
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
NEO-TEC 72CC Auger 8 and 12 in9.6/10View on Amazon - 2
Baotree 72cc Auger 6 and 8 in9.6/10View on Amazon - 3
NEO-TEC 63CC Auger 8in9.5/10View on Amazon - 4
Seymour S500 IWAN Auger9.4/10View on Amazon
A fence post set in a hole too narrow for the post wobbles, and picking what size auger for fence posts to use is the step that decides whether the post stands straight. This guide covers the choice by post size, hole depth and soil, with gas and manual augers compared. The gear below covers the digging, from a manual auger to gas units with wide bits.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | NEO-TEC 72CC Auger 8 and 12 in | 9.6/10 | Buy on Amazon |
| 2 | Baotree 72cc Auger 6 and 8 in | 9.6/10 | Buy on Amazon |
| 3 | NEO-TEC 63CC Auger 8in | 9.5/10 | Buy on Amazon |
| 4 | Seymour S500 IWAN Auger | 9.4/10 | Buy on Amazon |

NEO-TEC 72CC Auger 8 and 12 in
A 72cc gas auger with 8 inch and 12 inch bits plus two extension bars for fence posts, deck footings and frozen ground.
Pros
- 8 inch and 12 inch bits cover standard and large posts
- Two 8 inch extensions add 16 inches of depth
- 72cc 2-stroke engine for clay and frozen ground
- Side-mounted throttle with safety lock
Cons
- No warranty term is stated
- Not CARB certified, so not for sale in California
- Runs on a 25:1 gas and oil mix
- At 17.6 lb it needs two hands to carry

Baotree 72cc Auger 6 and 8 in
A 72cc gas auger with 6 inch and 8 inch bits and two extension rods for fence posts, trees and deck footings.
Pros
- 6 inch and 8 inch bits with two extension rods
- Digs to a depth of over 3 feet
- Reinforced steel bit and durable gearbox
- Auger brake and quick-release throttle
Cons
- No warranty term is stated
- No weight figure is stated
- Runs on a 25:1 gas and oil mix
- Two bits only, with no 12 inch bit

NEO-TEC 63CC Auger 8in
A 63cc gas auger with an 8 inch bit and an 8 inch extension for fence posts, deck footings and ice.
Pros
- 8 inch bit plus an 8 inch extension bar
- 63cc 2-stroke engine for soil, clay and frozen ground
- Foam-padded anti-vibration grips
- Side-mounted throttle with safety lock
Cons
- No warranty term is stated
- One bit only, with no 6 inch or 12 inch bit
- Runs on a 25:1 gas and oil mix
- The 63cc engine is smaller than the 72cc units

Seymour S500 IWAN Auger
A manual 6 inch auger with a steel blade, iron yoke and hardwood handle for general purpose use in a variety of soils.
Pros
- No fuel, mix or engine to maintain
- Steel blade riveted to a tough iron yoke
- Steel shaft with a welded steel T-handle
- Made in USA and weighs 7.4 lb
Cons
- No warranty term is stated
- Manual digging only, with no engine
- One 6 inch size only
- No extension bar is included
As an Amazon Associate I earn from qualifying purchases.
Also worth comparing
WORKIT 72CC Post Hole DiggerCheck price on Amazon
Electric Post Hole DiggerCheck price on Amazon
Auger Point to Fit 9" and 12" Post Hole Diggers 1-1/4" ThreadCheck price on Amazon
XtremepowerUS 1500W Electric Post Hole Digger Earth Auger DigCheck price on Amazon
DC HOUSE 52cc 1800W Gas Powered Earth Auger EPA CertifiedCheck price on Amazon
Leriton Hand Auger Post Hole Digger 6"x 46" with Non-SlipCheck price on Amazon
What size auger for fence posts: the short answer
Match the bit to the post and leave room for concrete around it. The listings here give bits of 6 inches, 8 inches and 12 inches: the 6 inch bit suits standard posts and signs, the 8 inch bit suits standard fence posts, and the 12 inch bit suits large posts and deck footings. Depth matters too: the Baotree digs to over 3 feet with its extensions, and the NEO-TEC 72CC (on Amazon) adds 16 inches of depth with two 8 inch extension bars.
The gear for the job
The bits, extensions and engines below cover the sizing choice, the depth and the soil.
Match the bit to the post
Post size decides the bit. The Seymour auger (on Amazon) is 6 inch diameter for general purpose use, and the NEO-TEC 72CC includes an 8 inch bit for standard fence posts and signs and a 12 inch bit for large posts, deck footings and deep foundation holes. The Baotree includes 6 inch and 8 inch bits, and the NEO-TEC 63CC (on Amazon) includes one 8 inch bit. If the post is large or the hole is a deck footing, the 12 inch bit is the pick; for a standard fence post, the 8 inch bit is the pick. See the best post hole diggers for rocky soil if the ground is hard as well as deep.
Depth and extensions
Depth comes from the bit plus the extension bars. The Baotree digs to a depth of over 3 feet with its two extension rods. The NEO-TEC 72CC includes two 8 inch extension bars, 16 inches in total, and the NEO-TEC 63CC includes one 8 inch extension bar. Extensions let you drill deeper without bending, which the NEO-TEC listings both state. Measure the depth you need before you buy, and check that the extensions in the box reach it.
Gas or manual
Gas augers suit long fence lines and hard ground. The NEO-TEC 72CC and the Baotree both run a 72cc 2-stroke engine, and the NEO-TEC 63CC runs a 63cc 2-stroke engine. Each of the gas units runs on a 25:1 gas and oil mix. The Seymour manual auger needs no fuel or mix and weighs 7.4 lb. Gas units are heavier: the NEO-TEC 72CC weighs 17.6 lb and the NEO-TEC 63CC powerhead weighs about 16.3 lb. The Baotree listing says to keep bystanders 15 feet away and never to run the auger indoors.
Read the listing twice
The NEO-TEC 63CC listing gives the powerhead weight as about 16.3 lb in the bullets while the spec table lists 31.85 lb, so the two figures cover different parts of the kit. The NEO-TEC 72CC listing states the auger is not CARB certified and cannot be sold or shipped to California, so check your state before you buy. The NEO-TEC 72CC title lists 8 inch and 12 inch bits, and the bullets agree. The Seymour listing gives a 6 inch point spread as well as a 6 inch diameter, so the two figures match.
FAQs from goat keepers
What size auger do I need for a standard fence post?
The NEO-TEC 72CC lists its 8 inch bit for standard fence posts and signs. The Baotree and the NEO-TEC 63CC also list 8 inch bits, and the Seymour lists a 6 inch diameter for general purpose use.
What size auger do I need for a deck footing?
The NEO-TEC 72CC lists its 12 inch bit for large posts, deck footings and deep foundation holes. The Baotree lists 6 inch and 8 inch bits and a depth of over 3 feet with its extensions.
How deep can a post hole auger dig?
It depends on the extensions. The Baotree digs to a depth of over 3 feet with its two extension rods, and the NEO-TEC 72CC adds 16 inches of depth with two 8 inch extension bars.
Do I need a gas auger or a manual auger?
A gas auger suits a long fence line or hard ground: the NEO-TEC 72CC and the Baotree both run a 72cc 2-stroke engine. A manual auger suits a small job: the Seymour weighs 7.4 lb and needs no fuel or mix.
Can I use a post hole auger on frozen ground?
The NEO-TEC 72CC lists frozen ground among its uses, and the NEO-TEC 63CC lists frozen ground and ice. The Seymour manual auger lists general purpose use in a variety of soils.
More from the barn
See every goat fencing guide and all fencing and shelter guides.
More picks: best post hole diggers for rocky soil, best post hole diggers for compact tractors, best fence chargers for the money and best fence chargers for large pastures.
