Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

T Post vs Fiberglass Post: Which One Should You Buy?

T post vs fiberglass post: steel T post listings compared by length, steel thickness, coating and spacing, with what fiberglass posts add and how to choose.

T Post vs Fiberglass Post: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1EFencSolv Step-In Electric Fence PostsEFencSolv Step-In Electric Fence Posts9.7/10View on Amazon
  2. 2MIWEVRO 4FT Heavy Duty U-Post Metal Fence PostsMIWEVRO 4FT Heavy Duty U-Post Metal Fence Posts9.6/10View on Amazon
  3. 3Toriexon 50 PCS Electric Fence Step-In Posts 3/8 x 50 inchToriexon 50 PCS Electric Fence Step-In Posts 3/8 x 50 inch9.6/10View on Amazon
  4. 410 PCS Electric Fence Posts10 PCS Electric Fence PostsView on Amazon
  5. 530 PCS Electric Fence Posts30 PCS Electric Fence PostsView on Amazon
  6. 6HIDALIFE Temporary Fence with PostsHIDALIFE Temporary Fence with PostsView on Amazon
  7. 7Temporary Fence with PostsTemporary Fence with PostsView on Amazon
  8. 820 Pcs 46"Fiberglass Step in Electric Fence Posts20 Pcs 46"Fiberglass Step in Electric Fence PostsView on Amazon

The t post vs fiberglass post question comes down to strength against conductivity. A steel T post or U post, the kind all eight listings in our reference set describe, gives maximum rigidity and a no-dig anchor for wire fence. A fiberglass post gives no conductivity at all, which matters for electric fence, plus light weight and no rust. For goat fence, most keepers pick steel T posts for permanent wire runs and reserve fiberglass for electric or temporary fence.

Also worth comparing

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

T post vs fiberglass post: the short answer

Pick steel T posts when the fence is permanent wire fence that must stand up to pressure: the listings describe 0.08 in (2 mm) steel, anchor plates, and rust protection stated to last more than two years of outdoor use on the FOREHOGAR example. Pick fiberglass when the fence carries electric wire, when you move fence often, or when rust is the enemy: fiberglass cannot rust and cannot carry current, so it suits electric paddock fence. No fiberglass listing appears in our reference set, so the fiberglass side is explained without figures while every number below comes from a steel T post listing.

What a steel T post is, by the listings

Shape and sizes

The listings describe T posts and U-channel posts interchangeably: a steel stake with tabs or studs that grip the wire, driven into the ground with no digging. Stated lengths run from 4 ft on the ARIFARO and LYDTICK examples to 4.8 ft on the Toriexon and FOREHOGAR examples, 5 ft on the MIWEVRO example, 6 ft on the VEVOR example and 7 ft on the FOREHOGAR and CLEASO examples. Pack counts are 10 on most listings and 15 on the FOREHOGAR 4.8 ft example. The ARIFARO listing offers 3, 4, 4.8, 5, 6 and 7 ft lengths, the widest stated range here.

Steel thickness and weight

The Toriexon listing states 0.08 in (2 mm) rugged steel and the VEVOR listing states 2 mm Q235 carbon steel, so read thickness as the strength figure. Package weights run from 22.9 pounds on the FOREHOGAR 8-pack of 7 ft posts to 36.1 pounds on the CLEASO 10-pack of 7 ft posts, with the VEVOR 10-pack of 6 ft posts at 24.3 pounds. Heavier steel resists bending under pressure, which is the T post’s main job.

What fiberglass posts offer

No conductivity

Steel conducts electricity, so a T post needs insulators wherever electric wire passes, as our best electric fence insulators for t posts explains. Fiberglass is an insulator by nature: electric wire can tie straight to the post with no insulator. For electric paddock fence, that removes a whole part from the shopping list.

No rust and light weight

The steel listings fight rust with powder coating and, on the FOREHOGAR example, hot dipped galvanizing under the powder coat. Fiberglass never rusts at all, so it suits wet ground where steel needs its coatings most. It is also far lighter per post than the steel examples, which matters when fence moves often, though no fiberglass weight is stated in our reference set.

Driving and spacing

No-dig installation

Every steel listing here is no-dig: drive the post with a hammer or post driver until the anchor plate sits below ground level. The FOREHOGAR 7 ft example fixes 1.2 ft of its length in the ground, leaving 5.8 ft above for wire. A dedicated driver speeds the job; see our best t post driver for clay soil.

How far apart

The FOREHOGAR listings recommend posts spaced about 7 ft (2.1 m) apart, with a 4 ft height wire fence on the 4.8 ft posts and a 6 ft height wire fence on the 7 ft posts. The tabs are stated to match a 2 by 3 in fence hole on welded wire. Space tighter where goats push and lean, wider on straight runs.

Materials and coatings

Steel posts arrive powder-coated on nearly every listing, and the FOREHOGAR example adds hot dipped galvanizing inside the powder coat, with stated outdoor life of more than two years. The VEVOR listing states UV protection in its powder coat. Fiberglass needs none of this: the material itself is the protection. Read the coating line on any steel listing, since it is the whole rust story.

What this guide does not cover

This guide does not cover wooden posts or concrete-set gate posts, which are a different job. It does not rate specific fiberglass posts, since our reference set holds steel listings only. For garden wire runs, see our best t post for garden fence.

FAQs from goat keepers

Can I use T posts for electric fence?

Yes, with insulators. The steel conducts, so every electric wire needs an insulator at each post, while fiberglass posts need none. Our insulator guide lists options sized for T posts.

How deep do T posts go?

The listings say to drive the post until the anchor plate is below ground level, with no digging. The FOREHOGAR 7 ft example fixes 1.2 ft of its length in the ground, leaving 5.8 ft above for the wire.

How far apart should fence posts be?

The FOREHOGAR listings recommend about 7 ft (2.1 m) spacing, with a 4 ft wire fence on 4.8 ft posts or a 6 ft wire fence on 7 ft posts. Space tighter where goats press against the fence.

Do steel T posts rust?

They can, so the listings state powder coating, and the FOREHOGAR example adds hot dipped galvanizing with stated outdoor life of more than two years. Fiberglass never rusts.

What does 0.08 in steel mean?

It is the stated steel thickness on the Toriexon and VEVOR listings, about 2 mm. Thicker steel resists bending; it is the strength figure to compare between listings.

More from the barn

See every goat fencing guide and all fencing and shelter guides.

More picks: t posts for garden fence, electric fence insulators for t posts, t post drivers for clay soil and fence post drivers for wood posts.