Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Wire Fence Installation: Tools and Supplies

Wire fence installation starts with set posts and ends with wire pulled tight by a stretcher, and this guide compares 4 stretcher tools by grip, range and build.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

Wire Fence Installation: Tools and Supplies
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1HOTYELL Chain Link StretcherHOTYELL Chain Link Stretcher9.7/10View on Amazon
  2. 2BHALCVR Chain Link StretcherBHALCVR Chain Link Stretcher9.7/10View on Amazon
  3. 3Krysolad 6ft Wire Stretcher BarKrysolad 6ft Wire Stretcher Bar9.6/10View on Amazon
  4. 4Gtongoko 5-Hook Fence StretcherGtongoko 5-Hook Fence Stretcher9.5/10View on Amazon

A goat leaning on a sagging fence line is the usual sign that the wire needs pulling tight again, and the job is wire fence installation. A fence stretcher pulls the wire taut so the fence stands straight and stays tight, and the right tool for the job depends on the wire type and whether one person works alone. This guide walks through the steps in order, then compares four stretcher tools by grip, range and build.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

HOTYELL Chain Link Stretcher
HOTYELL9.7/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A ratchet fence puller with a 10 in rack and a serrated base that handles 1000 lbs of tension for one-person wire fence installation.

Pros

  • Handles 1000 lbs of tension without bending, wear or deformation
  • 10 in rack tightens and locks fence wire at any position
  • Serrated 5 degree tilted base stays locked in place while both hands are free
  • Dual-groove hook with two 5/8 in grooves centers force on the post

Cons

  • No warranty term is stated
  • No weight is stated
  • The serrated base and dual-groove hook suit posts wider than standard 2 3/8 in, so the fit depends on post width
BHALCVR Chain Link Stretcher
BHALCVR9.7/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A ratcheting fence tightener with a 3 to 9.5 in range and a tilted base for one-person chain link fence setup.

Pros

  • Ratcheting design with a 3 to 9.5 in range for fast, controlled tightening
  • 5 degree tilted base and hooked groove hold tension without slipping under heavy load
  • Works on chain link, woven wire, and barbed wire fencing
  • Forged steel build resists bending, wear, and corrosion for outdoor use

Cons

  • No warranty term is stated
  • No tension rating in pounds is stated
  • No hook count is stated in the listing
Krysolad 6ft Wire Stretcher Bar

Krysolad 6ft Wire Stretcher Bar

Krysolad9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 6 ft steel stretcher bar with 7 wedges and a double-sided hook for pulling woven wire fence tight.

Pros

  • 7 high-strength wedges in a staggered layout grip and straighten woven wire
  • Double-sided hook design gives strong grip and stretching force
  • High-quality steel with a rust-proof treated surface for outdoor use
  • Suits farms, ranches, and garden barriers as listed

Cons

  • No warranty term is stated
  • No weight is stated
  • No tension rating in pounds is stated
  • The bar is listed for woven wire, with no chain link or barbed wire use named
Gtongoko 5-Hook Fence Stretcher

Gtongoko 5-Hook Fence Stretcher

Gtongoko9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 5-hook galvanized steel fence puller, 31.5 inches long, that works with a come-along winch or ratchet puller.

Pros

  • 5 hooks apply even pulling force across the fence fabric
  • Galvanized steel construction suits repeated farm and ranch use
  • Works with a come-along winch or ratchet puller for controlled tension
  • Suits chain link fabric, welded wire, and agricultural fence systems

Cons

  • No warranty term is stated
  • No weight is stated
  • Controlled tension needs a come-along winch or ratchet puller used with the tool
  • Longer fences or heavier mesh need proper support, as the listing states

As an Amazon Associate I earn from qualifying purchases.


Wire fence installation: the short answer

Set the posts first, then unroll the wire along the line and fasten one end to a corner or end post. Hook the stretcher to the free end, pull the wire taut, and fasten it to the next post before moving on. Work one run at a time, and check the tension by eye and by hand before fastening the last ties.

Fence stretchers for the job

The stretcher does the pulling in the tensioning step: the four tools below pull woven wire, chain link, and barbed wire tight, and each one handles a different part of that step.

Match the stretcher to the wire

Start with the wire type, since each tool names the wire it grips. The Krysolad bar (on Amazon) is listed for woven wire, with 7 wedges that grip the net across its width. The Gtongoko puller (on Amazon) is listed for chain link fabric and welded wire fencing, with 5 hooks that spread the pull. The BHALCVR and HOTYELL tools are listed for chain link, woven wire, and barbed wire, so one tool covers the three wire types named in this guide.

Tool Wire types listed Grip Amazon
Krysolad stretcher bar Woven wire 7 wedges, double-sided hook
Gtongoko puller Chain link, welded wire 5 hooks
BHALCVR tightener Chain link, woven wire, barbed wire Hooked groove, tilted base
HOTYELL puller Chain link, woven wire, barbed wire Dual-groove hook, serrated base

Pick the tool that names the wire on the fence line: a woven wire bar grips the net, a hook puller spreads force across chain link fabric, and a ratchet tool centers the pull on the post.

Check the grip and the range

Grip decides whether the tool holds under tension or slips off the wire. The Krysolad bar uses 7 wedges in a staggered layout plus a double-sided hook, the Gtongoko puller uses 5 hooks for an even pull, and the BHALCVR tool (on Amazon) uses a 5° tilted base and a hooked groove that holds tension without slipping under heavy load. The HOTYELL tool uses a serrated base with a 5° tilt and a dual-groove hook, and its base stays locked in place while both hands fasten the fabric. Range decides how far the tool pulls in one setup: the BHALCVR tool lists a 3 to 9.5 in range, the HOTYELL tool lists a 10 in rack, the Gtongoko puller measures 31.5 inches long, and the Krysolad bar measures 6 ft long.

Work alone or with a helper

Two of the tools state one-person use: the BHALCVR tool for chain link fence setup, and the HOTYELL tool for one-person operation with a ratchet handle that amplifies pulling power. The Gtongoko puller works with a come-along winch or ratchet puller, so the puller and the winch work as a pair. The Krysolad bar grips woven wire with its 7 wedges while the wire is fastened. Wear gloves when handling sharp wire edges, as the Gtongoko listing advises, and keep hands clear of the wire while the tool holds tension.

Read the listing twice

Fence tool listings contradict themselves on counts, and the count is usually the detail a buyer needs first:

  • HOTYELL: Size 2 Pcs in the spec table against NumberOfItems 1 and a title that names one stretcher.
  • BHALCVR: NumberOfItems 5 in the spec table against a title that describes a single stretcher tool.

Trust the title and bullets over the spec table when the two differ. Measure the post width against the stated foot and groove sizes before ordering, since the HOTYELL foot fits posts wider than standard 2 3/8 in and its grooves measure 5/8 in.

What this guide does not cover

This guide covers stretcher tools only. It does not cover post setting, wire unrolling, or electric fence energizing. For post work, see the guide on how to put in a fence post, and for the rest of the kit, see tools for fence installation.

FAQs from goat keepers

What tool pulls wire fence tight?

A fence stretcher. The four tools in this guide pull woven wire, chain link, and barbed wire tight: a wedge bar, a hook puller, and two ratchet tighteners.

Can one person install a wire fence?

The BHALCVR and HOTYELL listings state one-person use, and the HOTYELL tool stays locked in place while both hands fasten the fabric.

What is the difference between a stretcher bar and a hook puller?

A stretcher bar grips the wire across its width: the Krysolad bar uses 7 wedges and a double-sided hook on a 6 ft bar. A hook puller grips with hooks: the Gtongoko puller uses 5 hooks on a 31.5 inch tool and works with a come-along winch.

Do fence stretchers work on barbed wire?

The BHALCVR and HOTYELL tools are listed for chain link, woven wire, and barbed wire. The Krysolad bar is listed for woven wire, and the Gtongoko puller is listed for chain link and welded wire.

HOTYELL Chain Link Stretcher
Still deciding? Our top pickHOTYELL Chain Link Stretcher
Check price on Amazon

More from the barn

See every Goat Fencing guide and all Fencing and Shelter guides.

More picks: tools for fence installation, wire twisters for fence, how to set fence posts in concrete and no climb vs woven wire fence.