
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
MIWEVRO 4FT Heavy Duty U-Post Metal Fence Posts9.6/10View on Amazon - 2
20 Pcs 46"Fiberglass Step in Electric Fence PostsView on Amazon - 3
Gallagher 3/8" x 48" Fiberglass Step-in Fence PostsView on Amazon - 4
48 in Electric Fiberglass Fence Post 20-Pack Big InsultorView on Amazon - 5
20-Pack 46" Fiberglass Step-in Electric Fence PostsView on Amazon - 6
Fiberglass Step-in Posts 66-Inch Double Spikes 55 PostsView on Amazon - 7
50 Pack 48 inch Fixed Insulator Electric Fiberglass FenceView on Amazon
Fiberglass step-in posts are stiffer and last longer in sun; plastic step-in posts are cheaper and fine for short-term use. That is the core of fiberglass vs plastic step in posts: fiberglass for durability, plastic for economy. For a rotational grazing fence that stays up all season, fiberglass wins; for a weekend pen or garden boundary, plastic does the job.
Also worth comparing
20 Pcs 46"Fiberglass Step in Electric Fence PostsCheck price on Amazon
Gallagher 3/8" x 48" Fiberglass Step-in Fence PostsCheck price on Amazon
48 in Electric Fiberglass Fence Post 20-Pack Big InsultorCheck price on Amazon
20-Pack 46" Fiberglass Step-in Electric Fence PostsCheck price on Amazon
Fiberglass Step-in Posts 66-Inch Double Spikes 55 PostsCheck price on Amazon
50 Pack 48 inch Fixed Insulator Electric Fiberglass FenceCheck price on Amazon
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
Fiberglass vs plastic step in posts: the short answer
Buy fiberglass step-in posts if the fence stays up for months: the listings show solid fiberglass that will not rust, splinter or weaken in sunlight, in heights from 45.3 to 66 inches and packs of 4 to 55. Buy plastic step-in posts if the fence goes up and comes down quickly: the Zareba polypropylene listing gives 4-foot posts in a 50 pack with 8 molded clips, 39 inches above ground when installed. Fiberglass costs more per post; plastic costs less and replaces easily.
What fiberglass step-in posts do
A fiberglass step-in post is a rigid rod with a foot spike you press into the ground, carrying clips that hold electric wire or poly tape. The Gallagher listing describes fifty 48-inch posts molded from solid fiberglass that will not rust, splinter or weaken in sunlight, with a non-conductive shaft that resists cracking when hammered or reused. The EhuI listing gives 66-inch posts with 59 inches above ground, 5 movable clips, heavy-duty galvanized double spikes and UV-resistant fiberglass, sold as 55 posts. The Premier 1 listing takes a hybrid approach: a 48-inch post, 22 mm in diameter, with a black PVC outer over internal fiberglass cables, a 7-inch steel ground spike and a step-in footplate, sold as 4 posts for ends and corners.
Heights across the fiberglass listings run from 45.3 inches (Sunnyglade, 25 pack) to 66 inches (EhuI), with 46-inch and 48-inch the common sizes from Zoiut, BEIYI, FENSMILE and Gallagher in 20 and 50 packs. The Toriexon listing gives 3/8 by 50 inch posts with 6 wire holders in a 50 pack.
What plastic step-in posts do
A plastic step-in post works the same way but is molded from polypropylene. The Zareba listing gives 4-foot posts in a 50 pack, 39 inches above ground when installed, with 8 molded clips that hold electric fence wire and poly tape up to 2 inches wide. Plastic posts are lighter, cheaper per post, and easy to replace when one breaks. The tradeoff is stiffness: polypropylene flexes more than fiberglass, so plastic posts suit shorter runs and calmer animals better than long, high-tension lines.
Durability in sun and weather
Sunlight is the great divider. The Gallagher fiberglass listing states the posts will not weaken in sunlight, and the EhuI listing calls its fiberglass UV-resistant with reinforced ribs to stay straight. Fiberglass is also non-conductive, so it will not leak charge to ground the way a cracked plastic post can. Polypropylene degrades in UV over time, becoming brittle; a plastic post that lasts a season or two is doing its job. If your fence stays up year-round, fiberglass pays for itself in replacements you do not buy. If it goes up for a month of rotational grazing and comes down, plastic is the economical choice.
Height and wire positions
Height decides what the fence holds. The 66-inch EhuI posts with 59 inches above ground suit cattle and horses; the 45.3 to 50 inch posts suit goats and sheep. Clip count sets how many wire lines you can run: 8 molded clips on the Zareba, 6 wire holders on the Toriexon, 5 movable clips on the EhuI. More clips mean more height options for the wire, which matters when you run both a top line and a nose-height line for goats. Movable clips beat molded ones for adjusting line height without repositioning the post.
Installation: stepping in
Both types install the same way: set the spike on the ground and press with your foot. The EhuI double spikes press into hard ground, and an anti-rotation spike keeps the post from turning. The Premier 1 post uses a 7-inch steel spike with a footplate. In frozen or rocky ground, neither type drives well; that is what the post drivers in our fencing guides are for. For corners and ends, use a sturdier support post like the Premier 1 FiberTuff rather than a standard step-in, since corners carry the tension.
Which one should you buy
Buy fiberglass for any fence that stays up more than a few weeks: the UV resistance, stiffness and non-conductive shaft justify the higher price, and bulk 50 packs keep the per-post cost down. Buy plastic for temporary pens, garden boundaries and short-term rotational grazing where easy replacement beats longevity. Many goat keepers run both: fiberglass for the main paddock lines, plastic for the quick subdivisions they move every few days.
| Feature | Fiberglass step-in | Plastic step-in |
|---|---|---|
| Material | Solid fiberglass, non-conductive | Polypropylene |
| UV resistance | Stated UV-resistant; will not weaken in sunlight | Degrades over time |
| Listed heights | 45.3 to 66 in | 4 ft, 39 in above ground |
| Clips | 5 to 6 per post (listed) | 8 molded clips |
| Pack sizes | 4 to 55 | 50 |
| Best for | Season-long fences | Temporary pens |
FAQs from goat keepers
How tall should step-in posts be for goats?
The listings here run from 45.3 to 66 inches. Posts around 46 to 50 inches suit goats; the 66-inch EhuI posts suit cattle and horses.
Do fiberglass posts need insulators?
No. Fiberglass is non-conductive, so the wire clips hold the line without separate insulators. That is one of its advantages over steel posts.
How many clips do step-in posts have?
The Zareba plastic posts list 8 molded clips, the Toriexon fiberglass posts list 6 wire holders, and the EhuI fiberglass posts list 5 movable clips.
Can step-in posts hold poly tape?
The Zareba listing states its clips hold poly tape up to 2 inches wide as well as wire.
What do I use for corners?
A sturdier support post. The Premier 1 listing describes a 48-inch fiberglass-reinforced post with a 7-inch steel spike for ends, corners and directional changes.
More from the barn
See every goat fencing guide and all fencing and shelter guides.
More picks: fencing wire and fencing and shelter.
