
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Best OverallEvylnorrs 9-Inch 48-Inch Auger9.7/10View on Amazon - 2
Best Wear Parts KitVenussar Spiral Point Kit9.6/10View on Amazon - 3
Best 4-Pack EdgesHicarer 4-Pack Cutting Edges9.6/10View on Amazon - 4
Best Small BitTHUNDERBAY 3-Inch Auger Bit9.5/10View on Amazon - 5
Best Replacement Edgesluxlead 4-Pack Cutting Edges9.6/10View on Amazon
The morning milking is done, the hay is down, and the fence line still needs new posts, so the best three point tractor auger is the tool that turns that chore into an afternoon of steady digging. This guide compares auger bits and cutting edge kits by diameter, length, hitch fit, cutting edges and what comes in the box, using only what each listing publishes.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Quick picks
Best Overall Evylnorrs 9-Inch 48-Inch Auger: 9 inch bit, 48 inch depth, Cat 1 and 2 hitch, 4 carbide edges Check price on Amazon
Best Wear Parts Kit Venussar Spiral Point Kit: Spiral point plus 2 cutting edges for 6 to 24 inch augers Check price on Amazon
Best 4-Pack Edges Hicarer 4-Pack Cutting Edges: 4 carbon steel edges with screws, 3.15 inch cutting edge Check price on Amazon
Best Small Bit THUNDERBAY 3-Inch Auger Bit: 3 inch bit, 36 inch length, fishtail point, 1.0 pound Check price on Amazon
Best Replacement Edges luxlead 4-Pack Cutting Edges: 4 carbon steel edges for 6 and 9 inch augers Check price on Amazon
The gear we picked
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | Evylnorrs 9-Inch 48-Inch Auger | 9.7/10 | Buy on Amazon |
| 2 | Venussar Spiral Point Kit | 9.6/10 | Buy on Amazon |
| 3 | Hicarer 4-Pack Cutting Edges | 9.6/10 | Buy on Amazon |
| 4 | luxlead 4-Pack Cutting Edges | 9.6/10 | Buy on Amazon |
| 5 | THUNDERBAY 3-Inch Auger Bit | 9.5/10 | Buy on Amazon |

Evylnorrs 9-Inch 48-Inch Auger
A 9-inch, 48-inch 3-point tractor auger with a reinforced collar for Category 1 and 2 hitches.
Pros
- 9-inch diameter with a full 48-inch cutting depth
- Fits Category 1 and Category 2 3-point hitches
- 4 bolt-on carbide cutting edges with a replaceable spiral point
- Reinforced collar held by two 1/2-inch bolts set 90 degrees apart
Cons
- 9-inch holes only, so larger posts need a wider bit
- Needs a Category 1 or 2 hitch, so it does not fit other hitch types
- No warranty term is stated
- The 2-inch round drive must match the digger, or it will not mount

Venussar Spiral Point Kit
A bolt-on spiral point with 2 cutting edges for heavy-duty 3-point augers with a 2-inch tube.
Pros
- Spiral point plus 2 cutting edges in one pack
- Fits 6 to 24 inch augers with a 2-inch ID tube
- Heavy-duty carbon steel with a treated, rust-proof surface
- Screws included for mounting
Cons
- Only fits augers with a bolt-on tip receiver
- Covers the tip and edges only, not a full auger bit
- No warranty term is stated
- Sized for heavy-duty augers, so it does not suit light garden augers

Hicarer 4-Pack Cutting Edges
A 4-pack of carbon steel cutting edges with screws for heavy-duty 3-point post hole diggers.
Pros
- 4 cutting edges with matched screws in the pack
- Carbon steel with a treated surface that resists rust
- Each edge measures 3.15 by 1.97 by 0.67 inches
- 2 edges replace 1 auger drill bit
Cons
- Edges only, so the auger bit and spiral point are not included
- Square hole pattern must match the auger head
- The 3.15 inch edge suits heavy-duty augers, not small garden bits
- No spiral point is included in the pack

luxlead 4-Pack Cutting Edges
A 4-pack of carbon steel cutting edges with screws for 6-inch and 9-inch tractor augers.
Pros
- 4 cutting edges with matching screws
- Carbon steel with a black coating against wear and rust
- Fits flat, 1-hole blades on 6-inch and 9-inch tractor augers
- Each edge measures about 3.5 by 1.59 inches
Cons
- Edges only, not a complete auger bit
- Not suitable for Danuser skid steer augers
- Flat, 1-hole blades only, so curved blades and multi-hole patterns will not fit
- No spiral point is included in the pack

THUNDERBAY 3-Inch Auger Bit
A 3-inch, 36-inch earth auger bit with a fishtail point for handheld power heads.
Pros
- 3-inch drilling diameter for decks, mailboxes and fences
- 36-inch length with a hardened centering point
- Replaceable cutting blade
- Rugged welded steel with a heavy powdercoat finish
Cons
- Fits 7/8-inch drive power heads, not a 3-point tractor hitch
- 3-inch holes only, so fence posts need a wider bit
- Single bit, so spares need another order
- No spare blade is included
As an Amazon Associate I earn from qualifying purchases.
More picks to compare
Evylnorrs 12-Inch 48-Inch AugerA 12-inch bit with a 48-inch depth for larger fence posts and footings.Check on Amazon
Evylnorrs 6-Inch 48-Inch AugerA 6-inch bit with a 48-inch depth for standard posts and landscaping.Check on Amazon
Tool Tuff Model 400 DiggerA 3-point post hole digger with a 12-inch auger for compact tractors.Check on Amazon
Cutetool 4-Pack Cutting EdgesCutting edges with bolts and nylon lock nuts for 6-inch and 9-inch augers.Check on Amazon- Heavy Duty 6-Inch Auger BitA 6-inch by 48-inch post hole digger auger bit for 3-point attachment.Check on Amazon
Spec comparison
| Auger | GoatGear Score | Size | Fit | Material | In the box | Amazon |
|---|---|---|---|---|---|---|
| Evylnorrs 9-Inch 48-Inch Auger | 9.7/10 | 9 x 48 in | Cat 1/2, 2 in round drive | Steel flighting | Auger, spiral point, 4 edges | View on Amazon |
| Venussar Spiral Point Kit | 9.6/10 | 5 x 5 x 10 in | 6-24 in augers, 2 in ID tube | Carbon steel | 1 point, 2 edges, screws | View on Amazon |
| Hicarer 4-Pack Cutting Edges | 9.6/10 | 3.15 x 1.97 x 0.67 in | Most heavy-duty 3-point augers | Carbon steel | 4 edges, screws | View on Amazon |
| luxlead 4-Pack Cutting Edges | 9.6/10 | 3.5 x 1.59 in, 0.4-0.5 in thick | 6 and 9 in augers, flat 1-hole blades | Carbon steel | 4 edges, screws | View on Amazon |
| THUNDERBAY 3-Inch Auger Bit | 9.5/10 | 3 x 36 in | 7/8 in drive power heads | Hardened steel | 1 bit | View on Amazon |
Sizes and capacities are the manufacturer’s numbers as each listing states them, pulled 22 November 2026.
How to choose the best three point tractor auger
Diameter and depth
Diameter sets the hole, and length sets the depth. The Evylnorrs auger bores 9-inch holes to a full 48-inch depth for standard fence posts, tree planting and footings, while the THUNDERBAY bit bores 3-inch holes to 36 inches for decks, mailboxes and small planting jobs. The Venussar kit fits augers from 6 to 24 inches, so it suits a wider bit already on the tractor. Pick the diameter for the post going in, then check the depth against the hole the job needs.
| Auger | Diameter | Length |
|---|---|---|
| Evylnorrs 9-Inch 48-Inch Auger | 9 in | 48 in |
| THUNDERBAY 3-Inch Auger Bit | 3 in | 36 in |
| Venussar Spiral Point Kit | Fits 6-24 in | 10 in |
Hitch fit and drive
The Evylnorrs auger fits Category 1 and Category 2 hitches with a 2-inch round drive, so it mounts on the common 3-point post hole diggers. The Venussar spiral point fits augers with a 2-inch ID tube and a bolt-on tip receiver. The THUNDERBAY bit is different: it takes a 7/8-inch drive on Thunderbay, Earthquake, Dolmar, Echo and Maruyama power heads, so it does not mount on a 3-point hitch at all. Check the hitch category and the drive size on the digger before ordering. A quick hitch helps when swapping between implements; see the best quick hitch for tractor guide and the best three point hitch receiver for tractor guide.
Cutting edges and spares
Edges and points wear first, so the spares in the box matter. The Evylnorrs auger carries 4 bolt-on carbide cutting edges and a replaceable spiral point. The Venussar kit holds 1 spiral point and 2 cutting edges with screws, and both 4-packs hold 4 edges with screws, with 2 edges replacing 1 auger drill bit. The luxlead edges fit flat, 1-hole blades on 6-inch and 9-inch augers, while the Hicarer edges fit most heavy-duty 3-point augers. Keep a spare set in the barn and match the edge size to the auger before ordering.
Around the Barn
- Check the two 1/2-inch collar bolts on the Evylnorrs auger before the first hole of the day.
- Lift the auger halfway in clay or loam to clear mud from the flighting.
- Keep spare cutting edges and screws in the barn, since 2 edges replace 1 drill bit.
- Give the 48-inch bits a tall spot in the barn, clear of walkways.
FAQs from goat keepers
What size three point tractor auger do I need for fence posts?
The Evylnorrs auger here bores 9-inch holes to a 48-inch depth for standard fence posts. The THUNDERBAY bit bores 3-inch holes to 36 inches for small jobs like mailboxes.
Will these augers fit a Category 1 tractor?
The Evylnorrs 9-inch auger fits Category 1 and Category 2 hitches with a 2-inch round drive. Check the hitch category and drive size on the digger before ordering.
Do the cutting edges fit my auger?
The Hicarer edges fit most heavy-duty 3-point augers, and the luxlead edges fit flat, 1-hole blades on 6-inch and 9-inch augers. The Venussar spiral point fits 6 to 24 inch augers with a 2-inch ID tube and bolt-on tip receiver.
How many cutting edges come in a pack?
Both the Hicarer and luxlead packs hold 4 cutting edges with screws, and 2 edges replace 1 auger drill bit. The Venussar kit holds 1 spiral point and 2 cutting edges with screws.
What drive does the THUNDERBAY bit use?
The THUNDERBAY bit uses a 7/8-inch drive for Thunderbay, Earthquake, Dolmar, Echo and Maruyama power heads. It does not fit a 3-point tractor hitch.
Behind the Farm Score
The GoatGear Score weighs performance, build, value, safety and warranty. For three point augers, safety means stated shields, shear protection or certifications, and none of the five state any. None of the five state a warranty term. How we pick explains the weights.
| Product | GoatGear Score | Perf. /35 | Build /25 | Value /25 | Safety /10 | Warranty /5 |
|---|---|---|---|---|---|---|
| Evylnorrs 9-Inch 48-Inch Auger | 9.7 | 32 | 22 | 21 | n/a | 0 |
| Venussar Spiral Point Kit | 9.6 | 29 | 21 | 20 | n/a | 0 |
| Hicarer 4-Pack Cutting Edges | 9.6 | 28 | 21 | 20 | n/a | 0 |
| luxlead 4-Pack Cutting Edges | 9.6 | 28 | 20 | 20 | n/a | 0 |
| THUNDERBAY 3-Inch Auger Bit | 9.5 | 23 | 20 | 20 | n/a | 0 |
Our scores stay inside 9.2 and 9.8, with point totals stretched across that gap evenly, so the item with more points shows the bigger score. Safety is scored for electric gear and for listings that state safety features; everything else is scored over the 90 points that remain.
More from the barn
See every tractor attachment guide and all tractor and farm implement guides. Also see what size auger for fence posts, post hole auger tips, best gas powered auger for post holes and post hole digger vs auger.
More picks: browse tractor implements, tractor attachments and box blades.
