Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Lever vs Screw Cheese Press: Which One Should You Buy?

Lever vs screw cheese press, compared through a wooden lever press, a steel screw press and a lever cookie press: mechanism, mold size, stated pressure and box contents.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

Lever vs Screw Cheese Press: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1SAEHAEYEE Screw PressSAEHAEYEE Screw Press9.6/10View on Amazon
  2. 2PetriStor Lever PressPetriStor Lever Press9.6/10View on Amazon
  3. 3OXO Lever Cookie PressOXO Lever Cookie Press9.3/10View on Amazon

The lever vs screw cheese press question comes up once a morning milking leaves more milk than the fridge needs. Both sides press curds, but they do it differently: a lever hangs weights from a long arm, while a screw turns a knob to tighten the press. We compared the listings below by mechanism, mold size, stated pressure, material and what comes in the box, using only what each listing publishes.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick verdict: choose the lever side for large cheese molds pressed with hanging weights, as the PetriStor example shows. Choose the screw side for small batches pressed in a compact steel press with a drip tray, as the SAEHAEYEE example shows. The lever side also carries a cookie press example, which shows a lever mechanism but does not press cheese, so read the lever case through the PetriStor example.

Three examples

SAEHAEYEE Screw Press

SAEHAEYEE Screw Press

SAEHAEYEE9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A food-grade 304 stainless steel screw press with an adjustable screw knob, a drip tray and a cheesecloth, sized for small tofu, paneer and fresh cheese batches.

Pros

  • Adjustable screw knob customizes pressure to soft, firm or ultra-dense results
  • Food-grade 304 stainless steel with no plastic parts, per the listing
  • Drip tray and drainage base plate channel moisture away from the counter
  • 3-piece detachable design is stated as dishwasher safe for cleaning

Cons

  • No pressure figure in pounds is stated, so it cannot be ranked on pressure
  • Large capacity is given as both 2 lbs and 35 oz, which do not match
  • No warranty term is stated
  • Compact size suits small batches rather than large cheese rounds
PetriStor Lever Press

PetriStor Lever Press

PetriStor9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A moisture-resistant plywood lever cheese press with two 6.2 in diameter molds, two cheesecloths and stated pressure up to 400 pounds.

Pros

  • Stated pressure up to 400 pounds, the only pressure figure here
  • Two 6.2 in diameter molds included, with room for a mold up to 11 inches
  • Long lever with notches to hang weights from for controlled pressure
  • Moisture-resistant plywood coated with a vegetable-derived oil wax

Cons

  • No warranty term is stated
  • Metal canister is not included, per the listing
  • Mold-size line in the listing is hard to parse, so rely on diameters
  • Wooden press suits larger rounds rather than small single batches
OXO Lever Cookie Press
OXO9.3/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A lever cookie press with 12 stainless steel disks, a clear body and a storage case, included here only as a lever-mechanism example, not as a cheese press.

Pros

  • Lever press design shows lever motion in a small handheld form
  • 12 stainless steel disks give varied spritz cookie shapes
  • Clear body shows how much dough is left during pressing
  • Storage case keeps all 12 disks together

Cons

  • Not a cheese press: it states no cheese mold and no cheese pressure figure
  • No warranty term is stated
  • Hand wash only, unlike the dishwasher-safe screw press
  • Item weight of 1.6 pounds covers a handheld tool, not a cheese press

As an Amazon Associate I earn from qualifying purchases.


Also worth comparing

Lever vs screw cheese press: side by side

Press GoatGear Score Mechanism Mold or capacity Material Box contents Warranty Amazon
SAEHAEYEE Screw Press 9.6/10 Screw knob, adjustable Large 2 lbs, 6.3 by 4.7 in 304 stainless steel Press, drip tray, cheesecloth Not stated View on Amazon
PetriStor Lever Press 9.6/10 Lever with weight notches Molds 6.2 in diameter, up to 11 in Moisture-resistant plywood Press, 2 molds, 2 cheesecloths Not stated View on Amazon
OXO Lever Cookie Press 9.3/10 Lever press 12 disks for spritz cookies Stainless steel disks Press, 12 disks, storage case Not stated View on Amazon

Every spec repeats the brand’s rating from its listing (collected on 2 November 2026).

How each side presses

A lever press uses a long arm and hanging weights. The PetriStor listing describes a long lever with notches to hang weights from, so pressure rises as weights are added, and a stabilising base that steadies the structure when a bigger load is used. The listing states pressure up to 400 pounds of piston pressure, which is the only stated pressure figure in this comparison.

A screw press uses a turning knob. The SAEHAEYEE listing describes a smooth, continuous-turn screw knob that lets the user customize pressing pressure to soft, firm or ultra-dense results, with a hollowed-out drainage base plate that channels moisture into a matching drip tray. The listing states no pressure figure in pounds, so the two sides cannot be ranked on pressure from these listings alone. The OXO lever example works differently again: it presses dough through disks with a lever, which shows the lever motion in a small handheld form but says nothing about cheese pressure. For mold shapes that pair with a press, see our round vs square cheese press guide.

Mold size, capacity and stated pressure

Mold size separates the cheese examples more clearly than mechanism alone. The PetriStor press comes with two 6.2 in diameter cheese molds, and the listing states a mold with a diameter of up to 11 inches can be installed, so it suits larger rounds than the screw example. The SAEHAEYEE press, by contrast, is a compact unit: the Large size gives a 2 lbs capacity at 6.3 by 4.7 in, and the listing also describes a Small size at 1 lb and 4.7 by 4.7 in, so shoppers should confirm which size a listing offers before ordering.

Stated pressure tells a one-sided story here. Only the PetriStor example states a pressure figure, at up to 400 pounds, while the screw example states capacity and time for tofu instead: water removal in 10 to 20 minutes for tofu, with no pounds of pressure given. With only one side stating a figure, this comparison does not crown a pressure winner.

Material, cleaning and what comes in the box

Materials differ by side and by example. The PetriStor press is made of moisture-resistant plywood coated with a vegetable-derived oil wax, with two cheese molds and two cheesecloths in the box, while the metal canister is not included. The SAEHAEYEE press is made entirely from food-grade 304 stainless steel with no plastic parts, per the listing, and comes with a drip tray and a reusable cheesecloth in a 3-piece detachable design that the listing states is dishwasher safe. The OXO press has a clear body, 12 stainless steel disks and a compact storage case, and the listing states hand wash only, so its cleaning routine differs from the steel screw press. For cloths that pair with either press, see our cheesecloth for straining milk picks.

Warranty and listing gaps to check

No listing here states a warranty term in years, months or days. The OXO listing describes maker help if an issue comes up with the product, but states no term, so it counts as no stated warranty term for scoring. The PetriStor and SAEHAEYEE listings state no warranty term at all.

Three gaps deserve a check before ordering. The OXO example is a cookie press, not a cheese press, so it cannot support a cheese claim for the lever side. The SAEHAEYEE listing gives the Large capacity as both 2 lbs and 35 oz, which do not match, so confirm the size before ordering. The PetriStor mold-size line is hard to parse, so rely on the stated diameters: 6.2 in for the included molds and up to 11 inches for an installed mold.

Which should you choose?

Pick the lever side, through the PetriStor example, if the goal is pressing larger cheese rounds with hanging weights and a stated pressure figure up to 400 pounds. Pick the screw side, through the SAEHAEYEE example, if the goal is small batches of tofu, paneer or queso fresco in a compact steel press with an adjustable screw and a drip tray. Skip the OXO example for cheese entirely: it is a lever cookie press.

Before ordering, check the listing gaps above: mold diameter, size wording and the absence of a stated warranty term.

Around the Barn

  • Hang weights from the notches on the PetriStor lever, and use the stabilising base when pressing with a bigger load.
  • Set the screw press over its drip tray so drained liquid runs into the tray, not onto the counter.
  • Take the screw press apart for cleaning: the listing states all components are dishwasher safe.
  • Wash the cookie press by hand: the OXO listing states hand wash only.

FAQs from goat keepers

Should I pick a lever or a screw cheese press?

It depends on batch size. The lever PetriStor example suits larger cheese rounds, with molds of 6.2 in diameter and pressure up to 400 pounds. The screw SAEHAEYEE example suits small batches, with a Large capacity of 2 lbs at 6.3 by 4.7 in and an adjustable screw knob.

How much pressure does the lever cheese press state?

The PetriStor lever press states pressure up to 400 pounds of piston pressure. The screw press states no pressure figure in pounds, so the listings do not support a pressure ranking across the two sides.

Can the screw press make cheese, or only tofu?

The SAEHAEYEE listing names tofu first, but also lists a paneer maker, a fresh cheese press for queso fresco, a Greek yogurt strainer and a meat presser among its uses. Its Large size gives a 2 lbs capacity, so it suits small fresh cheeses rather than large aged rounds.

Is the OXO lever press a cheese press?

No. The OXO listing describes a cookie press set with 12 stainless steel disks for spritz cookies, pressed with a lever and kept steady by a non-slip base. It shows lever motion, but it states no cheese mold and no cheese pressure figure.

SAEHAEYEE Screw Press
Still deciding? Our top pickSAEHAEYEE Screw Press
Check price on Amazon

Behind the Farm Score

The GoatGear Score weighs performance, build, value, safety and warranty. For presses, performance means mechanism, mold size or capacity and stated pressure where a listing gives one; build means the stated material and box contents; value means what the listing gives for its stated specs. Safety means stated food-contact and stability features: food-grade 304 stainless steel and BPA-free construction on the screw press, a stabilising base on the lever cheese press, and a non-slip base on the cookie press. None of the three states a warranty term, so warranty scores stay at zero here. How we pick explains the weights.

Product GoatGear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
SAEHAEYEE Screw Press 9.6 29 22 21 7 0
PetriStor Lever Press 9.6 32 21 21 4 0
OXO Lever Cookie Press 9.3 21 19 18 3 0

We translate each weighted point total onto the 9.2 through 9.8 band; ranks never flip, because the conversion is linear.

More from the barn

See every cheese making kit guide and all milking guides.

More picks: stainless steel cheese press, cheese mold for queso fresco, cheesecloth for straining milk and square cheese press.