Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Galvanized vs Stainless Gate Hinges: Which One Should You Buy?

Galvanized vs stainless gate hinges: what the zinc coating on 4 compared listings means, where stainless fits, and how to match a hinge to a goat gate.

Galvanized vs Stainless Gate Hinges: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Freeman 9-Gauge Fencing Staples 1-3/4in Glue CollatedFreeman 9-Gauge Fencing Staples 1-3/4in Glue Collated9.7/10View on Amazon
  2. 23-1/2" Heavy Duty Gate Hinges3-1/2" Heavy Duty Gate HingesView on Amazon
  3. 3Hillman Galvanized Steel Heavy-Duty Strap Hinges for GatesHillman Galvanized Steel Heavy-Duty Strap Hinges for GatesView on Amazon
  4. 4Galvanized Bull Dog Gate HingeGalvanized Bull Dog Gate HingeView on Amazon
  5. 5Nuvo Iron TH8BLK Black Galvanized Steel 8" TeeNuvo Iron TH8BLK Black Galvanized Steel 8" TeeView on Amazon
  6. 65" Zinc Plated Gate Hinges5" Zinc Plated Gate HingesView on Amazon
  7. 7304 Stainless Steel Gate Hinges for Wooden Fences304 Stainless Steel Gate Hinges for Wooden FencesView on Amazon

The gate on the goat pen has started to drag, and the hinge pins have gone orange with rust where the rain hits them. The question behind the rust is galvanized vs stainless gate hinges: which one should you buy? For most goat gates, galvanized is the practical pick. All 4 of the hinge listings compared in this guide are galvanized steel, and the zinc coating is the rust protection the makers state. Stainless steel hinges resist corrosion without any coating, which earns them a place only where a gate sits in constant wet or the harshest corrosion, and none of the 4 listings states stainless steel.

Also worth comparing

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Galvanized vs stainless gate hinges: the short answer

Galvanized steel is steel with a zinc coating. The coating is the barrier between the steel and the weather, and all 4 of the hinge listings below describe it as their rust protection: zinc plated on the HOME MASTER T strap hinge, hot-dipped galvanized on the Plum Fittings post hinge, hot-dip galvanized on the VIVIDA chain link hinge kit, and galvanized steel on the Dailydanny J-bolt hinge. Stainless steel carries no coating; the alloy itself resists corrosion. That makes stainless the pick for a gate that never dries out, and galvanized the pick for every ordinary goat pen gate, which is why the listings you will actually shop are nearly all galvanized.

What galvanized means in these listings

The 4 listings describe the same idea in different words. The HOME MASTER listing says the steel surface is galvanized and describes the finish as zinc plated and rustproof. The Plum Fittings listing says the finish is hot-dipped galvanized to prevent rusting. The VIVIDA listing calls its finish hot-dip galvanized and claims high corrosion resistance for outdoor use. The Dailydanny listing says its hinges are made of galvanized steel for rust prevention and long outdoor use. In every case the zinc layer is what stands between the steel and the rain, and when the coating wears through, the steel underneath rusts.

4 galvanized hinges, ranked

All 4 listings state galvanized steel and none states stainless steel. They are ordered below by how complete and consistent their stated specs are, from the clearest listing to the one with conflicting numbers.

Hinge Finish stated Gate fit Pin size Pack
Dailydanny J-bolt post hinge Galvanized steel Chain link post 5/8 inch 4
VIVIDA chain link gate hinge kit Hot-dip galvanized 1-5/8 inch OD pipe 5/8 inch 2 sets
Plum Fittings post hinge Hot-dipped galvanized 3 inch frame, 2 7/8 inch OD 5/8 inch 2
HOME MASTER T strap hinge Zinc plated, galvanized Fences, shed and barn doors Not stated 6

Dailydanny J-bolt post hinge

The Dailydanny listing is the clearest of the 4. It states a 5/8 inch hinge pin, an 8 inch overall bolt length with a 9.7 inch thread length, and item dimensions of 10 inch by 1 inch. The pack holds 4 pieces, and washers and nuts are included. The hinge is adjustable even after the gate is installed, which helps when a gate settles and starts to drag. The material is galvanized steel, and the listing describes it as rust prevention for outdoor use.

VIVIDA chain link gate hinge kit

The VIVIDA listing is a complete kit for 1-5/8 inch outside diameter pipe. The male hinge suits the post and the female hinge suits the frame, and the pin diameter is 5/8 inch. The pack holds 2 sets: 2 male hinges and 2 female hinges, with bolts and nuts included. The finish is hot-dip galvanized, which the listing describes as high corrosion resistance for outdoor environments. The item dimensions are 1.8 inch by 6.9 inch, and the hole count is 4.

Plum Fittings chain link fence post hinge

The Plum Fittings hinge fits a 3 inch gate frame (2 7/8 inch outside diameter) with a 5/8 inch pin. The pack holds 2 hinges, and 3/8 inch by 3 inch carriage bolts and nuts are included. The finish is hot-dipped galvanized to prevent rusting. The listing states fewer dimensions than the Dailydanny and VIVIDA listings above: 8 inch by 3 inch in the spec table, with no overall length stated, so measure the post before ordering.

HOME MASTER T strap hinge

The HOME MASTER listing is the only strap hinge of the 4, and it is also the listing with the most conflicts. The title and bullets say 3-1/2 inch and a 6 pack, while the spec table says 4.5 inch and a unit count of 1 piece. Trust the title and bullets: a 6 pack of 3-1/2 inch T strap hinges with 54 mounting screws. Each hinge carries up to 50 pounds, the finish is zinc plated steel described as galvanized and rustproof, and the color is black. The offset screw holes are meant to prevent wood splitting, and the hinge suits fences, sheds, storage sheds, barns and garages.

Matching the hinge to the gate

Start with the gate frame, not the hinge. 3 of the 4 listings are chain link hinges with a 5/8 inch pin: measure the outside diameter of the post or frame and pick the hinge that names it, 1-5/8 inch on the VIVIDA kit or 3 inch (2 7/8 inch OD) on the Plum Fittings hinge. The Dailydanny J-bolt hinge adjusts after the install, which suits a post that has shifted. For a wooden gate or a shed door, the strap style of the HOME MASTER hinge spreads the load across the boards, and each hinge states a 50 pound capacity.

Count the pack too. The HOME MASTER ships 6 hinges with 54 screws, the Dailydanny ships 4, the Plum Fittings ships 2, and the VIVIDA ships 2 sets of male and female hinges. A gate that swings daily wants a hinge with a stated pin size and stated hardware; all 4 listings include the bolts, nuts or screws needed for the install. For more hinge styles, the steel gate hinges roundup compares 4 by spec, and weld-on vs bolt-on gate hinges covers the mounting choice. Wooden gates have their own roundup at gate hinges for wooden gates.

Read the listing twice

Hinge listings contradict themselves, and the conflicting numbers are usually the ones you need for the install:

  • HOME MASTER: 3-1/2 inch in the title and bullets against 4.5 inch in the spec table, and a 6 pack in the title against a unit count of 1 piece in the spec table.
  • Plum Fittings: the spec table gives 8 inch by 3 inch item dimensions but states no overall hinge length, so the 3 inch (2 7/8 inch OD) frame size in the title is the number to match.
  • VIVIDA: 1.8 inch by 6.9 inch in the spec table describes the hinge leaf, while the 1-5/8 inch pipe size is the number that decides the fit.
  • Dailydanny: the 10 inch by 1 inch item dimensions sit next to an 8 inch overall length in the bullets; use the overall length when checking post clearance.

Measure the post or frame before ordering and allow for the larger figure.

What this guide does not cover

This guide covers hinge hardware only. It does not recommend a stainless steel hinge, because none of the 4 listings compared states stainless steel. It does not cover gate frames, posts or latches, and it does not cover how to hang a gate or any goat health question.

FAQs from goat keepers

Should a goat gate use galvanized or stainless hinges?

Galvanized for most goat gates. All 4 hinge listings compared here are galvanized steel, and the zinc coating is the rust protection the makers state for outdoor use. Stainless steel suits a gate that sits in constant wet or the harshest corrosion, where a zinc coating wears through soonest.

What size hinge fits a chain link goat gate?

Measure the outside diameter of the post or frame. The VIVIDA kit fits 1-5/8 inch OD pipe, the Plum Fittings hinge fits a 3 inch frame (2 7/8 inch OD), and each uses a 5/8 inch pin, the same pin size the Dailydanny J-bolt hinge states.

Do gate hinges come with bolts and screws?

These 4 do. The HOME MASTER 6 pack includes 54 mounting screws, the Plum Fittings 2 pack includes 3/8 inch by 3 inch carriage bolts and nuts, the VIVIDA kit includes bolts and nuts for its 2 sets, and the Dailydanny 4 pack includes washers and nuts.

How much weight can a gate hinge hold?

Only the HOME MASTER listing states it: each HOME MASTER T strap hinge carries up to 50 pounds. The other 3 listings state no weight capacity, so match the hinge count and pin size to the gate and read the listing before ordering.

More from the barn

See every goat fencing guide and all fencing and shelter guides.

More picks: steel gate hinges, gate hinges for wooden gates, gate hinges for goat pens and weld-on vs bolt-on gate hinges.