Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Nipple Waterer vs Bowl Waterer: Which One Should You Buy?

Nipple waterer vs bowl waterer: why nipple kits keep water cleaner, and how four listings compare on pack size, mounting and drip control.

Nipple Waterer vs Bowl Waterer: Which One Should You Buy?
On this page

A frozen, algae-green water bowl in the morning is the moment the nipple waterer vs bowl waterer question answers itself: a nipple waterer keeps the water inside a closed container and dispenses it one peck at a time, while a bowl waterer sits open to bedding, dirt and droppings. For most goat and poultry setups, the nipple side wins on cleanliness, and the bowl side only wins for animals that will not learn the nipple. All four listings we compared are nipple kits marketed to poultry keepers, so this guide compares the two ideas and then ranks the actual gear on pack size, mounting, drip control and installation detail.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Nipple waterer vs bowl waterer: the short answer

A nipple waterer wins for most barns and coops. The nipple keeps dirt and bedding out of the water, the closed container means less frequent refilling, and the listings give clear installation specs: a 9mm drill bit, gravity feed or pressure at 3psi or below, and about 3 birds per nipple. A bowl waterer wins only when the animals will not learn the nipple or when you need an open surface for very young stock. None of the four listings we compared is a bowl, which tells you what the market actually sells for clean-water setups.

If you would rather go straight to scored picks, our best automatic waterer for hobby farms roundup scores four waterers on these same points.

The gear: four nipple kits compared

Listing Pack Nipple type Install detail
RentACoop horizontal nipples 6 pack Horizontal, with dribble dish 9mm drill bit, installation tool included
MEWTOGO nipples 20 pack Automatic nipple Drill bits included, threads into thin or rigid plastic
Eggluuz horizontal nipples 8 pack Horizontal side mount Drill bit included, wingnut leak-proof fastening
KISEER nipples 30 pack Vertical, no drip cup Installs vertically into PVC or with tees and Teflon tape

RentACoop DIY waterer kit, 6 pack

The RentACoop kit is the most detailed listing of the four. It ships 6 horizontal nipples with dribble dishes plus an installation tool, lists a 55 gallon capacity and a 16 ounce item weight, and gives the clearest install spec: a 9mm drill bit, gravity-fed systems recommended or pressure regulated to 3psi or below. The bullets also say horizontal nipples suit the lifetime of the flock, covering chickens, turkeys, peafowl and other poultry. Dribble dishes and the included tool give it the top rank.

MEWTOGO nipples, 20 pack

The MEWTOGO listing ships 20 nipples with drill bits and weighs 8.14 ounces. The bullets say the threads go into a bucket easily and work in thinner flexible plastic as well as rigid plastic, and that the nipples keep water clean by stopping birds from flicking dirt and bedding into the container. It is the biggest pack with drill bits included, which puts it second.

Eggluuz horizontal nipples, 8 pack

The Eggluuz listing ships 8 orange horizontal side-mount nipples with a drill bit included, lists a 5 gallon capacity and a 0.13 kg item weight, and describes a wingnut fastening that stops water immediately after drinking to keep coops dry. It is a straightforward horizontal kit with the least mounting detail of the drill-bit-included packs, which puts it third.

KISEER nipples, 30 pack

The KISEER listing ships 30 vertical nipples and weighs 1.6 ounces, with the maker recommending 3 birds per nipple. The bullets say the nipples screw directly into PVC pipe or use reducing tees with Teflon tape, and warn to install vertically to avoid leakage. No drip cup is included, which earns it the lowest rank of the four.

What the listings agree on

Every listing sells the same idea: a closed container with nipples keeps water cleaner than an open bowl. Pack sizes run from 6 to 30 nipples, all four use drill-bit installation into a bucket or pipe, and the makers consistently recommend about 3 birds per nipple. None of the four states a warranty term, a price or a review count, so the ranking rests on stated pack contents, mounting detail and drip control.

Installation notes

Pick the container before the kit. The RentACoop listing specifies a 9mm drill bit and gravity feed or pressure at 3psi or below, the MEWTOGO listing says thinner flexible plastic works as well as rigid, and the KISEER listing warns to install vertically to avoid leakage. Mount the container where the animals already gather, keep the nipples at beak or mouth height for the smallest animals, and check the wingnut or thread seal on the Eggluuz and KISEER listings after the first fill.

For the container itself, our rubber vs plastic water trough guide compares the two trough materials if you want an open option alongside the nipples.

Read the listing twice

Nipple listings are thin on contradictions, but they are thin on numbers too:

  • RentACoop: lists a 55 gallon capacity, which describes the container you build, not the nipples themselves.
  • MEWTOGO: states no capacity and no mounting height, only pack count and drill bits.
  • Eggluuz: lists a 5 gallon capacity, which again describes your container, not the kit.
  • KISEER: gives the clearest stocking figure at 3 birds per nipple, but no drip cup.

Measure your container before ordering and treat capacity figures as describing your build, not the nipple kit.

What this guide does not cover

This guide covers watering hardware only. It does not cover how much water a goat or chicken needs, heated winter waterers or any health question. Ask your veterinarian or local extension office about animal water needs and winter watering.

FAQs from goat keepers

Which is better for goats: a nipple waterer or a bowl waterer?

A nipple waterer wins on cleanliness: the water stays inside a closed container instead of sitting open to bedding and dirt. A bowl only wins for animals that will not learn the nipple.

How many nipples do I need?

The KISEER listing recommends 3 birds per nipple. The packs here run 6, 8, 20 and 30 nipples, so match the pack to your flock size.

What do I need to install a nipple kit?

A container and a drill. The RentACoop listing specifies a 9mm drill bit and includes an installation tool, while the MEWTOGO and Eggluuz listings include drill bits.

Do nipple waterers drip?

The RentACoop kit adds a dribble dish to catch drips, and the Eggluuz listing describes a wingnut fastening that stops water after drinking. The KISEER kit includes no drip cup.

Can nipples run on pressurized water?

The RentACoop listing recommends gravity-fed systems or pressure regulated to 3psi or below. Check your own pressure before connecting a kit to a line.

More from the barn

See every water trough guide and all feeding and water guides.

More picks: automatic waterers for hobby farms, rubber vs plastic water buckets and heated bucket vs automatic waterer.