
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallInsaga Lag Screw Hinge9.7/10View on Amazon - 2
Best Square PostDansydaisy Square Post Hinge9.7/10View on Amazon - 3
Best Multi-PackInsaga Chain Link Hinges9.6/10View on Amazon - 4
Best T-PostHomydom T-Post Hinge Pins9.6/10View on Amazon - 5
Best Farm GateAdamoss T-Post Hinge Pins9.6/10View on Amazon
A goat leaning hard on a gate at chore time will show every weak hinge in the fence line, and a gate that sags or drags turns a short chore into a long job, so best gate hinges for concrete posts deserve a careful look before a gate goes up. This roundup compares hinge listings by stated material, pin size, post fit and pack contents, using only what each listing publishes.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall Insaga Lag Screw Hinge: 304 stainless steel, one-piece molding, 5/8 inch solid pin Check price on Amazon
Best Square Post Dansydaisy Square Post Hinge: 1-1/2 inch square opening, galvanized steel, bolts and nuts included Check price on Amazon
Best Multi-Pack Insaga Chain Link Hinges: 4 pairs with carriage bolts for 2-3/8 inch posts Check price on Amazon
Best T-Post Homydom T-Post Hinge Pins: T-post pins for 5/8 inch or 3/4 inch hinge eyes, swing 200+ degrees Check price on Amazon
Best Farm Gate Adamoss T-Post Hinge Pins: Solid heavy steel pins for 5/8 inch or 3/4 inch hinge eyes Check price on Amazon
The gear we picked
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | Insaga Lag Screw Hinge | 9.7/10 | Buy on Amazon |
| 2 | Dansydaisy Square Post Hinge | 9.7/10 | Buy on Amazon |
| 3 | Insaga Chain Link Hinges | 9.6/10 | Buy on Amazon |
| 4 | Homydom T-Post Hinge Pins | 9.6/10 | Buy on Amazon |
| 5 | Adamoss T-Post Hinge Pins | 9.6/10 | Buy on Amazon |

Insaga Lag Screw Hinge
A 304 stainless steel lag screw hinge with a 5/8 inch solid pin and one-piece molding for wooden posts.
Pros
- 304 stainless steel with rust resistance stated
- One-piece molding with no weak weld points stated
- 5/8 inch solid pin for a firm hold on the gate
- 3 inch lag screw thread for deep anchoring into wooden posts
Cons
- No concrete post fit is stated in the listing
- No warranty term is stated
- Works with 5/8 inch screw eye hinges or post female hinges sold separately
- A pilot hole must be drilled before screwing the hinge in

Dansydaisy Square Post Hinge
A galvanized square post female hinge with a 1-1/2 inch square opening and a 5/8 inch pin hole, sold with bolts and nuts.
Pros
- Hot dipped galvanized pressed steel for long lasting outdoor use
- 1-1/2 inch by 1-1/2 inch square opening for standard square posts
- 5/8 inch pin hole for clevis pins
- Bolts and nuts sized 3/8 inch by 2-1/2 inch are included
Cons
- No concrete post fit is stated in the listing
- No warranty term is stated
- Listing asks buyers to double-check the post dimension before ordering

Insaga Chain Link Hinges
A carbon steel wall mount hinge set of 4 pairs with carriage bolts for 2-3/8 inch posts.
Pros
- Carbon steel with an E-coated finish for rust resistance
- 4 pairs in one set with carriage bolts included
- Fit stated for 2-3/8 inch outer diameter posts
- Two piece design with removable bolts stated
Cons
- No concrete post fit is stated in the listing
- No warranty term is stated
- Fit is limited to 2-3/8 inch outer diameter posts

Homydom T-Post Hinge Pins
A steel T-post hinge pin set for gates with 5/8 inch or 3/4 inch hinge eyes.
Pros
- Heavy duty steel construction
- Fits gates with 5/8 inch or 3/4 inch hinge eyes
- Gate swing of 200+ degrees stated
- Installation instruction and Allen key are included
Cons
- No concrete post fit is stated in the listing
- No warranty term is stated
- Title calls it a Target Hanger while bullets describe T-post hinge pins
- No spare parts are listed in the package contents

Adamoss T-Post Hinge Pins
A metal T-post hinge pin set for gates with 5/8 inch or 3/4 inch hinge eyes.
Pros
- Solid heavy steel construction
- Painted finish stated for rust prevention
- Fits gates with 5/8 inch or 3/4 inch hinge eyes
- Top hinge pin, bottom hinge pin, washer and locking pin included
Cons
- No concrete post fit is stated in the listing
- No warranty term is stated
- Painted finish is the only rust protection stated, with no galvanized or stainless claim
- Fit is limited to gates with 5/8 inch or 3/4 inch hinge eyes
As an Amazon Associate I earn from qualifying purchases.
Also worth comparing
TopKlik Self Closing Gate HingesCheck price on Amazon
MegaKlik Self Closing Gate HingesCheck price on Amazon
More picks to compare
WENHUALI Wall Mount Hinges2 pack, 5/8 inch pin, carbon steel with powder-coated finish for fences, barns and shedsCheck on Amazon
Wmebee Male Post Gate Hinge2 pack, galvanized steel male hinge for 2-3/8 inch posts, female pin sold separatelyCheck on Amazon
Wall Mount Gate Hinges 4 Pairs4 pairs, 5/8 inch pin, for wooden or concrete fence gates, screws includedCheck on Amazon
Wall Mount Gate Hinge 4 Pack4 pack, steel wall mount hinge, 5/8 inch pin, for wooden or concrete farm gatesCheck on Amazon
Wall Mount Gate Hinge 2 Pack2 pack, steel wall mount hinge, 5/8 inch pin, for wooden or concrete farm gatesCheck on Amazon
Spec comparison
| Gate hinge | GoatGear Score | Material | Pin | Post fit | Pack | Amazon |
|---|---|---|---|---|---|---|
| Insaga Lag Screw Hinge | 9.7/10 | Stainless steel | 5/8 inch | Wooden posts | 2 pieces | View on Amazon |
| Dansydaisy Square Post Hinge | 9.7/10 | Galvanized steel | 5/8 inch | 1-1/2 inch square posts | 2 pieces | View on Amazon |
| Insaga Chain Link Hinges | 9.6/10 | Carbon steel | Not stated | 2-3/8 inch posts | 4 pairs | View on Amazon |
| Homydom T-Post Hinge Pins | 9.6/10 | Steel | 5/8 or 3/4 inch eyes | Metal T-posts | 1 set | View on Amazon |
| Adamoss T-Post Hinge Pins | 9.6/10 | Metal | 5/8 or 3/4 inch eyes | Metal T-posts | 1 Count | View on Amazon |
These are maker ratings taken from the goat gear listings on 24 October 2026, not our own measurements.
How to choose the best gate hinges for concrete posts
Match the pin to the gate eye
Pin size decides whether a hinge works with a gate frame, so check the eye before ordering. The Insaga lag screw hinge lists a 5/8 inch solid pin, and the Dansydaisy square post hinge lists a 5/8 inch pin hole for clevis pins. T-post pins from Homydom and Adamoss fit gates with 5/8 inch or 3/4 inch hinge eyes. Where a listing leaves the pin unstated, as with the Insaga chain link hinges, do not assume a size. Finish matters beside pin size, and the choice between galvanized and stainless gate hinges comes down to which rust protection each listing states.
Match the mount to the post
Post shape decides the mount. Lag screw hinges suit wooden posts, square post hinges suit square posts, wall mount hinges suit a flat face, and T-post pins suit metal T-posts. The Dansydaisy hinge fits 1-1/2 inch square posts, the Insaga chain link hinges fit 2-3/8 inch posts, and the Insaga lag screw hinge screws into wooden posts with a 3 inch thread. None of the main listings states a concrete post fit, so look to the extra wall mount options, which name wooden or concrete fence gates and use a 5/8 inch pin. For background on setting posts, see posts set in concrete and compare with round post hinges.
| Gate hinge | Mount | Post fit | Pin |
|---|---|---|---|
| Insaga Lag Screw Hinge | Lag screw | Wooden posts | 5/8 inch |
| Dansydaisy Square Post Hinge | Surface mount | 1-1/2 inch square posts | 5/8 inch pin hole |
| Insaga Chain Link Hinges | Wall mount | 2-3/8 inch posts | Not stated |
| Homydom T-Post Hinge Pins | T-post | Metal T-posts | 5/8 inch or 3/4 inch eyes |
| Adamoss T-Post Hinge Pins | Surface mount | Metal T-posts | 5/8 inch or 3/4 inch eyes |
Count the pack before ordering
Pack contents decide how many gates one order covers, and these listings differ on that point. The Insaga lag screw hinge includes 2 pieces, the Dansydaisy hinge includes 2 pieces with bolts and nuts, and the Insaga chain link set includes 4 pairs with carriage bolts. Adamoss lists a top and bottom hinge pin with a washer and a locking pin, while Homydom lists 1 set with an installation instruction and an Allen key. Check the count against the gates on the fence line before ordering.
Finish and rust resistance
Outdoor hinges live in rain and sun, so read the stated finish closely. The Insaga lag screw hinge uses 304 stainless steel with rust resistance stated, the Dansydaisy hinge uses hot dipped galvanized pressed steel, and the Insaga chain link hinges use carbon steel with an E-coated finish. Adamoss states a painted finish for rust prevention, and Homydom states heavy duty steel that is not easy to rust or oxidize. Among the extra options, the WENHUALI wall mount hinges use carbon steel with a powder-coated finish for rust resistance.
Wall mount hinges for flat faces
Wall mount hinges fix to a flat face rather than wrapping a post, which suits gates hung on a wall, a flat post face or a frame. The Insaga chain link hinges list a wall mount with carriage bolts, and the WENHUALI extra option lists a wall mount with screws included and a 5/8 inch pin. Dansydaisy lists a surface mount, which is the same flat-face idea under a different mounting name. Check the hole count where one is given: Dansydaisy lists 2, and Adamoss lists 3.
Around the Barn
- Match the hinge eye to the pin before setup: listings here use a 5/8 inch pin or a 5/8 inch pin hole, and T-post pins fit 5/8 inch or 3/4 inch eyes.
- For square posts, use the Dansydaisy opening of 1-1/2 inch by 1-1/2 inch; for round posts, use the Insaga fit for 2-3/8 inch posts.
- Watch for a gate that drags or sags, and check that pins and bolts stay firm.
- Keep the package hardware together: the Dansydaisy set includes bolts and nuts, and the Homydom set includes an Allen key.
FAQs from goat keepers
Can these hinges mount on concrete posts?
No main listing here states a concrete post fit. Among the extra options, wall mount listings named for wooden or concrete fence gates use a 5/8 inch pin.
What pin size fits a gate with 5/8 inch hinge eyes?
The Adamoss and Homydom T-post pins fit 5/8 inch or 3/4 inch hinge eyes. The Insaga lag screw hinge lists a 5/8 inch solid pin, and the Dansydaisy hinge lists a 5/8 inch pin hole.
Which hinge fits a square post?
The Dansydaisy hinge has a 1-1/2 inch by 1-1/2 inch square opening with a 5/8 inch pin hole and bolts and nuts included.
Do any of these hinges state a warranty?
No listing here states a warranty term. Warranty therefore adds nothing to any GoatGear Score in this roundup.
How many pairs come in the Insaga chain link set?
The set includes 4 pairs with carriage bolts for 2-3/8 inch posts.
Behind the Farm Score
The GoatGear Score weighs performance, build, value, safety and warranty. For gate hinges, safety means stated rust resistance and a firm construction that holds a gate without sagging. No listing here states a warranty term, so warranty adds nothing to any score in this roundup. How we pick explains the weights.
| Product | GoatGear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Insaga Lag Screw Hinge | 9.7 | 32 | 22 | 21 | 8 | 0 |
| Dansydaisy Square Post Hinge | 9.7 | 30 | 22 | 21 | 8 | 0 |
| Insaga Chain Link Hinges | 9.6 | 30 | 21 | 21 | 8 | 0 |
| Homydom T-Post Hinge Pins | 9.6 | 29 | 21 | 20 | 7 | 0 |
| Adamoss T-Post Hinge Pins | 9.6 | 29 | 20 | 20 | 7 | 0 |
A score of 9.2 marks the weakest point total on our scale and 9.8 the strongest; totals in between are placed proportionally.
More from the barn
See every goat fencing guide and all fencing and shelter guides. Also see our round post hinges, galvanized and stainless hinges and wall mount hinges.
More picks: goat shelters, fence post drivers and gate hinge bolts.
