Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

What Is Hair Clipper Oil and How to Use It

What is hair clipper oil, and how do you use it on goat clippers? A plain guide to oil, spray and grease, with stated sizes and maker directions.

What Is Hair Clipper Oil and How to Use It
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1BarberTop 2PCS Hair Clipper Blade Lubricating Oil Set withBarberTop 2PCS Hair Clipper Blade Lubricating Oil Set with9.6/10View on Amazon
  2. 2Wahl Hair Clipper Blade Lubricating OilWahl Hair Clipper Blade Lubricating Oil9.4/10View on Amazon
  3. 3Artero Oil Fresh Clipper SprayArtero Oil Fresh Clipper Spray9.6/10View on Amazon
  4. 4Hair Clipper & Trimmer OilHair Clipper & Trimmer OilView on Amazon
  5. 5Andis Clippers Clipper Oil 4 ozAndis Clippers Clipper Oil 4 ozView on Amazon
  6. 6Andis Clippers Clipper OilAndis Clippers Clipper OilView on Amazon
  7. 7Andis Clipper OilAndis Clipper OilView on Amazon

Morning milking is done, the goats are back on hay, and the clipper that trimmed a rough coat last week now drags and pulls instead of cutting clean. What is hair clipper oil? It is a light lubricating oil made for clipper blades, and it keeps the moving blades sliding over each other with less friction, less heat and less wear. This guide explains what the oil is, how it differs from sprays and grease, and how to apply it to goat clippers using the directions the makers publish.

Also worth comparing

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

What is hair clipper oil: the short answer

Hair clipper oil is a light oil that lubricates the metal blades of a clipper or trimmer. The Oster Premium Blade Lube listing describes a non-detergent oil that meets FDA purity standards, sold as 4 fluid ounces, and directs the user to apply it while blades are moving. The oil sits between the moving blade and the fixed blade, so the cutting edges slide instead of grinding, which the makers link to longer blade life and a smoother cut.

Clipper oil is a maintenance supply, not a cutting tool. It does not sharpen a blade, and it does not replace cleaning hair from the teeth. What it does, in the words of the listings, is reduce friction and heat, slow wear, and, in the listings that state it, guard against rust. The rest of this guide compares the forms it comes in and walks through the application steps the makers publish.

Oil, spray, or grease compared

Listings sell clipper lubrication as a bottled oil, a spray, or a grease. The table below uses the sizes and claims each listing states.

Form Example listing Stated size What the maker lists it for
Oil Oster Premium Blade Lube 4 fluid ounces Lubricates clippers, trimmers and blades; apply while blades are moving
Oil Supreme Trimmer STO120 120ML Lubricates blades; reduces friction and improves blade performance
Oil FrostMusic blade oil 4.05 oz / 120 ml Rust prevention and lubrication; 2-3 drops every few haircuts
Spray Wahl Blade Ice 14 Fl Oz Cools, lubricates and cleans blades in a 3-in-1 spray
Spray Andis Cool Care Plus Not stated Cools, cleans, lubricates, disinfects and prevents rust in a 5-in-1 spray
Grease Oster Gear Lube 1.25 ounces Lubricates and cools blade surfaces on universal motor clippers

Bottled oil

Bottled oil is the plainest form. The Oster listing calls its oil a premium lubricating oil for professional use, and the Supreme Trimmer listing describes its 120ML bottle as a professional grade lubricant with a needle applicator. The FrostMusic listing adds a brush with its 4.05 oz / 120 ml bottle and states 2-3 drops every few haircuts. A bottle suits a keeper who oils blades as part of a regular routine and wants a measured amount on the blades.

Spray

Sprays combine lubrication with cooling and cleaning. The Wahl Blade Ice listing describes a 3-in-1 spray that cools, lubricates and cleans, in a 14 Fl Oz can, and says regular use reduces friction, heat and blade wear. The Andis Cool Care Plus (on Amazon) listing describes a 5-in-1 spray that cools, cleans, lubricates, disinfects and prevents rust, and says it blows hair and dirt from between the teeth. A spray suits a keeper who wants to clean and cool the blades in the same step as oiling.

Grease

Grease is thicker than oil and stays where it is put. The Oster Gear Lube listing describes a premium clipper grease in a 1.25 ounces tube, made for universal motor clippers, and directs the user to apply it when operating clippers for extended periods of time. Grease suits long clipping sessions, where the maker lists cooling the blade surface as the point.

How to oil clipper blades step by step

Start with clean blades. The Andis listing says its spray blows hair and dirt from between the teeth, and the Vetmor kit (on Amazon) includes a cleaning brush for the same job, so clear the cut hair from the blades before oiling. A brush, such as the brush the FrostMusic listing includes with its bottle, reaches the teeth without touching the cutting edge with a bare hand.

Apply the oil while the blades are moving, as the Oster listing directs. The FrostMusic listing states 2-3 drops every few haircuts, and the same listing states 2-3 drops per week for routine care, so a few drops is the amount the makers describe, not a stream of oil. Let the blades run briefly so the oil spreads across the cutting surfaces, then wipe away the excess with a cloth, as the rongyudzsw kit listing includes a polishing cloth among its contents.

Store the bottle where the maker directs. The Vetmor listing says to store the product in a dry place and keep it out of reach of children and pets, and the FrostMusic listing says to avoid eye and mouth contact and keep the product out of children’s reach. Keep the cap on and the bottle upright between uses, and keep it away from the feed room floor where a goat can knock it over.

For the guards that set cutting length, see how to use clipper guards on goats and livestock, and check clipper guard size before a trim so the guard and the oiled blades work together.

How often to oil

Frequency depends on how much clipping happens. The FrostMusic listing states 2-3 drops every few haircuts for regular use and 2-3 drops per week for routine care, and the same listing says the bottle can last 2-3 years or longer at that rate. The Andis listing describes its spray as a step after each haircut, for cleaning and disinfection as well as lubrication. The Oster Gear Lube listing directs grease use when operating clippers for extended periods of time. A keeper who clips a full herd in a session will oil more often than a keeper who trims a goat now and then, and the listings above give the rhythm to follow.

Heat and noise are the signs the makers point to. The Wahl Blade Ice listing says its spray reduces friction and heat, and the Vetmor listing says its oil reduces working noise and cools heating blades. When blades run hot or loud, that is the moment to clean and oil them, before the next goat goes on the stand.

What hair clipper oil is not

Oil is not a disinfectant unless the listing says so. The Andis spray lists disinfection among its 5 functions, and the Wahl spray lists cleaning, but the plain oil listings from Oster, Supreme Trimmer and Panasonic describe lubrication only. Oil is also not a sharpener: the FrostMusic listing says its oil helps slow blade dulling, which is a claim about wear, not about restoring an edge. When a blade pulls hair instead of cutting, the listing answer is a fresh blade or a professional sharpening service, not more oil.

Oil is also not a substitute for the right blade. The size and type of blade decide the cut length, and the oil only keeps the blade moving freely. For blade choices, see the blades for Andis clippers guide and the cordless livestock clippers roundup.

Read the listing twice

Clipper oil listings are short, and the figures they state do not always line up:

  • Wahl 2pc bottle (on Amazon): the title says a 2pc bottle set, the bullets say 2oz of oil, and the same bullets mention a bonus cleaning brush.
  • rongyudzsw kit: the title states 100ml and the bullets state 3.5 fl oz for the same bottle of oil.
  • Oster Gear Lube: the spec table gives a warranty description of only “1”, with no unit attached, so the term is not clear from the listing.
  • Supreme Trimmer STO120 (on Amazon): the size of 120ML appears in the color field of the spec table rather than in a size field, so read the whole listing before ordering.

Check the stated size against the bottle in hand when it arrives, and keep the listing open while comparing, since the same product can show its size in several places.

What this guide does not cover

This guide covers clipper oil and its application only. It does not cover blade sharpening, clipper repair, or any goat health question. Ask a veterinarian or local extension office about goat health and care.

FAQs from goat keepers

What is hair clipper oil?

Hair clipper oil is a light lubricating oil made for clipper blades. It reduces friction, heat and wear between the moving blades, and the listings that state it also list rust prevention among its jobs.

How many drops of oil do clipper blades need?

The FrostMusic listing states 2-3 drops every few haircuts, and the same listing states 2-3 drops per week for routine care. That is the amount the maker describes; more oil does not make the blades cut better.

Can I use hair clipper oil on goat clippers?

Yes, according to the listings. The Wahl Blade Ice listing names livestock among its uses, the Panasonic listing describes its oil as suitable for all hair clippers and beard trimmers, and the Vetmor listing names pet grooming among its uses.

Does hair clipper oil prevent rust?

Some listings state it and some do not. The Andis spray, the FrostMusic oil (on Amazon) and the Vetmor oil all list rust prevention, while the Oster Blade Lube listing describes lubrication only and states no rust claim.

How often should I oil clipper blades?

Follow the maker directions on the bottle in hand. The FrostMusic listing states 2-3 drops per week for routine care, the Andis listing describes its spray as a step after each haircut, and the Oster Gear Lube listing directs grease use during extended clipping sessions.

More from the barn

See every goat clippers guide and all grooming and handling guides.

More picks: how to use clipper guards, clipper guard size, blades for Andis clippers and cordless livestock clippers.