Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Best Tractor Bucket Hooks with Backer Plate (2026): 5 Compared

Five Grade 70 tractor bucket hooks with backer plates compared by working load limit, break strength, plate size and included hardware.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

Best Tractor Bucket Hooks with Backer Plate (2026): 5 Compared
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1AUTMATCH 3/8in Grab HookBest OverallAUTMATCH 3/8in Grab Hook9.7/10View on Amazon
  2. 2AMBULL Tie Down Ring HookBest Tie Down RingAMBULL Tie Down Ring Hook9.6/10View on Amazon
  3. 3AMBULL Orange Grab HookBest Compact PlateAMBULL Orange Grab Hook9.6/10View on Amazon
  4. 4VIAGL 3/8in Grab HookBest for Wet WeatherVIAGL 3/8in Grab Hook9.5/10View on Amazon
  5. 5Robbor 3/8in Grab HookBest for Light LoadsRobbor 3/8in Grab Hook9.5/10View on Amazon

Hay on the ground, a chain that will not stay put, and a load that needs moving before the rain comes: that is the morning the best tractor bucket hooks with backer plate earn their keep. We compared five Grade 70 forged steel hooks by working load limit, break strength, backer plate size, hardware and finish. Every hook here is a 3/8 inch bolt-on mount with a backer plate, so the choice comes down to its rated load and what rides on the plate with it.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick picks

  • AUTMATCH 3/8in Grab Hook
    Best Overall AUTMATCH 3/8in Grab Hook: 9,000 lb WLL, 18,000 lb break strength, rubber pads Check price on Amazon
  • AMBULL Tie Down Ring Hook
    Best Tie Down Ring AMBULL Tie Down Ring Hook: Hook and D-ring on one 8 by 4.25 inch plate Check price on Amazon
  • AMBULL Orange Grab Hook
    Best Compact Plate AMBULL Orange Grab Hook: 3.25 by 4.25 inch plate with Grade 10.9 bolts Check price on Amazon
  • VIAGL 3/8in Grab Hook
    Best for Wet Weather VIAGL 3/8in Grab Hook: Galvanized coating stands up to rain and snow Check price on Amazon
  • Robbor 3/8in Grab Hook
    Best for Light Loads Robbor 3/8in Grab Hook: 4,700 lb WLL on a 1/4 inch thick plate Check price on Amazon

The gear we picked

AUTMATCH 3/8in Grab Hook

AUTMATCH 3/8in Grab Hook

AUTMATCH9.7/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A Grade 70 3/8 inch grab hook rated at 9,000 lb working load limit with an 18,000 lb break strength, a backer plate, rubber pads and a full hardware set.

Pros

  • 9,000 lb working load limit, the highest stated here
  • 18,000 lb break strength, the highest stated here
  • Rubber pads protect the bucket paint
  • Four Grade 10.9 flange bolts with washers, hex nuts and lock washers

Cons

  • 6.4 lb stated weight is heavier than the 1.0 lb stated for the VIAGL and Robbor hooks
  • No warranty term is stated
  • No backer plate dimensions are stated
  • Four bolts plus washers, hex nuts, spring lock washers and self-locking nuts mean more small parts to keep track of
AMBULL Tie Down Ring Hook

AMBULL Tie Down Ring Hook

AMBULL9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A Grade 70 3/8 inch grab hook with a tie down ring on one 8 by 4.25 inch backer plate, rated at 7,500 lb working load limit.

Pros

  • Hook and D-ring on one plate for tie-down and towing
  • Grade 70 forged steel rated at 7,500 lb working load limit
  • 15,000 lb break strength
  • Galvanized and powder coated against rust and corrosion

Cons

  • 7,500 lb working load limit is below the 9,000 lb limit of the AUTMATCH
  • No item weight is stated
  • The 8 by 4.25 inch plate is the widest here, so it needs the most flat bucket wall to sit on
  • No rubber pad is stated to protect the bucket paint
AMBULL Orange Grab Hook

AMBULL Orange Grab Hook

AMBULL9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A Grade 70 3/8 inch grab hook rated at 7,500 lb working load limit with a 15,000 lb break strength and a 3.25 by 4.25 inch backer plate.

Pros

  • Grade 70 forged steel rated at 7,500 lb working load limit
  • 15,000 lb break strength
  • Galvanized and powder coated against rust and corrosion
  • 1/2 inch Grade 10.9 bolts and lock nut included

Cons

  • 7,500 lb working load limit is below the 9,000 lb limit of the AUTMATCH
  • No warranty term is stated
  • 3.25 by 4.25 inch plate is smaller than the 8 by 4.25 inch plate of the tie down model
  • No rubber pad is stated to protect the bucket paint
VIAGL 3/8in Grab Hook

VIAGL 3/8in Grab Hook

VIAGL9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A Grade 70 3/8 inch grab hook rated at 6,600 lb working load limit with a 15,400 lb break strength and a backer plate.

Pros

  • 6,600 lb working load limit with 15,400 lb break strength
  • Galvanized and powder coated against rust and corrosion
  • Grade 8 galvanized bolts with washers and nylon lock nut included
  • Backer plate and all installation hardware included

Cons

  • 6,600 lb working load limit is below the 7,500 lb limit of the AMBULL hooks
  • Grade 8 bolts are a lower grade than the Grade 10.9 bolts of the AMBULL and AUTMATCH hooks
  • No backer plate dimensions are stated
  • 15,400 lb break strength is below the 18,000 lb break strength of the AUTMATCH
Robbor 3/8in Grab Hook

Robbor 3/8in Grab Hook

Robbor9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A Grade 70 3/8 inch grab hook rated at 4,700 lb working load limit, welded on a 1/4 inch thick steel plate with a backer plate.

Pros

  • Grade 70 forged steel rated at 4,700 lb working load limit
  • Welded on a 1/4 inch thick steel plate
  • Zinc chromate plated for weather protection
  • 1/2 inch Grade 8 bolts with washers and nylon lock nut included

Cons

  • 4,700 lb working load limit is the lowest stated here
  • No break strength is stated
  • No product dimensions are stated
  • Zinc chromate finish only, while the AMBULL hooks add galvanized and powder coating

As an Amazon Associate I earn from qualifying purchases.


Also worth comparing

More picks to compare

  • AMBULL Black Grab HookAMBULL Black Grab HookSame 7,500 lb WLL and 15,000 lb break strength as the orange hook, in black with a 3.25 by 4.25 inch plate.Check on Amazon
  • ONECHOI Clevis Mount HookBolt-on clevis mount with a 1/2 inch shackle and 5/16 inch G70 grab hooks with a backer plate.Check on Amazon
  • Green G70 Grab Hooks 2-PackTwo-pack of G70 forged steel 3/8 inch bolt-on tow hooks in green with a backer plate.Check on Amazon
  • Grab Hooks with Tie Down Ring 2-PackTwo-pack of 3/8 inch Grade 70 forged steel grab hooks with a tie down ring and backing plate, max load 15,000 lbs.Check on Amazon
  • Grade 70 Grab Hook 3/8in3/8 inch Grade 70 forged steel bolt-on grab hook with a backer plate for tractor buckets, RVs, UTVs and trucks.Check on Amazon

Spec comparison

Hook GoatGear Score Working load limit Break strength Plate size Warranty Amazon
AUTMATCH 3/8in Grab Hook 9.7/10 9,000 lb 18,000 lb Not stated Not stated View on Amazon
AMBULL Tie Down Ring Hook 9.6/10 7,500 lb 15,000 lb 8 x 4.25 in Not stated View on Amazon
AMBULL Orange Grab Hook 9.6/10 7,500 lb 15,000 lb 3.25 x 4.25 in Not stated View on Amazon
VIAGL 3/8in Grab Hook 9.5/10 6,600 lb 15,400 lb Not stated Not stated View on Amazon
Robbor 3/8in Grab Hook 9.5/10 4,700 lb Not stated Not stated Not stated View on Amazon

Every spec repeats the brand’s rating from its listing (collected on 19 November 2026).

How to choose the best tractor bucket hooks with backer plate

Working load limit and break strength

Working load limit is the number to respect first: the AUTMATCH is rated at 9,000 lb, the two AMBULL hooks at 7,500 lb, the VIAGL at 6,600 lb and the Robbor at 4,700 lb. Break strength runs higher on every hook that states one, from 15,000 lb on the AMBULL hooks to 18,000 lb on the AUTMATCH, with the VIAGL at 15,400 lb. For lifting pallets with the same bucket, see our clamp on forks for tractor picks.

Hook Working load limit Break strength
AUTMATCH 9,000 lb 18,000 lb
AMBULL Tie Down 7,500 lb 15,000 lb
AMBULL Orange 7,500 lb 15,000 lb
VIAGL 6,600 lb 15,400 lb
Robbor 4,700 lb Not stated

Backer plate size and bolts

The backer plate spreads the pull across the bucket wall. The AMBULL tie down model welds its hook on a 1/4 inch thick, 8 by 4.25 inch plate, while the AMBULL orange hook uses a 1/4 inch thick, 3.25 by 4.25 inch plate. Bolt grade matters too: the AMBULL hooks and the AUTMATCH use Grade 10.9 bolts, while the VIAGL and Robbor use 1/2 inch Grade 8 bolts. For the other end of the job, see our quick attach for tractor bucket options.

Tie down rings and extra hardware

Only the AMBULL tie down model puts a D-ring on the same plate as the hook, so one mount gives a hook and a tie down point together. The AUTMATCH adds rubber pads that protect the bucket paint and the longest hardware list here: four Grade 10.9 flange bolts with flat washers, hex nuts, spring lock washers and metal self-locking nuts. The AMBULL, AUTMATCH and VIAGL hooks work with chains and ratchet binders for securing a load or as tow anchors. For more ring mounts, see our tractor bucket hooks with D ring guide.

Finish and rust protection

The AMBULL hooks, the AUTMATCH and the VIAGL are galvanized and powder coated, and the VIAGL listing says the galvanized surface stands up to rain, snow and harsh weather. The Robbor kit is zinc chromate plated for weather protection. Wipe mud and grit off the hooks after a wet day so the coating stays clean and the chain seats well.

Around the Barn

  • Bolt each hook through the bucket wall with the backer plate inside and the bolts the maker includes.
  • Keep the load inside the stated working load limit for each hook.
  • Keep the AUTMATCH rubber pads between the plate and the bucket when you bolt the mount down.
  • The AMBULL tie down model puts the hook and the D-ring on one plate.
  • Rinse mud off the hooks so the coating keeps doing its job.

FAQs from goat keepers

What working load limit do these bucket hooks have?

The AUTMATCH is rated at 9,000 lb, the two AMBULL hooks at 7,500 lb, the VIAGL at 6,600 lb and the Robbor at 4,700 lb.

What is the break strength of these hooks?

The AUTMATCH states 18,000 lb, the VIAGL states 15,400 lb, and the two AMBULL hooks state 15,000 lb.

Do these hooks come with a backer plate?

Yes. All five hooks come with a backer plate and the bolts to mount it. The AMBULL tie down model uses an 8 by 4.25 inch plate.

What bolts come with these bucket hooks?

The AMBULL hooks use Grade 10.9 bolts with a lock nut, and the AUTMATCH uses four Grade 10.9 flange bolts with washers and nuts. The VIAGL and the Robbor use 1/2 inch Grade 8 bolts with washers and a nylon lock nut.

Which of these hooks has a tie down ring?

The AMBULL tie down model puts the grab hook and the D-ring on one plate, so one mount gives a hook and a tie down point together.

AUTMATCH 3/8in Grab Hook
Still deciding? Our top pickAUTMATCH 3/8in Grab Hook
Check price on Amazon

Behind the Farm Score

The GoatGear Score weighs performance, build, value, safety and warranty. For bucket hooks, safety means the stated working load limit, break strength, bolt grade and locking hardware. None of the five state a warranty term with a length; the AUTMATCH listing promises lifetime customer support instead. How we pick explains the weights.

Product GoatGear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
AUTMATCH 3/8in Grab Hook 9.7 32 22 21 8 0
AMBULL Tie Down Ring Hook 9.6 30 21 21 7 0
AMBULL Orange Grab Hook 9.6 30 21 20 7 0
VIAGL 3/8in Grab Hook 9.5 28 20 20 7 0
Robbor 3/8in Grab Hook 9.5 26 19 20 6 0

We translate each weighted point total onto the 9.2 through 9.8 band; ranks never flip, because the conversion is linear.

More from the barn

See every tractor attachment guide and all tractor and farm implement guides. Also see our best tractor bucket hooks with D ring. Also see our best quick attach for tractor bucket. Also see our best tractor pallet forks. Also see our best loader bucket for compact tractor. Also see our best digging bucket for tractor. Also see our best 3 point hitch receiver for 2 inch hitch. Also see our best Cat 1 quick hitch. Also see our best tractor implement hitch pins.

More picks: browse tractor implements, tractor attachments and pasture tools.