
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Wahl Animal Maintenance Kit9.7/10View on Amazon - 2
Wahl Blade Ice Spray9.6/10View on Amazon - 3
Oster Blade Wash 18 oz9.5/10View on Amazon - 4
OMWAH 5-in-1 Clipper Spray9.5/10View on Amazon
A clipper guard clogged with hair drags instead of gliding, so learning how to clean clipper guards keeps the clipper cutting and the goat calm on the stand. This guide covers the steps in order: brush the hair out, wash the guards, dry them fully and oil the blades. The sprays and kits below handle each step, from a wash you pour to a kit with a brush, oil and disinfectant.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | Wahl Animal Maintenance Kit | 9.7/10 | Buy on Amazon |
| 2 | Wahl Blade Ice Spray | 9.6/10 | Buy on Amazon |
| 3 | Oster Blade Wash 18 oz | 9.5/10 | Buy on Amazon |
| 4 | OMWAH 5-in-1 Clipper Spray | 9.5/10 | Buy on Amazon |

Wahl Animal Maintenance Kit
A full-service kit with Clini-Clip disinfectant, blade oil, a large cleaning brush, a cleaning cloth and a soft carry-all case.
Pros
- Clini-Clip disinfects in two minutes
- Blade oil, brush, cloth and case in one kit
- Oil reduces friction and heat after each use
- 30 days manufacturer warranty is stated
Cons
- The disinfectant step adds two minutes to the routine
- Oil must be applied after each use
- At 1.16 lb it weighs more than a spray can
- No spray coolant is included

Wahl Blade Ice Spray
A 14 Fl Oz 3-in-1 spray that cools, lubricates and cleans clipper blades in one step.
Pros
- Cools, lubricates and cleans in one spray
- Reduces friction, heat and blade wear
- Leaves no heavy residue of oil
- Safe for most plastics
Cons
- No brush or cloth is included
- The 14 Fl Oz can runs out and needs replacing
- No disinfectant step is included
- The spray suits Wahl clippers and trimmers only

Oster Blade Wash 18 oz
An 18 oz non-aerosol liquid that cleans and lubricates clipper blades and flushes out trapped hair.
Pros
- Cleans and lubricates blades in one liquid
- Flushes hair from between the cutting blades
- Removes factory preservatives from new blades
- Non-aerosol pour can, 18 oz
Cons
- No warranty term is stated
- No brush or cloth is included
- No cooling spray is included
- No disinfectant is included

OMWAH 5-in-1 Clipper Spray
A 15 oz spray that cools, cleans, lubricates and protects clipper blades without removing them.
Pros
- Cools, cleans, lubricates and protects in one step
- No need to remove blades from the clipper
- Protective film helps prevent rust
- Trusted by grooming professionals
Cons
- No warranty term is stated
- No brush or cloth is included
- No disinfectant is included
- The 15 oz can is smaller than the 18 oz Oster wash
As an Amazon Associate I earn from qualifying purchases.
Also worth comparing
Andis Master Series Clipper Guard Comb SetCheck price on Amazon
Oster Professional Fast Feed Adjustable Pivot Motor ClippersCheck price on Amazon
Wahl USA Pro Ultra Quiet Torque Corded Hair ClipperCheck price on Amazon
Professional for Wahl Clipper Guards SetCheck price on Amazon
Clipper Guards Set Compatible with Most Wahl ClippersCheck price on Amazon
How to clean clipper guards: the short answer
Start with the clipper off and the guard off the blade. Brush the hair out of the guard teeth, wash the guard with blade wash, dry it fully, then oil the blade and put the guard back on. The Oster wash (on Amazon) handles the wash step, the Wahl Blade Ice and OMWAH sprays (on Amazon) handle the cool-and-oil step, and the Wahl kit handles the brush, oil and disinfect steps. The sections below take each step in turn, and the how to use clipper guards guide covers fitting the guard once it is clean.
The gear for the job
The wash, the sprays and the kit below cover the wash step, the cool-and-oil step and the brush-and-disinfect step.
Step 1: Brush the hair out
Guard teeth trap hair, and a brush clears it before any liquid touches the guard. The Wahl kit includes a large cleaning brush for this step, and the Oster wash flushes hair from between the upper and lower cutting blades. Work the brush through the teeth until the loose hair is gone, then tap the guard to shake out what the brush loosened. A guard that is brushed first needs less wash and dries sooner.
Step 2: Wash the guards
The wash step is where the Oster Blade Wash earns its place. The 18 oz liquid pour can cleans and lubricates clipper blades and removes factory-applied preservatives from new blades. Pour a little wash over the guard, work it through the teeth with the brush and let the wash carry the hair and grime away. The OMWAH spray and the Wahl Blade Ice also clean, but they are sprays for cooling and lubricating as much as cleaning, so the pour wash is the stronger choice when the guard is caked with hair. See the clipper guard sizes guide if you are unsure which guard length you are washing.
Step 3: Dry, oil and disinfect
A guard that goes back on wet can rust a blade, so dry the guard fully before it goes back on the clipper. The OMWAH spray leaves a protective film that helps prevent rust, and the Wahl Blade Ice cools the blade and leaves no heavy residue of oil. A few drops of blade oil after each use reduce friction and heat, and the Wahl kit includes the oil for that step. The kit also includes Clini-Clip disinfectant, which acts in two minutes and can be used on the workstation area as well as the blades. See the what hair clipper oil is guide for more on the oiling step.
Read the listing twice
Clipper care listings mix sizes and forms, so read the size line twice. The OMWAH title states 15 oz while the spec table states 14.99 Fl Oz. The Wahl Blade Ice title states 14 Fl Oz and the Oster title states 18 oz, so the Oster pour wash holds more liquid than either spray. The Wahl kit lists its contents by name, Clini-Clip, blade oil, a large cleaning brush, a cleaning cloth and a soft carry-all case, and the listing states a 30 days manufacturer warranty. Check the form too: the Oster wash is a non-aerosol pour can, while the Wahl Blade Ice and the OMWAH are sprays.
FAQs from goat keepers
How often should I clean clipper guards?
Clean the guards after each clip, before hair and grime build up. Brush the teeth out after each use and wash the guards when the hair will not brush out.
Can I wash clipper guards with blade wash?
Yes. The Oster Blade Wash is made for cleaning and lubricating clipper blades, and it flushes hair from between the cutting blades. Wash the guard, dry it fully and oil the blade before the guard goes back on.
Do I need to remove the blades to clean them?
No. The OMWAH spray is made to cool, clean and lubricate blades without removing them from the clipper. The Wahl kit brush and cloth also work with the blades in place.
What is in the Wahl maintenance kit?
The kit includes Clini-Clip disinfectant, blade oil, a large cleaning brush, a cleaning cloth and a soft carry-all case. Clini-Clip acts in two minutes, and a few drops of blade oil after each use reduce friction and heat.
Which spray cools clipper blades?
The Wahl Blade Ice is a 3-in-1 spray that cools, lubricates and cleans, and the OMWAH is a 5-in-1 spray that cools, cleans, lubricates and protects. Either spray works without removing the blades.
More from the barn
See every goat clipper guide and all grooming and handling guides.
More picks: best goat clippers, best clipper blades for goats, best clipper blade oil and best clipper cleaning brushes.
