
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
FOREHOGAR Fence Post Driver with Handle 12LB9.7/10View on Amazon - 2
Earthquake E43 1-Person Earth Auger Powerhead9.6/10View on Amazon - 3
Insaga Enhance Fence Post Driver with Anti-Slip Handles TView on Amazon - 4
Insaga Enhance T-Post DriverView on Amazon - 5
Insaga Enhance Post Driver with Anti-Slip Handles 16LB T PostView on Amazon - 6
Fence Post DriverView on Amazon - 7
2200W Electric T Post Driver with 2 SleevesView on Amazon - 8
T Post DriverView on Amazon
A fence post driver vs auger choice comes down to the post: a driver pounds T-posts and U-posts straight into the ground with a sliding weight, while an auger drills a hole first for posts that need setting in concrete or for ground too hard to drive. For goat fencing, which mostly uses steel T-posts, the driver is the usual tool; the auger suits wooden corner and gate posts set in concrete, or rocky ground where driving fails. Every number below comes from an Amazon listing for a post driver, and we point out where those listings contradict themselves.
Also worth comparing
Insaga Enhance Fence Post Driver with Anti-Slip Handles TCheck price on Amazon
Insaga Enhance T-Post DriverCheck price on Amazon
Insaga Enhance Post Driver with Anti-Slip Handles 16LB T PostCheck price on Amazon
Fence Post DriverCheck price on Amazon
2200W Electric T Post Driver with 2 SleevesCheck price on Amazon
T Post DriverCheck price on Amazon
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate we earn from qualifying purchases. Affiliate disclosure.
Fence post driver vs auger: the short answer
Pick the driver for steel T-posts and U-posts: slide it over the post, lift and drop, and the weight does the work. The listings show manual drivers from 8 to 20 pounds, with the MTB Supply at 18 pounds and 23.6 inches overall, and the EUIJOIP at 19 pounds with a 16.5-inch body that extends to 32 inches. Pick the auger when the post must sit in a drilled hole, such as a wooden corner post set in concrete, or when rocks stop a driver. The fence post driver vs auger question comes up for every new paddock, so match the tool to the post before you buy.
What a post driver does
A manual post driver is a heavy steel tube, closed at the top, that slides over the post; you lift it and drop it, and the falling weight drives the post in. Two side handles give the lift-and-drop motion control, and the closed cap spreads the impact across the post top instead of mushrooming it. The MTB Supply driver weighs 18 pounds with a 2.59-inch inside diameter and a black powder coat against rust. The Insaga models run 17 inches tall with 4.7-inch or 6-inch inside diameters. The VASGOR, FOREHOGAR red and EUIJOIP fit 2.7-inch posts, while the FOREHOGAR black fits 3.7 inches for posts up to 3.5 inches. Listed weights run from 8 pounds at VASGOR, which also offers 10, 12 and 15-pound options, to 20 pounds at Insaga, with 12-pound models from Swellisher and FOREHOGAR in the middle. For big jobs, the XtremepowerUS gas-powered driver runs a 38cc 4-stroke engine at up to 6500 rpm and 1.3 hp, weighing 67 pounds with a 60-day manufacturer warranty.
What an auger does
An auger drills a cylindrical hole: you set the post in the hole, backfill or pour concrete, and the post stands plumb. No auger listings were in the data for this guide, so there are no listed figures here. Use an auger for wooden corner and gate posts that need concrete footings, or where rocks stop a driver cold. An auger also helps when the post must be exactly plumb and at an exact depth, since you control the hole rather than the pounding.
Driver vs auger compared
| Post driver | Auger | |
|---|---|---|
| Method | Pounds the post in | Drills a hole first |
| Best for | T-posts, U-posts | Wooden posts in concrete |
| Listed weights | 8 to 20 pounds manual; 67 pounds gas | Not stated |
| Crew | One person per the FOREHOGAR listing | Not stated |
| Post sizes | 2.7 to 6 inch inside diameters listed | Not stated |
Manual vs gas-powered drivers
Manual drivers trade arm power for simplicity: no fuel, no engine, nothing to maintain, and weights from 8 to 20 pounds that one person can lift all day. The EUIJOIP adds flexibility with a 16.5-inch body that extends to 32 inches and 10.4-inch dual handles for taller users and taller posts. The XtremepowerUS gas driver goes the other way, with a 38cc 4-stroke engine delivering 1.3 hp at 6500 rpm for T-posts, ground rods and steel stakes, plus a wheeled carrying case; at 67 pounds it is a two-stage lift onto the post, and the listing gives it a 60-day manufacturer warranty. Choose manual for typical goat paddocks and gas when the post count or the ground demands it.
Picking the right driver weight
Heavier drivers hit harder with less lifting: the 18-pound MTB Supply and 19-pound EUIJOIP suit long fence lines, while the 8-pound VASGOR offers control for short runs. The VASGOR listing offers 8, 10, 12 and 15-pound options so you can match the weight to the soil, and the 12-pound Swellisher and FOREHOGAR sit in the middle for all-round use. For hard ground, the 38cc gas XtremepowerUS replaces arm power with engine power at 1.3 hp and 6500 rpm. Whatever the weight, check the inside diameter against your posts: 2.7 inches fits standard T-posts, 3.7 inches fits posts up to 3.5 inches, and the 6-inch Insaga fits much larger posts.
Watch for listing contradictions
Read the listings twice before ordering. The Insaga title stating 9LB shows 16LB in the bullets and 11.44 pounds in the spec table. The Insaga 20LB title and bullets list 25.9 pounds in the spec table. The VASGOR 8 LBS title lists 9.2 pounds in the spec table. The FOREHOGAR 17LB title lists 16.8 pounds, and the 12LB title lists 11.8 pounds. Trust the title and bullets over the spec table, and confirm the inside diameter, since a driver that does not fit the post is useless.
In the Goat Yard
- Check the inside diameter against your posts before ordering.
- Let the driver’s weight do the work instead of forcing it down.
- Wear gloves and eye protection when driving posts.
- Keep helpers clear while the driver is moving.
FAQs from goat keepers
Can a post driver set wooden posts?
Yes, per the listings: the Insaga drivers suit wooden, metal and U-posts, and the Swellisher closed-end design spreads the impact to reduce splitting on wooden posts.
What inside diameter fits a T-post?
The 2.7-inch drivers from VASGOR, FOREHOGAR and EUIJOIP fit standard T-posts. Check your post diameter before ordering, as the EUIJOIP listing advises.
Driver or auger for a gate post?
A gate post carries hinges and swinging weight, so it usually needs a drilled hole and a concrete footing; use the auger there and the driver for the line posts.
More from the barn
See every fence post driver guide and all goat fencing guides.
More picks: electric fence chargers, fence insulators and post driver guides.
