
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Fixum FM-1001 Stretcher9.7/10View on Amazon - 2
Fixum ZM Round Tensioner9.6/10View on Amazon - 3
QINGDFAFA Fence Stretcher9.5/10View on Amazon - 4
Breezliy Wire Twister9.4/10View on Amazon
A goat leaning on a sagging fence line is a familiar sight at chore time, and tools for fence installation are what put the wire back tight. A stretcher pulls chain link or woven wire taut against the posts, a twister ties the wire to the clips, and the right tool for each step keeps the job to one person. This guide compares four fence tools we looked at: three stretchers and one wire twister.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | Fixum FM-1001 Stretcher | 9.7/10 | Buy on Amazon |
| 2 | Fixum ZM Round Tensioner | 9.6/10 | Buy on Amazon |
| 3 | QINGDFAFA Fence Stretcher | 9.5/10 | Buy on Amazon |
| 4 | Breezliy Wire Twister | 9.4/10 | Buy on Amazon |

Fixum FM-1001 Stretcher
A ratcheting fence stretcher with a 9-inch rack range and a 5-degree tilted base for chain link, barbed and woven wire fences.
Pros
- Ratcheting gear and long-leverage handle pull wire with little effort
- 9-inch rack range locks wire at the tension needed
- 5-degree tilted foot and deep hook brace on posts up to 2 3/8 in
- Forged steel with a sandblasted anti-rust coating
Cons
- No warranty term is stated
- No overall length is stated
- No stated weight for the tool
- Base foot fits posts up to 2 3/8 in only

Fixum ZM Round Tensioner
A fence tensioner for 2-3/8 in OD posts with a 9-inch pull range and a self-locking linkage for one-person work.
Pros
- Self-locking linkage holds tension so both hands stay free
- 9-inch pull range with a 0 to 140-degree swing arc
- Soft rubber grip stays firm with or without gloves
- Powder-coated steel with zinc-plated hardware
Cons
- No warranty term is stated
- 1 stretcher covers panels up to 4 ft, 2 are needed up to 8 ft
- Not a post puller or a retractable device

QINGDFAFA Fence Stretcher
A heavy duty fence stretcher with a 3 to 12 in tension range and a 5-degree tilted base for chain link and woven wire fences.
Pros
- 3 to 12 in tension range adapts to different fence sizes
- 5-degree tilted base improves leverage and stability
- Hooked groove locks onto wire to prevent disengagement
- Suits chain link, woven wire, livestock and field fencing
Cons
- No warranty term is stated
- No stated weight for the tool
- No post size limit is stated
- No handle length is stated

Breezliy Wire Twister
A 3-hole wire twister in steel, sized at 9.4 inches, for twisting fence wire and T-post clips.
Pros
- 3 holes in different diameters suit U-wire of different diameters
- Twists more than one wire at the same time
- Steel build resists corrosion and rust
- Second head fixes T-post fence wire clips
Cons
- No warranty term is stated
- No stated weight for the tool
- No grip material is stated
- Package holds one twister
As an Amazon Associate I earn from qualifying purchases.
Also worth comparing
10 Inch Multi Fencing Pliers ToolCheck price on Amazon
300Pcs Wire Cage Clips With Tool Hog Ring Plier for AnimalsCheck price on Amazon
T-Post Clips Tool for T Post Clips Fence Installation &Check price on Amazon
2PCS 10inch Fencing PliersCheck price on Amazon
Bates- Multi-Plier Fence ToolCheck price on Amazon
Channellock 85 10-1/2in. Fence Tool PlierCheck price on Amazon
Tools for fence installation: the short answer
Start with a stretcher that fits the posts and pulls the wire tight, then add a twister for the clips. The Fixum FM-1001 stretcher pulls with a ratchet and a 9-inch rack range, the Fixum ZM tensioner locks under tension so both hands stay free, the QINGDFAFA stretcher (on Amazon) covers a 3 to 12 in tension range, and the Breezliy twister (on Amazon) twists wire and fixes T-post clips. Match the tool to the post size and the wire, and check the pull range before ordering.
The tools for fence installation
Each tool below handles one step of the job: the stretchers pull the wire taut against the posts, and the twister ties the wire to the clips.
How to choose the best tools for fence installation
Step 1: Match the stretcher to the posts
Post size decides which stretcher seats right. The Fixum ZM tensioner fits 2-3/8 in OD posts, with a ring inside diameter of 2.44 in, and it seats on terminal and gate posts. The Fixum FM-1001 stretcher has a 2 5/8 in angled base foot that fits round or square posts up to 2 3/8 in. The QINGDFAFA stretcher lists no post size limit, so check the listing against the posts on the fence line before ordering.
Step 2: Check the pull range
Pull range decides how much slack the tool can take up in one set. The Fixum FM-1001 stretcher lists a 9-inch rack range, and the Fixum ZM tensioner lists a 9-inch pull range with a 0 to 140-degree swing arc. The QINGDFAFA stretcher lists a 3 to 12 in adjustable tension range instead of a pull figure, so compare the range against the slack in the wire. For panels, the Fixum ZM listing says to use 1 stretcher for panels up to 4 ft, or 2 for up to 8 ft.
| Tool | Stated range | Stated length | Amazon |
|---|---|---|---|
| Fixum FM-1001 stretcher | 3 to 12 in tension range | Not stated | View on Amazon |
| Fixum ZM tensioner | 9 in pull range | 17 in overall, 12 in handle | |
| QINGDFAFA stretcher | 3 to 12 in tension range | 17.2 by 5.4 by 2.01 in | |
| Breezliy wire twister | 3 holes | 9.4 in | View on Amazon |
Step 3: Twist and tie the wire
Once the wire is taut, it needs tying to the posts and clips. The Breezliy twister grabs and twists metal wires by holding the wire and pulling the handle, and it can twist more than one wire at the same time. Its 3 holes in different diameters suit U-wire of different diameters, and its second head fixes T-post fence wire clips. The tool measures 9.4 inches in length, which suits daily fencing twisting and repair work.
Step 4: Mind the load and the grip
Wire under tension pulls hard, so check the load figure and the grip. The Fixum FM-1001 stretcher lists a 5/8 in deep-groove hook that grips wire firmly even under 800 lbs of tension, and the hook is shaped to prevent slip-offs. The Fixum ZM tensioner lists a soft rubber grip that stays firm with or without gloves, and its listing advises wearing gloves and eye protection. Powder-coated steel with zinc-plated hardware stands up to weather and jobsite use on the Fixum ZM tensioner, while the Fixum FM-1001 stretcher lists forged steel with a sandblasted anti-rust coating.
What this guide does not cover
We do not cover fence chargers, insulators or wire choice, and we give no veterinary advice. For charger picks, see the fence charger guides, and for wire, see the fencing wire guides.
FAQs from goat keepers
What tool tightens a sagging chain link fence?
A fence stretcher with a ratchet. The Fixum FM-1001 stretcher uses a ratcheting gear and a long-leverage handle to pull wire taut, with a 9-inch rack range to lock the wire at the tension needed.
How many stretchers do I need for one fence panel?
The Fixum ZM listing says to use 1 stretcher for panels up to 4 ft, or 2 for up to 8 ft. The self-locking linkage holds the fence under tension so both hands stay free to tie tension bands.
What does a wire twister do?
It grabs and twists metal wires by holding the wire and pulling the handle. The Breezliy twister has 3 holes in different diameters for U-wire of different diameters, and its second head fixes T-post fence wire clips.
Do I need gloves when stretching fence wire?
The Fixum ZM listing advises wearing gloves and eye protection. Its soft rubber grip stays firm with or without gloves, and its non-marring contact edges help protect galvanized finishes on posts.
More from the barn
See every Fencing and Shelter guide and all Goat Keeping Guides guides. Also see our T-post driver for goat pens picks.
More picks: wire twister tool, wire twister for fence, fence crimping tool and heavy duty fence staples.
