Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

High Tensile Wire Fence Installation: Tools and Steps

High tensile wire fence installation, step by step: posts, wire, straining, tensioning and gates, with the tensioning tools compared.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

High Tensile Wire Fence Installation: Tools and Steps
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1MOEUFFIR 25 Inch Wire StretcherMOEUFFIR 25 Inch Wire Stretcher9.6/10View on Amazon
  2. 2BEIYI In-Line Wire Strainer KitBEIYI In-Line Wire Strainer Kit9.6/10View on Amazon
  3. 3Voefig Spring Gate Handle KitVoefig Spring Gate Handle Kit9.6/10View on Amazon
  4. 4Mindoub 6mm Wire TightenersMindoub 6mm Wire Tighteners9.5/10View on Amazon

Goats lean on a fence line all day, rub along it, and push at any wire that gives, so a high tensile wire fence installation has to start tight and stay tight. High tensile wire fence installation means setting posts, running wire along the line, straining it at the ends, tensioning each run, and tying it off so the wire holds its line through the seasons. The tools below handle the tensioning part of that job, from the strainer that holds the wire at the end post to the gate handle that keeps a spring gate shut.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

MOEUFFIR 25 Inch Wire Stretcher

MOEUFFIR 25 Inch Wire Stretcher

MOEUFFIR9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A cast wire stretcher that pulls high tensile, barbed or smooth wire tight for new runs and repairs.

Pros

  • Lifetime warranty is stated in the listing
  • Grips high tensile, barbed and smooth wire
  • Cast gripper described as strong and sturdy
  • Simple slip-in design for tightening and repair

Cons

  • Weighs 4.0 pounds
  • Ships as 1 piece
  • Tensioning only, with no insulator or strainer function
BEIYI In-Line Wire Strainer Kit

BEIYI In-Line Wire Strainer Kit

BEIYI9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

An all-in-one strainer, insulator and steel rope unit that slides over the post and holds tension on permanent high tensile electric fencing.

Pros

  • Combines insulator, strainer and steel rope in one unit
  • Fits posts with diameters up to 7.5 inches
  • UV-resistant polycarbonate insulator prevents current leakage
  • Galvanized steel frame built for high tension and outdoor use

Cons

  • No warranty term is stated
  • Pack of 10 pieces may be more than a short pen needs
  • Designed for permanent electric fencing, not a temporary line
  • Slide-on fit only suits posts within the stated diameter
Voefig Spring Gate Handle Kit

Voefig Spring Gate Handle Kit

Voefig9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A spring gate handle kit with insulated handles and screw-in anchors that keeps a fence gate closed on a 16 foot spring.

Pros

  • Spring extends to 16 feet
  • Insulated plastic handle opens and closes the gate without turning off the power
  • Kit holds 4 handles with 8 anchors
  • Galvanized materials for fence use

Cons

  • No warranty term is stated
  • Gate use only, not a line tensioning tool
  • Screw-in insulator suits wooden posts
  • No strainer or tightener function for the fence line
Mindoub 6mm Wire Tighteners

Mindoub 6mm Wire Tighteners

Mindoub9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A 70 piece set of reusable wire tighteners that take up slack on sagging wire with no cutting or splicing.

Pros

  • 70 pieces in the pack for long lines
  • Fits 12 1/2 gauge and heavier wires
  • Hot-dip galvanized finish resists rust
  • No cutting or splicing needed to tighten a loose wire

Cons

  • No warranty term is stated
  • Tightener handle is not included, though the listing describes an upgraded handle
  • Works on one wire at a time
  • Small clips suit take-up work, not full line straining

As an Amazon Associate I earn from qualifying purchases.


High tensile wire fence installation: the short answer

Set the end and corner posts first, then run the wire along the line and fix it at one end. A strainer or tensioner pulls the slack out of each run, and the wire is tied off when it sits straight and firm. Gates go in last, with a spring gate handle to keep the gate closed. A guide to installing a T post fence covers the post side of the job, while the tools in this guide cover the tensioning side.

The steps, in order

Start with the line itself: walk it, clear it, and mark where the end posts, corners and gates will sit. Set the end and corner posts solid, since every pull of the tensioner works against them. Run the wire from one end post along the line, keeping it clear of the ground and free of kinks. Fix the wire at the far end, then work back to the near end with a strainer or stretcher to take up the slack. Tie off, check the line by eye, and fit the gate with a spring handle so it closes on its own.

Each step has a tool that fits it. The strainer holds wire at the end post and keeps tension over time. The stretcher pulls a slack or sagging run back tight, which also makes it the tool for repairs. Tightener clips take up slack on a loose wire without cutting or splicing. Gate handles close the gap at the gate, where a fixed wire cannot run.

The tools compared

Tool Job on the fence line Stated size or pack Material Amazon
MOEUFFIR wire stretcher Pulls slack wire tight and repairs runs 25 inches, 4.0 pounds Cast
BEIYI in-line strainer kit Strains and holds wire at the post 10 pieces, fits posts up to 7.5 inches Galvanized steel frame
Voefig spring gate handle kit Closes a spring gate 16 feet spring, 4 handles, 8 anchors Galvanized View on Amazon
Mindoub wire tighteners Takes up slack without cutting or splicing 70 pieces, 6mm, fits 12 1/2 gauge and heavier Hot-dip galvanized metal

Sizes and capacities are the manufacturer’s numbers as each listing states them.

Tools for high tensile wire fence installation

Tensioning is the step that turns loose wire into a fence line, and each tool below handles one part of that step, from straining at the post to closing the gate.

How to choose the right tensioning tool

Match the tool to the job

A strainer suits a new run that needs holding at the post, while a stretcher suits a sagging run that needs pulling tight again. Tightener clips suit a loose wire that only needs a small take-up, and a spring gate handle suits the gate alone. A wire fence repair guide shows how a stretcher fits a repair, and wire fence cutters for high tensile wire cover the cutting side of the same job.

Check the fit before ordering

The BEIYI strainer fits posts with diameters up to 7.5 inches and slides over wood, metal or composite posts, so measure the post before ordering. The Mindoub tighteners fit 12 1/2 gauge and heavier wires, including barbed, high tensile and smooth wire. A tool that does not fit the post or the wire gauge is the wrong tool, whatever the pack size.

Count the pack against the line

The BEIYI kit holds 10 pieces, the Mindoub kit holds 70 pieces, and the Voefig kit (on Amazon) holds 4 handles with 8 anchors. A long line with many runs needs more strainers and tighteners than a short pen, so count the runs before counting the pack. The MOEUFFIR stretcher (on Amazon) ships as 1 piece, which suits a keeper who needs one repair tool rather than a box of fittings.

FAQs from goat keepers

What tools do you need for high tensile wire fence installation?

A strainer to hold wire at the post, a stretcher or tightener to take up slack, and a spring gate handle for the gate. The BEIYI kit combines an insulator, a strainer and steel rope in one slide-on unit, and the MOEUFFIR stretcher pulls slack wire tight for repairs.

Can you tension high tensile wire without cutting or splicing it?

Yes, with tightener clips. The Mindoub tighteners hook onto a loose wire and turn to take up slack, with no need to cut or splice, and they fit 12 1/2 gauge and heavier wires.

How far does a spring gate handle reach?

The Voefig spring gate handle extends to 16 feet, with the spring held inside an insulated plastic handle so the gate opens and closes without turning off the power.

What size posts does an in-line strainer fit?

The BEIYI strainer fits posts with diameters up to 7.5 inches, in wood, metal or composite, and slides on with no wire tying or special tools.

Do these tensioning tools carry a warranty?

Only one listing states a warranty term: the MOEUFFIR stretcher carries a lifetime warranty. The other listings state no warranty term.

MOEUFFIR 25 Inch Wire Stretcher
Still deciding? Our top pickMOEUFFIR 25 Inch Wire Stretcher
Check price on Amazon

More from the barn

See every fence charger guide and all electric fence charger installation guides.

More picks: crimp sleeves for 12 1/2 gauge high tensile wire, how to install a T post fence, how to use a post driver and wire fence repair.