags; when in doubt, size up. Remember the rating is per pair: two 900-lb hinges share the load, but a gate’s weight shifts as it swings, so the top hinge takes more stress. The D&D’s spec table lists 55 lbs in one place and 66 lbs in another; the title and bullets say 66, which is what we scored.

For a goat pen gate that goats will rub and push against, buy more capacity than the gate weighs. Goats lean, climb and head-butt gates; a hinge rated for the gate’s static weight can still fail under a goat’s dynamic load. The weld-on barrel hinges handle this best because the weld becomes part of the gate frame. Bolt-on hinges work if the bolts are checked regularly; a loose bolt on a self-closing hinge lets the gate slam, which wears the spring.

Weld-on vs bolt-on

The Letowe and Pixplex weld on, which is the strongest mount for a steel gate but needs a welder. The D&D and HILLMASTER bolt on with included hardware, and the WENHUALI screws to wall or post with a 5/8-inch pin. Weld-on hinges cannot be adjusted after welding, so measure twice. Bolt-on hinges can be moved, which suits gates that settle over time.

Pin size matters for chain link and farm gates. The WENHUALI’s 5/8-inch pin fits most gate frames per the listing, which is the standard size for farm gate hardware. The barrel hinges use an internal pin you never see; what matters there is the barrel diameter and back plate.

Finish decides how long the hinge lasts outdoors. The Letowe and Pixplex use matte black coatings, the HILLMASTER a black powder coat, and the WENHUALI galvanized steel. Galvanizing resists rust best in wet climates; powder coat looks better but chips. The D&D’s polymer needs no finish at all, which is its quiet advantage in rain. For gate hardware, see our gate latch vs gate bolt comparison.

Self-closing and safety

The D&D TruClose and HILLMASTER self-close with adjustable tension, which matters for pool gates, daycares and goat pens where a gate left open is a hazard. The D&D is rated for child water safety around pools per the listing; the HILLMASTER adds a safety cap so toddlers cannot use the hinge as a foothold. The barrel hinges have no self-closing; they swing free.

The Letowe and Pixplex keep their ball bearings greased through a grease fitting or nipple, which extends hinge life. Grease yearly; a dry barrel hinge wears fast and squeals. The D&D and HILLMASTER are self-lubricating polymer, which needs no grease but cannot match steel for load.

Self-closing tension needs tuning, not just setting. Too tight and the gate slams, wearing the latch and startling animals; too loose and it never latches. The D&D’s tension adjustment and the HILLMASTER’s spring tool both let you dial it in. Check with the gate at half swing: it should close firmly and latch without a bang. Re-tune seasonally; springs weaken and gates settle. For heavy gates, see our best gate latch for heavy gates picks.

Around the Barn

Hinges are install-and-forget only if you install them right. Set the gate level before welding or bolting; a hinge cannot fix a crooked gate. For weld-on hinges, tack first, check the swing, then weld fully. For bolt-on hinges, use the included hardware and check the bolts after the first month; new gates settle.

Pair the hinge with the right latch. A heavy gate on strong hinges still needs a latch that holds it shut against wind, weather and curious animals. The barrel hinges suit a chain or drop-rod latch; the self-closing hinges suit a gravity or spring latch that catches the closing gate. Buy the hinge and latch together so the mounting heights match.

  • Weigh the gate before choosing; a 66-lb hinge cannot carry a driveway gate.
  • Grease barrel hinges yearly through the fitting.
  • Adjust self-closing tension so the gate latches but does not slam.
  • Check bolt-on hinges each season; gates settle and bolts loosen.
  • Keep the swing path clear; a gate that hits the ground wears the hinges.
  • Paint welds after welding; bare welds rust first.

FAQs from goat keepers

Which hinge holds the most weight?

The Letowe and Pixplex both claim 900 lbs capacity. The D&D suits gates up to 66 lbs.

Do I need to weld these hinges?

Only the Letowe and Pixplex: they are weld-on. The D&D, HILLMASTER and WENHUALI bolt or screw on.

Which hinges self-close?

The D&D TruClose and HILLMASTER, both with adjustable tension. The barrel hinges swing free.

Which hinges suit a goat pen gate?

The self-closing D&D or HILLMASTER for safety, or a weld-on barrel hinge for a heavy pen gate.

Can I use these on a wooden gate?

The D&D and HILLMASTER list wood gates among their uses. The barrel hinges weld to steel, so they suit metal gates; the WENHUALI screws to wood or wall.

How often should I grease barrel hinges?

Yearly through the grease fitting, per the design. A squealing hinge is a dry hinge.

Letowe 7in Barrel Hinge
Still deciding? Our top pickLetowe 7in Barrel Hinge
Check price on Amazon

Behind the Farm Score

The Barn Score weighs performance, build, value, safety and warranty. Here performance means weight capacity and installation fit for a metal gate, while build covers the hinge material and finish. The Letowe leads on capacity, the D&D on safety features, and the WENHUALI on easy installation. None of the five listings states a warranty term. How we pick explains the weights.

Product GoatGear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
Letowe 7in Barrel Hinge 9.6 33 21 20 7 0
Pixplex 7in Barrel Hinge 9.6 32 20 20 7 0
D&D TruClose Hinge 9.5 29 19 19 8 0
HILLMASTER Self-Closing Hinge 9.5 28 19 19 8 0
WENHUALI Wall Mount Hinge 9.5 27 19 19 7 0

We translate each weighted point total onto the 9.2 through 9.8 band; ranks never flip, because the conversion is linear.

More from the barn

See every goat fencing guide and all fencing and shelter guides.

More picks: gate latches for escape artist goats, gate latches for livestock gates and gate hook vs gate latch.