Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Use Wire Cutters on Fence Wire

How to use wire cutters on fence wire, with the steps for a clean cut and 4 cutters compared, from diagonal pliers to a 3-piece bolt cutter set.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

How to Use Wire Cutters on Fence Wire
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1NIKI 3-Piece Bolt Cutter SetNIKI 3-Piece Bolt Cutter Set9.7/10View on Amazon
  2. 2WORKPRO Mini Bolt Cutter 8-InchWORKPRO Mini Bolt Cutter 8-Inch9.6/10View on Amazon
  3. 3WORKPRO 7-Inch Diagonal PliersWORKPRO 7-Inch Diagonal Pliers9.5/10View on Amazon
  4. 4HURRICANE 10-Inch Tin SnipsHURRICANE 10-Inch Tin Snips9.5/10View on Amazon

A goat leans on the fence line at the morning check and a wire hangs loose, so how to use wire cutters on fence wire is the skill that puts the line right again. The short answer is to match the cutter to the wire, grip the handles with both hands, seat the wire deep in the jaws and squeeze in one steady motion, then check the cut end for a sharp point. This guide walks through those moves and compares the cutters in our gear section, from a bolt cutter set to a pair of tin snips that belongs on sheet metal.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

NIKI 3-Piece Bolt Cutter Set

NIKI 3-Piece Bolt Cutter Set

NIKI MOTORSPORTS9.7/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 3-piece set with a 14-inch bolt cutter, an 8-inch mini bolt cutter and a 7-inch cable shear in a carrying bag.

Pros

  • 14-inch bolt cutter, 8-inch mini cutter and 7-inch cable shear in one set
  • Drop-forged Cr-V steel stated for the cutters
  • Carrying bag included for the 3 cutters
  • Cuts chain link fences, barbed wire and steel mesh per the listing

Cons

  • No weight is stated for the set
  • No warranty term is stated
  • The 7-inch shear is listed for copper and aluminum wiring rather than fence wire
  • No cutting capacity in millimeters is stated
WORKPRO Mini Bolt Cutter 8-Inch

WORKPRO Mini Bolt Cutter 8-Inch

WORKPRO9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An 8-inch mini bolt cutter in drop-forged steel with a stated 2.3mm max cutting capacity.

Pros

  • Max cutting capacity of 2.3mm stated
  • Drop-forged steel, heat treated, up to 65 HRC
  • PP+TPR rubber handles with built-in handle lock
  • 8-inch size fits a tool bag per the listing

Cons

  • No warranty term is stated
  • Cutting locks is not recommended per the listing note
  • Single cutter only, no second size in the box
WORKPRO 7-Inch Diagonal Pliers

WORKPRO 7-Inch Diagonal Pliers

WORKPRO9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

7-inch diagonal pliers in 50CrV steel with hardened cutting edges for quick wire cuts.

Pros

  • 50CrV steel with heat treated, hardened cutting edges
  • Hardness up to 48 HRC, high-frequency treated to 65 HRC
  • Bi-material handle for anti-slip and comfort grip
  • Listed as ideal for cutting wires quickly and effectively

Cons

  • No warranty term is stated
  • No cutting capacity in millimeters is stated
  • No hanging hole or handle lock is stated
HURRICANE 10-Inch Tin Snips

HURRICANE 10-Inch Tin Snips

HURRICANE9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

10-inch straight-cut tin snips in Cr-V steel for thin sheet metal, not fence wire.

Pros

  • Cuts up to 20-gauge cold rolled steel and 22-gauge stainless steel
  • Cr-V steel blades with micro-serrations to grip metal
  • Non-slip Tyregrip handle with a hanging hole
  • Manual safety latch and self-opening spring stated

Cons

  • Made for sheet metal, not fence wire
  • Listing warns against wire mesh, metal rods and hardened steel
  • No warranty term is stated
  • Not intended for tight circles or sharp angles

As an Amazon Associate I earn from qualifying purchases.


Also worth comparing

How to Use Wire Cutters on Fence Wire: The Short Answer

Start by finding the wire you need to cut and clearing the area around it so the handles can swing free. Pick the cutter that matches the wire: diagonal pliers for light wire, a mini bolt cutter for thin bolts and cables, and the large bolt cutter in the set for chain link and barbed wire. Hold the cutter with both hands, seat the wire deep in the jaws near the pivot, and squeeze in one steady motion rather than jerking the handles. Let the cut piece fall clear, then look at the cut end and fold any sharp point flat with the pliers so no goat catches a cheek on it.

If you are planning the whole fence job, our tools for fence installation guide covers stretchers and twisters that pair with these cutters.

Cutter Types in This Guide

Type Example listing Stated for Stated capacity Amazon
Diagonal pliers WORKPRO 7-Inch Diagonal Pliers Cutting wires quickly Not stated
Mini bolt cutter WORKPRO Mini Bolt Cutter 8-inch Thin bolts, wires, cables 2.3mm max
Bolt cutter set NIKI 3-Piece Bolt Cutter Set Chain link fences, barbed wire Not stated
Tin snips HURRICANE 10-Inch Tin Snips Thin sheet metal, aluminum, gutter 20-gauge steel, 22-gauge stainless steel

The diagonal pliers and the mini bolt cutter suit light wire and thin bolts, while the 14-inch bolt cutter in the NIKI set suits chain link and barbed wire. The tin snips do not belong in this group for wire at all: the HURRICANE listing states a capacity in sheet metal gauges and warns against wire mesh and metal rods.

The Gear for Fence Wire

The gear below ties straight to the steps above: the pliers and the mini bolt cutter handle the light cuts, the 14-inch bolt cutter in the set handles the heavy fence wire, and the tin snips show what to leave in the sheet metal drawer.

How to Choose Wire Cutters for Fence Wire

Match the jaws to the wire

Light wire suits the WORKPRO diagonal pliers, which the listing calls ideal for cutting wires quickly and effectively. Thin bolts, wires and cables suit the WORKPRO mini bolt cutter, which lists a max cutting capacity of 2.3mm. Chain link fences, barbed wire and steel mesh suit the 14-inch bolt cutter in the NIKI set, which the listing points at exactly those jobs. The HURRICANE tin snips (on Amazon) suit sheet metal, so leave them out of the wire work.

Check the stated capacity before you buy

The mini bolt cutter lists 2.3mm, and the tin snips list 20-gauge cold rolled steel and 22-gauge stainless steel. The diagonal pliers and the NIKI set state no capacity in millimeters, so read their bullet lists for the jobs they name instead of guessing a size. If a listing gives no capacity, pick the larger cutter in the set rather than forcing the small one.

Handles, locks and storage

Handles decide how long you can cut without sore hands. The WORKPRO mini bolt cutter lists PP+TPR rubber handles, the diagonal pliers list a bi-material handle, and the NIKI set lists insulated ergonomic handles with an anti-slip grip. For storage, the mini bolt cutter carries a built-in handle lock, the tin snips carry a manual safety latch and a hanging hole, and the NIKI set ships with a carrying bag. A cutter that locks shut is the one to reach for when goats nose around the tool shelf. For the rest of the fence job, heavy duty fence staples and crimp sleeves for high tensile wire cover the fasteners these cutters work beside.

FAQs from goat keepers

What size wire cutter do I need for fence wire?

It depends on the wire. The WORKPRO mini bolt cutter lists a max cutting capacity of 2.3mm, which suits thin bolts, wires and cables. For chain link fences and barbed wire, the listing for the NIKI set points to its 14-inch bolt cutter.

Can tin snips cut fence wire?

Not according to the listing. The HURRICANE snips are listed for thin sheet metal up to 20-gauge cold rolled steel and 22-gauge stainless steel, and the listing warns against wire mesh and metal rods. Use a wire cutter or bolt cutter for fence wire instead.

Do any of these cutters come with a warranty?

None of the listings in this guide states a warranty term, so check the listing again before you buy if a warranty matters to you.

What should I wear when cutting fence wire?

The HURRICANE listing advises cut-resistant gloves when using snips, and the same care suits wire cutting. The snips also carry a manual safety latch, and the mini bolt cutter carries a built-in handle lock for storage.

NIKI 3-Piece Bolt Cutter Set
Still deciding? Our top pickNIKI 3-Piece Bolt Cutter Set
Check price on Amazon

Behind the Farm Score

The GoatGear Score weighs performance, build, value, safety and warranty. For wire cutters, safety means anti-slip handles, a handle lock or a safety latch that keeps the jaws shut in storage. None of the listings in this guide states a warranty term, so no product earns warranty points. How we pick explains the weights.

More from the barn

See every fence installation tools guide and all fence post guides.

More picks: crimp sleeves for high tensile wire, heavy duty fence staples, how to remove a fence post and manual fence post drivers.