
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
VGRPRO 12-Piece Guard Set9.7/10View on Amazon - 2
CR8GR8 10 Coded Guards9.6/10View on Amazon - 3
LAVEST 10-Piece Guard Set9.5/10View on Amazon - 4
LAVEST 3-Piece Short Set9.4/10View on Amazon
The morning milking is done, the hay is down, and a goat stands on the fence rail with a coat full of matted hair and burrs. That is when how to use clipper guards matters: the guard sets the length the clipper leaves behind. This guide covers how to use clipper guards on goats and livestock, from checking the blade size to fitting the guard, clipping with it on, and cleaning the set afterward. The guide compares 4 guard sets on size range, fit, holder and warranty.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | VGRPRO 12-Piece Guard Set | 9.7/10 | Buy on Amazon |
| 2 | CR8GR8 10 Coded Guards | 9.6/10 | Buy on Amazon |
| 3 | LAVEST 10-Piece Guard Set | 9.5/10 | Buy on Amazon |
| 4 | LAVEST 3-Piece Short Set | 9.4/10 | Buy on Amazon |

VGRPRO 12-Piece Guard Set
A 12-piece color-coded guard set covering 1/16 inch to 1 inch, with 2 ear taper combs, a cleaning brush, blade oil and a storage bag.
Pros
- 12 pieces: 10 guide combs plus 2 ear taper combs
- Sizes from 1.5 mm to 25 mm, covering 1/16 inch to 1 inch
- Cleaning brush, blade oil and storage bag included
- 18-month warranty stated
Cons
- Guard colors are assigned at random
- No blade size is stated for the fit check
- The listing is written for barber use, not goat grooming
- Only 10 of the 12 pieces are full guide combs

CR8GR8 10 Coded Guards
Ten coded cutting guides from 1/16 inch to 1 inch, fitting blades 1.5 by 1.75 inches wide.
Pros
- 10 sizes from 1/16 inch to 1 inch
- Coded guides for quick size checks
- PC material, easy to clean per the maker
- Wide Wahl and Babyliss compatibility stated
Cons
- No warranty term is stated
- Listing says PC material, then says ABS
- Blade width range stated as 1.62 to 1.75 inches
- No organizer or holder stated

LAVEST 10-Piece Guard Set
A 10-piece color-coded guard set with a holder, covering cutting lengths from 1/16 inch to 1 inch.
Pros
- 10 guards covering 1/16 inch to 1 inch
- Holder keeps the set together and in order
- Wide gap design lifts straight off for easier removal
- Blade size stated: fits 1.8 by 1.5 inch blades
Cons
- Guard colors are assigned at random
- No warranty term is stated
- Fits only 1.8 by 1.5 inch blades
- No cleaning brush or blade oil is included

LAVEST 3-Piece Short Set
A 3-piece set of black guards covering the short cutting lengths 1/16, 1/8 and 3/16 inch.
Pros
- Short lengths: 1/16, 1/8 and 3/16 inch
- Blade size stated: fits 1.8 by 1.5 inch blades
- Sturdy yet flexible build with a soft touch
- Same Wahl model list as the larger LAVEST set
Cons
- Only 3 guards, all short lengths
- No holder is included
- No warranty term is stated
- No cleaning brush or blade oil is included
As an Amazon Associate I earn from qualifying purchases.
Also worth comparing
Clipper Guards Set Compatible with Most Wahl ClippersCheck price on Amazon
Oster Professional Fast Feed Adjustable Pivot Motor ClippersCheck price on Amazon
Andis Master Series Clipper Guard Comb SetCheck price on Amazon
Wahl USA Pro Ultra Quiet Torque Corded Hair ClipperCheck price on Amazon
Cordless Quiet Horse Clippers for Thick Coats Dogs 4 GuardsCheck price on Amazon
Clipper Guards for WahlCheck price on Amazon
How to use clipper guards: the short answer
Check the blade size. Guards in this guide fit clippers with a 1.8 inch by 1.5 inch blade, so measure the blade or check the compatibility chart before ordering. Pick the guard length for the coat: lengths here run from 1/16 inch to 1 inch, with the shortest guards at 1/16, 1/8 and 3/16 inch. Snap the guard on until it sits flat, clip with the guard on, and clean the guards after the job. For the clippers these guards fit, see the goat clipper guides.
The clipper guard sets
Guards do the measuring in this job: the guard snapped on sets the length, so pick the set that covers the lengths the coat needs and fits the blade.
Measure the blade before you buy
Guard fit starts with the blade. The LAVEST sets state a fit for clippers with a 1.8 inch by 1.5 inch blade, and the LAVEST listings advise measuring the blade or checking the compatibility chart before ordering. The VGRPRO set states compatibility with most Wahl clippers and many professional hair clippers, and names VGRPRO models V-007 and V-886, but it states no blade size, so the fit check is the model list. The CR8GR8 listing states no blade size at all. Measure the blade with the guard off before ordering.
Pick the right guard length
Guard length is the length the clipper leaves behind. The LAVEST 10-piece set and the VGRPRO set cover 1/16 inch to 1 inch, and the VGRPRO set lists the sizes as 1.5 mm, 3 mm, 4.5 mm, 6 mm, 10 mm, 13 mm, 16 mm, 19 mm, 22 mm and 25 mm. The LAVEST 3-piece set covers the short end only, with guards at 1/16, 1/8 and 3/16 inch. Start with a longer guard when the coat is matted, then move to a shorter guard. For help choosing a length, see clipper guard size.
Each guard in the LAVEST 10-piece set is a different color, and the VGRPRO combs (on Amazon) are color-coded too, but colors are assigned at random, so a color does not name a standard size. Keep the set in order in the holder or storage bag.
Fit the guard on the clipper
A guard that is not seated flat can slip, so fit it with care. The LAVEST 10-piece set lists a wide gap between the guard and the clipper housing, so the guard lifts straight off. The VGRPRO set lists a metal clip for a stable, secure fit that prevents slipping during use. Press the guard on until it sits flat, and check that it does not rock or lift at the edge. If the guard will not seat, check the blade size again.
Clip with the guard on
With the guard seated, clip in smooth passes and let the guard set the length. The guard holds the blade at the guard length across the coat, so the cut stays even from pass to pass. Work in sections and clear hair from the guard as clipping goes on, so the guard does not clog. Lift the guard straight off when the coat is done.
Clean and store the guards
Hair left in a guard dries in place and makes the next clip harder, so clean the set after the job. The VGRPRO set states a smooth surface that rinses with water or brushes clean, and it comes with a cleaning brush, blade oil and a storage bag. The LAVEST 10-piece set comes with a holder that keeps the set together and in order. Dry the guards before they go back in the holder or bag.
Read the listing twice
Guard listings often contradict themselves:
- VGRPRO: the title says 12 pieces, and the bullets list 10 guide combs plus 2 black ear taper combs, which is the 12 pieces the title states.
- LAVEST 10-piece: the listing says each guard is a different color so the size can be picked at a glance, then notes that guard colors are assigned at random, so a color does not name a standard size.
- CR8GR8: the listing gives a title only, with no bullets and no spec table, so material, blade size and warranty are not stated.
- LAVEST 3-piece: the title and the bullets agree on 3 guards at 1/16, 1/8 and 3/16 inch.
Measure the blade before ordering.
What this guide does not cover
This guide covers guard sets and guard handling only, not clipper care or any goat health question. Ask your veterinarian or local extension office about goat health.
FAQs from goat keepers
What size clipper guard suits a goat?
It depends on the coat. Guard lengths in this guide run from 1/16 inch to 1 inch, and the VGRPRO set lists sizes from 1.5 mm to 25 mm. Start with a longer guard when the coat is matted, then move to a shorter guard.
Do clipper guards fit every clipper?
No. The LAVEST sets fit clippers with a 1.8 inch by 1.5 inch blade, and the VGRPRO set lists models instead of a blade size. Measure the blade or check the compatibility chart before ordering.
How to tell which guard is which length?
Color helps, but it is not a standard. The LAVEST 10-piece set gives each guard a different color, and the VGRPRO combs are color-coded, yet colors are assigned at random. Keep the guards in order in the holder or storage bag.
Can a 3-piece guard set handle a full clip?
The LAVEST 3-piece set covers 1/16, 1/8 and 3/16 inch only, so longer lengths need a wider set such as the LAVEST 10-piece set or the VGRPRO set.
What comes with a clipper guard set?
The LAVEST 10-piece set comes with a holder, the VGRPRO set comes with a cleaning brush, blade oil and a storage bag, the LAVEST 3-piece set lists guards only, and the CR8GR8 set lists no extras.
More from the barn
See every goat clipper guide and all grooming and handling guides.
More picks: best clipper blades for goats, clipper guard size, goat grooming gloves and horse clippers vs goat clippers.
