Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Clipper Guard Size: Which Length to Buy for Goats

Clipper guard size decides the length left after a clip, and these four guard sets cover 1/16 inch to 2 inches with different blade fits and organizers.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

Clipper Guard Size: Which Length to Buy for Goats
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Wahl 12 Color Coded GuardsWahl 12 Color Coded Guards9.7/10View on Amazon
  2. 2LAVEST 10 Guards with HolderLAVEST 10 Guards with Holder9.6/10View on Amazon
  3. 3CR8GR8 10 Coded GuardsCR8GR8 10 Coded Guards9.6/10View on Amazon
  4. 4LAVEST 4 Long GuardsLAVEST 4 Long Guards9.6/10View on Amazon

A goat on the stand, clippers humming, and the clipper guard size on the blade decides how much coat stays behind. This guide covers clipper guard size: what the numbers on the guards mean, how to match a guard to the blade, and which sets cover the lengths a goat keeper needs. Every number below comes from the listings compared in this guide.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Wahl 12 Color Coded Guards

Wahl 12 Color Coded Guards

Wahl9.7/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A genuine Wahl set of 12 color-coded guards from 1/16 inch to 1 inch, with left and right ear tapers and an organizer caddy.

Pros

  • 12 guards from 1/16 inch to 1 inch
  • Color-coded guards identify lengths fast
  • Organizer caddy keeps guards in order
  • Genuine Wahl accessory with ear tapers

Cons

  • No warranty term is stated
  • Kit counts 14 pieces with the organizer parts
  • Ear tapers suit only ear work
  • Fits standard Wahl clippers only per the listing
LAVEST 10 Guards with Holder

LAVEST 10 Guards with Holder

LAVEST9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Ten black guards from 1/16 inch to 1 inch with an organizer holder, fitting clippers with a 1.8 by 1.5 inch blade.

Pros

  • 10 guards cover 1/16 inch to 1 inch
  • Organizer holder included
  • Fits a long list of Wahl models
  • Blade size stated as 1.8 by 1.5 inches

Cons

  • No warranty term is stated
  • Black guards only, no color coding stated
  • Compatibility list spells the brand Wahx
  • Holder stores the guards, not the clipper
CR8GR8 10 Coded Guards

CR8GR8 10 Coded Guards

CR8GR89.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Ten coded cutting guides from 1/16 inch to 1 inch, fitting blades 1.5 by 1.75 inches wide.

Pros

  • 10 sizes from 1/16 inch to 1 inch
  • Coded guides for quick size checks
  • PC material, easy to clean per the maker
  • Wide Wahl and Babyliss compatibility stated

Cons

  • No warranty term is stated
  • Listing says PC material, then says ABS
  • Blade width range stated as 1.62 to 1.75 inches
  • No organizer or holder stated
LAVEST 4 Long Guards

LAVEST 4 Long Guards

LAVEST9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

Four black guards in sizes 16, 14, 12 and 10, cutting from 1-1/4 inches to 2 inches for longer coats.

Pros

  • Longest lengths here, up to 2 inches
  • Four guards cover the long end of the range
  • Fits the same 1.8 by 1.5 inch blade
  • Rigid build for a precise cut per the maker

Cons

  • No warranty term is stated
  • Only 4 lengths, no short guards
  • No holder or organizer stated
  • Long guards suit only longer coats

As an Amazon Associate I earn from qualifying purchases.


Also worth comparing

Clipper guard size: the short answer

Clipper guard size is the length of coat the guard leaves after a clip, and the guard number tells you that length. The sets compared here run from 1/16 inch on the smallest guard to 2 inches on the longest, with the common 10-piece sets covering 1/16 inch to 1 inch and the 4-piece LAVEST set covering 1-1/4 inches to 2 inches. Pick the guard number for the length you want, then check that the guard fits your clipper blade before you order.

Reading the guard numbers

Guard numbers run in order with the lengths they leave. The CR8GR8 listing names ten lengths from 1/16 inch to 1 inch, and the Wahl kit lists guards numbered 0.5 through 8 with the same range, so the two lists line up:

Guard number Length left Guard number Length left Amazon
0.5 1/16 inch 5 5/8 inch
1 1/8 inch 6 3/4 inch
1.5 3/16 inch 7 7/8 inch
2 1/4 inch 8 1 inch
3 3/8 inch 10 1-1/2 inches
4 1/2 inch 12 1-3/4 inches

The 4-piece LAVEST set adds guards 16, 14, 12 and 10 for 1-1/4 inches to 2 inches, with guard 16 at 2 inches. The Wahl set adds a left ear taper and a right ear taper, and its guards are color coded, while the LAVEST and CR8GR8 guards are black.

Check blade fit before you order

A guard only fits a blade of the right size, and the listings state that size plainly. The LAVEST sets fit clippers with a 1.8 by 1.5 inch (45 by 38 mm) blade and tell buyers to measure the blade or check the compatibility chart before ordering. The CR8GR8 set fits a blade size of 1.5 by 1.75 inches, with a width range of 1.62 to 1.75 inches. The Wahl set fits standard Wahl clippers (on Amazon) and points buyers to an image chart for blade sizes. Measure the blade, then match the number to the listing. The listings also name Wahl models such as the Magic Clip, Super Taper and Taper 2000, plus Babyliss and Surker models on the CR8GR8 set.

Clipper guard size: the gear

The sets below cover 1/16 inch to 2 inches, and each card says which lengths and blade size it handles.

Read the listing twice

Guard listings often count things in more than one way, and the numbers that conflict are usually the ones you need before ordering:

  • Wahl: 12 guards in the title against a 14 piece kit in the spec table. The kit contents list 12 guards plus an organizer top and an organizer bottom, so the two numbers count different things.
  • CR8GR8: PC material in one bullet against ABS in another. The listing never settles which plastic the guards use.
  • LAVEST 10-piece: the compatibility heading spells the brand Wahx, while the rest of the listing says Wahl.
  • LAVEST 4-piece: guard numbers 16, 14, 12 and 10 in the title against cutting lengths from 1-1/4 inches to 2 inches in the bullets, which line up with guard 16 at the long end.

Measure your blade before ordering. If a listing leaves the material unclear, treat that as a gap and weigh it against the stated sizes.

FAQs from goat keepers

What clipper guard size leaves the longest coat?

The longest guard here is 2 inches, in the 4-piece LAVEST set, which covers 1-1/4 inches to 2 inches. The 10-piece sets stop at 1 inch, so a keeper who wants a longer finish needs the long set.

Do these guards fit any clipper?

No. The LAVEST sets fit a 1.8 by 1.5 inch blade, the CR8GR8 set fits a 1.5 by 1.75 inch blade, and the Wahl set fits standard Wahl clippers. Measure your blade and check the model list in the listing before ordering.

How many guards do I need?

A 10-piece set covers 1/16 inch to 1 inch, which handles most clipping, while the 4-piece LAVEST set covers only 1-1/4 inches to 2 inches. Keepers who want the full range need a short set plus the long set.

What makes the Wahl set different from the others?

The Wahl set is a genuine Wahl accessory with color-coded guards, an organizer caddy and ear tapers, in a 14 piece kit holding 12 guards. The other sets are black guards without color coding, and only the LAVEST 10-piece set includes a holder.

Wahl 12 Color Coded Guards
Still deciding? Our top pickWahl 12 Color Coded Guards
Check price on Amazon

More from the barn

See every goat clipper guide and all grooming and handling guides.

More picks: best goat clippers, best clipper blades for goats, size 15 vs size 40 clipper blade and clipper blade oil.