Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Types of Wire Cutters for Fence and Farm Work

Types of wire cutters for fence and farm work, from diagonal cutters to CoBolt and cable cutters, compared on stated cutting capacity, steel, hardness and grip.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

Types of Wire Cutters for Fence and Farm Work
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1KNIPEX 71 32 200 CoBolt CutterKNIPEX 71 32 200 CoBolt Cutter9.6/10View on Amazon
  2. 2Guanlotion Cable CutterGuanlotion Cable Cutter9.6/10View on Amazon
  3. 3WORKPRO 6-Inch Diagonal CuttersWORKPRO 6-Inch Diagonal Cutters9.5/10View on Amazon
  4. 4KNIPEX 8-Inch Diagonal CuttersKNIPEX 8-Inch Diagonal Cutters9.4/10View on Amazon

A goat leaning on a fence line worries the weak wire loose while a loose strand hangs in the pen. Types of wire cutters decide how fast that strand comes off. This guide covers diagonal, high-leverage diagonal, CoBolt and cable cutters, and compares 4 cutters on steel, hardness, grip and stated cutting capacity.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

KNIPEX 71 32 200 CoBolt Cutter

KNIPEX 71 32 200 CoBolt Cutter

KNIPEX9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A high-leverage CoBolt cutter with a notch and spring, for bolts, nails and rivets up to 1/4 inch (6.0 mm).

Pros

  • Cuts bolts, nails and rivets up to 1/4 inch (6.0 mm) in diameter
  • Maker claims 60% less effort than conventional high leverage diagonal cutters
  • Induction hardened cutting edges at approx. 64 HRC
  • Opening spring and locking device integrated in the handles

Cons

  • No warranty term is stated; the listing says to call the vendor for warranty
  • Weighs 0.839 pounds, the highest stated weight here
Guanlotion Cable Cutter

Guanlotion Cable Cutter

Guanlotion9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 7.5 inch cable cutter for stainless steel wire rope up to 5/32 inch, with a safety lock and non-slip rubber grips.

Pros

  • Cuts cable up to 5/32 inch in diameter, stated for hard steel cable
  • Safety lock design prevents accidental opening and cutting
  • Labor-saving spring, non-slip rubber grips, ergonomic one-hand operation
  • Stated for stainless steel wire rope, clean cut without fraying

Cons

  • No warranty term is stated
  • Ships as a single cutter, no spare parts listed
  • Suits cable and wire rope, not bolts or nails
WORKPRO 6-Inch Diagonal Cutters

WORKPRO 6-Inch Diagonal Cutters

WORKPRO9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6-inch diagonal cutter in 50CrV steel with hardened cutting edges, built for cutting wires quickly.

Pros

  • 50CrV steel with heat treated and blackening surface
  • Hardened cutting edges, with heat treated hardness up to 48 HRC and high-frequency treated hardness up to 65 HRC
  • Bi-material handle for anti-slip and comfort grip
  • Fine polishing for corrosion resistance

Cons

  • No cutting capacity is stated, so the largest wire it handles is unknown
  • No warranty term is stated
KNIPEX 8-Inch Diagonal Cutters

KNIPEX 8-Inch Diagonal Cutters

KNIPEX9.4/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-inch high leverage diagonal cutter in heavy-duty chrome vanadium steel with induction hardened blades.

Pros

  • Heavy-duty chrome vanadium steel with induction hardened blades
  • High leverage 8-inch design for diagonal cutting
  • Comfortable in use, per the listing
  • Weighs 0.57 pounds

Cons

  • No cutting capacity is stated
  • No warranty term is stated; the spec table lists only the word Warranty
  • Bullets carry no cutting specs, only general claims
  • No safety lock or spring is stated

As an Amazon Associate I earn from qualifying purchases.


Also worth comparing

Types of wire cutters: the short answer

Start with what you cut. A diagonal cutter snips light wire. A high-leverage diagonal cutter adds length and leverage for thicker fence wire. A CoBolt cutter handles bolts, nails and rivets as well as wire, and a cable cutter handles wire rope and cable with a clean cut. Match the cutter to the material, then check capacity, steel, hardness and grip.

Choosing between cutter families? The wire fence cutters vs bolt cutters guide walks through the choice.

Cutter types compared

Type Example listing Stated cutting capacity Length Amazon
Diagonal cutters WORKPRO 6-inch Not stated 6-inch
High-leverage diagonal cutters KNIPEX 74 01 200 SBA Not stated 8 inches
CoBolt cutters KNIPEX 71 32 200 1/4 inch (6.0 mm) 8-Inch
Cable cutters Guanlotion cable cutter 5/32 inch 7.5 inch

Diagonal cutters

Diagonal cutters are the everyday snip at the fence line, with short angled jaws. The WORKPRO 6-inch diagonal cutter lists 50CrV steel with hardened cutting edges, heat treated hardness up to 48 HRC and high-frequency treated hardness up to 65 HRC. Its bi-material handle is listed for anti-slip and comfort grip.

High-leverage diagonal cutters

High-leverage diagonal cutters add handle length, which gives more cutting force for the same hand squeeze. The KNIPEX 74 01 200 SBA lists an 8-inch high leverage design in heavy-duty chrome vanadium steel with induction hardened blades. It weighs 0.57 pounds.

CoBolt cutters

CoBolt cutters use a lever-action design with a recess in the blade that holds thicker wires in place. The KNIPEX 71 32 200 lists induction hardened cutting edges at approx. 64 HRC and a stated capacity for bolts, nails and rivets up to 1/4 inch (6.0 mm). The maker claims 60% less effort compared to conventional high leverage diagonal cutters. An opening spring and locking device sit in the handles.

Cable cutters

Cable cutters are built for wire rope and cable, where a diagonal cutter would crush the strands. The Guanlotion cable cutter (on Amazon) lists a 7.5 inch size and a stated capacity for cable up to 5/32 inch, with a clean cut without fraying or smashing. A safety lock prevents accidental opening and cutting, and non-slip rubber grips with a labor-saving spring support one-hand operation.

The wire cutters

Each cutter below handles a step in fence work, from snipping tie wire to cutting cable.

Hardness and steel: what the listings state

Steel and hardness separate a cutter that holds an edge from one that dulls fast. The WORKPRO cutter lists 50CrV steel with heat treated hardness up to 48 HRC and high-frequency treated hardness up to 65 HRC. The KNIPEX 71 32 200 CoBolt cutter lists forged chrome vanadium heavy-duty steel, multi-stage oil-hardened, with induction hardened cutting edges at approx. 64 HRC. The KNIPEX 74 01 200 SBA lists heavy-duty chrome vanadium steel with induction hardened blades and no hardness figure. The Guanlotion cable cutter lists no steel grade and no hardness figure.

Grip, spring and lock

Handles decide how the cutter feels during a long repair. The WORKPRO cutter lists a bi-material handle for anti-slip and comfort grip. The KNIPEX 74 01 200 SBA lists comfortable use, with no grip detail. The KNIPEX 71 32 200 lists comfort grip handles with an opening spring and locking device in the handles. The Guanlotion cable cutter lists non-slip rubber grips, a labor-saving spring and a safety lock.

Read the listing twice

Wire cutter listings contradict themselves on the figures you need before ordering:

  • WORKPRO: 6-inch size in the title against 6.57 inches in length in the spec table.
  • KNIPEX 71 32 200: capacity up to 1/4 inch (6.0 mm) in a bullet against up to 52 mm diameter in another bullet.
  • Guanlotion: 7.5 inch size in the bullets against an 8 inch size in the spec table.
  • KNIPEX 74 01 200 SBA: the spec table lists the warranty description as the single word Warranty, with no term stated.

Measure your fence wire before ordering and allow for the larger figure, trusting the title and bullets over the spec table.

What this guide does not cover

This guide covers cutter hardware only, not fence layout, wire choice or any health question. For fence planning, see the best fencing wire guide, and ask your local extension office about fence design for your herd.

FAQs from goat keepers

What type of wire cutter cuts fence wire?

A diagonal cutter snips light wire, and a high-leverage one suits thicker fence wire. A CoBolt cutter also cuts bolts, nails and rivets up to 1/4 inch (6.0 mm), while a cable cutter suits wire rope up to 5/32 inch. Match the cutter to the material and check the stated cutting capacity.

What is the difference between diagonal cutters and cable cutters?

Diagonal cutters snip solid wire with short angled jaws, while cable cutters are built for wire rope. The Guanlotion cable cutter lists a clean cut without fraying or smashing for cable up to 5/32 inch. A diagonal cutter with no stated capacity, such as the WORKPRO 6-inch cutter, leaves that unstated.

How big should a wire cutter be for goat fencing?

The cutters here run from a 6-inch diagonal cutter to 8-inch high-leverage and CoBolt cutters, with a 7.5 inch cable cutter in between. Length alone does not set cutting capacity. The KNIPEX 71 32 200 lists capacity up to 1/4 inch (6.0 mm), and the Guanlotion lists up to 5/32 inch.

Do wire cutters come with a warranty?

None of the 4 cutters here states a warranty term. The KNIPEX 74 01 200 SBA lists the warranty description as the single word Warranty, and the KNIPEX 71 32 200 says to call the vendor for warranty. Check the listing before buying if a warranty term matters.

What does HRC mean on a wire cutter listing?

HRC is the hardness figure the listing states, and a higher figure means a harder edge. The WORKPRO cutter lists heat treated hardness up to 48 HRC and high-frequency treated hardness up to 65 HRC, while the KNIPEX 71 32 200 lists approx. 64 HRC. Compare HRC figures only between listings that state them the same way.

KNIPEX 71 32 200 CoBolt Cutter
Still deciding? Our top pickKNIPEX 71 32 200 CoBolt Cutter
Check price on Amazon

More from the barn

See every goat fencing wire guide and all fencing and shelter guides.

More picks: best fencing wire, best bolt cutters for barbed wire, how to use wire cutters and best goat shelter.