Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

How to Use Post Driver on Fence Posts Step by Step

How to use a post driver in plain steps: set the post, fit the driver over the top, lift and drop in rhythm, and check the post until it stands straight and firm.

How to Use Post Driver on Fence Posts Step by Step
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1FOREHOGAR Fence Post Driver with Handle 12LBFOREHOGAR Fence Post Driver with Handle 12LB9.7/10View on Amazon
  2. 2Insaga Enhance Fence Post Driver with Anti-Slip HandlesInsaga Enhance Fence Post Driver with Anti-Slip Handles9.7/10View on Amazon
  3. 3XtremepowerUS 52cc Gas Post DriverXtremepowerUS 52cc Gas Post Driver9.7/10View on Amazon
  4. 41 Pack 24 Inch Black Fence Post Driver with Handle 34LB Iron1 Pack 24 Inch Black Fence Post Driver with Handle 34LB IronView on Amazon
  5. 5MTB Supply 1 Pack 24 Inch Black Fence Post Driver with HandleMTB Supply 1 Pack 24 Inch Black Fence Post Driver with HandleView on Amazon
  6. 6MTB Supply 1 Pack 24 Inch Fence Post Driver with Handle 12LBMTB Supply 1 Pack 24 Inch Fence Post Driver with Handle 12LBView on Amazon
  7. 7Gtongoko 12LB T Post Driver with HandlesGtongoko 12LB T Post Driver with HandlesView on Amazon
  8. 8Gtongoko 8LB T Post Driver with HandlesGtongoko 8LB T Post Driver with HandlesView on Amazon
  9. 9Gtongoko 18LB T Post Driver with HandlesGtongoko 18LB T Post Driver with HandlesView on Amazon

A goat leaning on a fence post at the morning check is the usual sign that a post needs setting, and the fence line will not wait for a better day. Learning how to use post driver tools starts with setting the post where it belongs, fitting the driver over the top, and lifting and dropping the weight in a steady rhythm until the post stands straight and firm. This guide walks through each step with the hand and gas drivers the listings state, from a steel hand pounder to a gas driver with sleeves.

Also worth comparing

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

How to use post driver: the short answer

How to use post driver tools is a short job with a fixed order. Set the post in the ground where the fence line runs, fit the driver over the top of the post, lift the driver and let it drop, and check the post after a run of drops to see that it still stands straight. A hand driver does the work with its own weight, while a gas driver adds engine power and a set of sleeves that fit around posts of more than one size. The listings in this guide state hand drivers at 12 lb and 17 lb, and gas drivers at 1900W and 1200W.

The rest of the job is matching the tool to the post. Sleeve sets in the listings run from 49mm to 100mm, and one hand driver states an interior of 2.7 inches in diameter and 11 inches deep, so a driver that fits the post head will sit square and drive straight. A driver that is too wide will wobble, and a driver that is too narrow will not fit at all. Check the fit before the first drop.

Two kinds of post driver

Post drivers fall into two groups in the listings: hand drivers that work by weight alone, and gas drivers that add an engine, a fuel tank and a set of sleeves. A hand driver suits a short run of posts near the barn, while a gas driver suits a long fence line where the ground is hard and the posts keep coming.

Hand post drivers

A hand post driver is a steel tube with handles that drops over the top of the post. The YOHSUGO driver (on Amazon) weighs 12 lb, stands 17 inches tall, and carries handles set at a 160-degree angle that the listing says promote a natural grip. The yarlung driver (on Amazon) weighs 17 lb, measures 9 inches wide by 17 inches tall, and states an interior of 2.7 inches in diameter and 11 inches deep. The iHYTOON driver (on Amazon) is a heavy-duty steel hand pounder with an open-head design for standard steel T-posts. All three work the same way: lift, raise and drop, in the words of the YOHSUGO listing, until the post reaches the depth the fence needs.

Hand drivers ask for the most effort and give the most control. A hand driver needs no fuel, no mix and no starting, so it is ready the moment it comes off the hook.

Gas post drivers

A gas post driver adds an engine to the same lift-and-drop job. The JKCHEN PRO driver (on Amazon) is a 52cc 2-stroke gas driver that the listing rates at 1900W, 6500 RPM and 55J of impact, with 3 sleeves in 49mm, 69mm and 100mm, a 1.3L fuel tank, and a 0.6L per hour consumption rate on a 25:1 gas and oil mix. It weighs 42.0 lb and carries a 1-year warranty. The HIGOSPRO driver (on Amazon) is a 37.7cc 4-stroke gas driver rated at 1200W, 8500 RPM and 35J of impact, with 2 sleeves in 55mm and 70mm, a 0.65L fuel capacity, and a weight of 15.4 lb. It also carries a 1-year warranty, and the listing claims 40% less vibration than standard models.

Gas drivers suit long runs and hard ground, where a hand driver would take too many drops to set each post. Each listing describes the drivers as ready to use with the sleeves and tools in the box, and the HIGOSPRO listing adds that it arrives pre-lubricated from the factory. Fuel, mix and starting add chores that a hand driver never asks for, so a gas driver earns its place on a big job and stays on the shelf for a short one.

Set the post in place

Start with the post standing where the fence line runs, with the ground clear of rocks and old wire at the base. A T-post, a wooden stake or a metal pipe all take the same first step: stand the post upright, hold it plumb, and press the base into the soil so it stays put while the driver goes on. The YOHSUGO and HIGOSPRO listings say their drivers fit T-posts, wooden stakes and metal pipes. How to put in a fence post walks through the same groundwork for a goat fence.

Loose soil takes a post fast, and hard ground takes more drops, so the ground decides how long each post takes. Set the post, step back, and look down the fence line to check the spacing and the line before driving starts. A post set in the wrong spot is easy to move before the first drop and hard to move after.

Fit the driver over the post

Pick the sleeve that matches the post before the driver goes on. The JKCHEN PRO driver ships with 3 sleeves in 49mm, 69mm and 100mm, and the HIGOSPRO driver ships with 2 sleeves in 55mm and 70mm, A sleeve that fits close around the post head keeps the driver square on the post and sends each drop straight down. A sleeve that is too loose lets the driver wobble, and a sleeve that is too tight will not slide on at all. Types of fence post lists the materials and uses that decide which post goes in the ground.

Hand drivers have no sleeves to pick. The yarlung driver states an interior of 2.7 inches in diameter and 11 inches deep, which sets the size of post it will take, and the iHYTOON driver uses an open-head design that drops over standard steel T-posts. Lower the driver onto the post without lifting it: it should slide on and sit level on the post head.

Lift, drop and check

The driving motion is the same for every hand driver in the listings: lift, raise and drop, in the YOHSUGO listing’s words, with the handles held firm and the driver kept square over the post. Lift the driver clear of the post head, let it fall under its own weight, and repeat until the post reaches the depth the fence needs. A steady rhythm beats hard swings. The YOHSUGO listing recommends gloves during use, and the iHYTOON listing notes handles placed to cushion vibration, so grip and gloves matter on a long run of posts.

Check the post after a run of drops, before it goes too deep to adjust. Look at the post from two sides to see whether it leans, and look down the fence line to see whether it sits in line with its neighbors. A post that leans can be pulled back and driven again while it is still shallow. Manual T post driver covers the same lift-and-drop motion in more detail, and best T post driver for fence repairs compares drivers for repair work.

Match the driver to the job

Weight is the simplest way to compare hand drivers. The YOHSUGO driver at 12 lb weighs less than the yarlung driver at 17 lb, and the yarlung driver hits harder with each drop for the same lift. The HIGOSPRO gas driver at 15.4 lb sits between the hand drivers on weight, while the JKCHEN PRO gas driver at 42.0 lb is the heaviest tool in the listings and needs a strong lift for every drop.

Power is the gas driver’s answer to hard ground. The JKCHEN PRO driver at 1900W and 6500 RPM with 55J of impact is the stronger of the two gas drivers on the figures the listings state, while the HIGOSPRO driver at 1200W and 8500 RPM with 35J of impact spins faster and weighs far less. Fuel capacity splits them too: the JKCHEN PRO driver carries a 1.3L tank at 0.6L per hour, and the HIGOSPRO driver carries a 0.65L tank. Pick the driver whose weight, power and sleeve sizes match the posts and the ground on the job, and the fence will go up straighter with less wasted effort.

What this guide does not cover

This guide covers driving a post with a hand or gas post driver, and it stops there. It does not cover setting posts in concrete, pulling old posts out of the ground, or repairing a fence once the posts are in. It does not cover electric fence chargers, insulators or wire, and it does not cover shelters or gates. The listings in this guide state no figures for concrete, depth rules or soil types, so this guide gives none.

FAQs from goat keepers

Can a hand post driver set a T-post in hard ground?

Yes, within the limits the listings state. The iHYTOON listing says its steel pounder sinks T-posts into tough, packed soil with fewer hits, and the YOHSUGO listing says its driver helps fence posts penetrate the ground with minimal effort. For ground that will not yield, the gas listings state 1900W and 55J for the JKCHEN PRO driver and 1200W and 35J for the HIGOSPRO driver.

What size sleeve fits a standard T-post?

The listings state sleeve sets rather than one size. The JKCHEN PRO driver ships with 3 sleeves in 49mm, 69mm and 100mm, and the HIGOSPRO driver ships with 2 sleeves in 55mm and 70mm.

How heavy is a hand post driver?

The listings state 12 lb for the YOHSUGO driver and 17 lb for the yarlung driver.

Do gas post drivers need mixed fuel?

The JKCHEN PRO listing states a 25:1 gas and oil mix for its 52cc 2-stroke engine, with a 1.3L fuel tank and a 0.6L per hour consumption rate. The HIGOSPRO listing states a 37.7cc 4-stroke engine, a 0.65L fuel capacity, and that it arrives pre-lubricated from the factory with no assembly required.

Can one post driver fit wood and metal posts?

Yes, the listings say so. The YOHSUGO listing says its driver fits T-posts, wooden stakes and metal pipes, and the HIGOSPRO listing says it works with all standard T-posts in metal and wood.

More from the barn

See every Post Drivers and Pullers guide and all Fencing and Shelter guides.

More picks: manual T post driver, T post driver for fence repairs, loose fence post repair and setting fence posts in concrete.