
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
SKYSEN 14 Inch Gate Spring9.6/10View on Amazon - 2
TIBEGOLD 11-1/2 Gate Spring9.6/10View on Amazon - 3
HOME MASTER 11 Inch Gate Spring9.6/10View on Amazon - 4
Hardware Essentials Gate Spring9.5/10View on Amazon
A goat slipping through a gate left open can scatter hay across the yard and wander into the garden, so a gate that closes itself is part of the daily routine. This guide covers gate closer weight, matching a spring closer to the gate it has to pull shut, and compares the springs that do the job.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | SKYSEN 14 Inch Gate Spring | 9.6/10 | Buy on Amazon |
| 2 | TIBEGOLD 11-1/2 Gate Spring | 9.6/10 | Buy on Amazon |
| 3 | HOME MASTER 11 Inch Gate Spring | 9.6/10 | Buy on Amazon |
| 4 | Hardware Essentials Gate Spring | 9.5/10 | Buy on Amazon |

SKYSEN 14 Inch Gate Spring
A 14 inch carbon steel gate spring in a 2 pack with an adjustment rod, for wooden or vinyl gates.
Pros
- Longest spring here at 14 inch
- 2 pack with 8 screws, 1 fix pin and 1 adjust rod
- Carbon steel with a black powder coat
- Fits side, front, single and privacy gates
Cons
- No warranty term is stated
- No maximum gate weight is stated
- A 2 pack may exceed a single gate's needs

TIBEGOLD 11-1/2 Gate Spring
An 11-1/2 inch steel gate spring with adjustable tension for wooden and vinyl fence gates.
Pros
- Adjustable tension with a tension pin and rod
- Steel with a black powder coating
- Suits left and right swing doors
- Installation guide included, from step 1 to step 5
Cons
- No warranty term is stated
- No maximum gate weight is stated
- One spring covers one gate only

HOME MASTER 11 Inch Gate Spring
An 11 inch carbon steel gate spring in a 2 pack with hexagonal nut tension adjustment.
Pros
- 2 pack with 8 mounting screws and 2 fix pins
- Tension adjusts with a hexagonal nut
- Carbon steel with a black powder coated finish
- Clear fitting marks: the TOP end goes on the gate
Cons
- No warranty term is stated
- No maximum gate weight is stated
- The nut must be set exactly to the TOP TIGHTEN mark

Hardware Essentials Gate Spring
A 12 inch stainless steel gate spring with adjustable tension for gates that need automatic closure.
Pros
- Stainless steel, the only one of its kind here
- 12 inch size with adjustable tension
- Listing names strength and superior durability
- Single spring for one gate
Cons
- No warranty term is stated
- No maximum gate weight is stated
- No mounting hardware is listed as included
As an Amazon Associate I earn from qualifying purchases.
How to choose a gate closer weight: the short answer
Start with the spring, not the gate weight. None of the four listings states a maximum gate weight, so judge weight through the spring itself: its length, adjustable tension and build. Pick the length that fits the gap between post and gate, check the tension can be adjusted, and choose powder-coated steel or stainless steel for outdoor use.
Gate closer weight: the springs that do the pulling
The springs below match tension to the gate, each listed with the part of that job it covers.
Four gate springs compared
| Spring | Length | Pack | Material | Tension adjustment | Amazon |
|---|---|---|---|---|---|
| SKYSEN 14 Inch Gate Spring | 14 inch | 2 pack | Carbon steel, black powder coated | Adjustment rod and fix pin | View on Amazon |
| TIBEGOLD 11-1/2 Gate Spring | 11-1/2 inch | 1 pack | Steel, black powder coating | Tension pin and adjustment rod | View on Amazon |
| HOME MASTER 11 Inch Gate Spring | 11 inch | 2 pack | Carbon steel, black powder coated | Hexagonal nut | View on Amazon |
| Hardware Essentials Gate Spring | 12 inch | 1 pack | Stainless steel | Adjustable tension, method not stated | View on Amazon |
Longer springs
The longest spring here is the SKYSEN at 14 inch, sold as a 2 pack with 8 installation screws, 1 fix pin and 1 adjust rod, fitting side, front, single and privacy gates.
Shorter springs
TIBEGOLD measures 11-1/2 inch and HOME MASTER 11 inch, both made for wooden and vinyl gates. The TIBEGOLD pack holds 1 spring with 2 tension pins, 1 adjustment rod and 4 screws; the HOME MASTER pack holds 2 springs with 8 mounting screws and 2 fix pins.
Stainless steel
Hardware Essentials is the only stainless steel spring here, at 12 inch, and its listing names strength and superior durability as the reason for the material. It is sold as a single spring, and installation needs a drill, bit, screwdriver and wrench.
Reading the spring against the gate
Since no listing states a maximum gate weight, length and tension adjustment are the figures to compare: measure the gap between post and gate before ordering and pick the length that fits it. A spring that is too short will not reach both fixings; one that is too long will hang slack and pull weakly.
Tension adjustment turns a length into a closing pull. TIBEGOLD adjusts with a tension pin and an adjustment rod, SKYSEN with an adjust rod and a fix pin, and HOME MASTER by turning a hexagonal nut clockwise to tighten and counterclockwise to loosen. Hardware Essentials says only that tension is adjustable, so its method is not stated.
Mounting and where the spring goes
Each spring fixes to the post on one end and the gate on the other. TIBEGOLD says to attach the spring on both sides of the post and gate, keep the tension pin on the outside of the spring, and follow the installation guide from step 1 to step 5. HOME MASTER adds: the end with the TOP sticker must face upward, that end goes on the gate, the other end goes on the doorpost, and the spring should sit as vertically as possible. TIBEGOLD suits both left and right swing doors. For a closer look at heavy duty options, see the best heavy duty spring gate closer roundup.
Materials: steel, powder coating or stainless steel
Three of the four springs are steel with a black powder coating; the fourth is stainless steel. TIBEGOLD describes premium quality steel with a black powder coating for corrosion and rust resistance, SKYSEN high quality carbon steel with a black powder coat, and HOME MASTER premium carbon steel with a black powder coated anti-corrosion, anti-rust finish. All three are described by the makers as made for long-term outdoor use. Hardware Essentials takes the other route, with stainless steel and no coating to wear off, which suits a damp spot where a coated spring would show rust first.
Adjusting the closing pull
With TIBEGOLD, the tension pin and adjustment rod set the spring tension and so control the closing speed. With SKYSEN, the adjust rod sets the tension and the fix pin locks it; the listing adds that if the spring does not work after installation, lock the adjustment pin in the opposite direction. With HOME MASTER, the hexagonal nut turns to tighten or loosen, and the listing warns that the nut can only be screwed to the end of the word TOP TIGHTEN, after which the toggle goes up at once. The spring vs hydraulic gate closer comparison explains when a spring closer is enough and when a hydraulic closer suits the gate better.
Read the listing twice
Gate spring listings often contradict themselves, and the conflicting numbers are usually the ones needed for fitting:
- TIBEGOLD: 11-1/2 inch in the title and bullets against 11.5 inches x 11.5 inches x 11.5 inches in the spec table.
- SKYSEN: 14 inch in the title and bullets against a spec table of 4.33 inches x 15.35 inches x 1.18 inches.
- Hardware Essentials: 12 inch in the title and bullets against a spec table that lists 15.37 inches as one dimension.
- HOME MASTER: 11 inch in the title and bullets against a spec table of 11.0 inches x 11.0 inches x 11.0 inches.
Trust the title and bullets over the spec table, and measure the gap before ordering. None of these listings states a warranty term or a maximum gate weight, so neither figure can be compared here.
What this guide does not cover
This guide covers spring closers only, not gate latches, hinges, gate weight ratings, how to hang a gate, or hydraulic closers beyond the comparison linked above.
FAQs from goat keepers
What gate closer weight does a gate need?
No listing states a maximum gate weight, so match the spring by length and adjustable tension. Pick the length that fits the gap, then tune the tension until the gate closes fully without slamming.
What size gate spring does a gate need?
The springs here measure 11, 11-1/2, 12 and 14 inch. Measure the gap and choose the length that reaches both fixings with room to adjust.
Do gate springs fit wooden and vinyl gates?
Three of the four listings say so: TIBEGOLD, SKYSEN and HOME MASTER all list wooden and vinyl gates, and TIBEGOLD and HOME MASTER also list metal gates. Hardware Essentials names no gate type.
Do gate springs come with mounting hardware?
Three of the four do: TIBEGOLD includes 2 tension pins, 1 adjustment rod and 4 screws; SKYSEN 8 installation screws, 1 fix pin and 1 adjust rod; HOME MASTER 8 mounting screws and 2 fix pins. Hardware Essentials names no included hardware; a drill, bit, screwdriver and wrench are required.
More from the barn
See the best gate closer for wooden gates roundup for more gate closer options.
More picks: best heavy duty spring gate closers, spring vs hydraulic gate closers, gate latches and gate closers for wooden gates.
