Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Wood vs Metal Hay Feeder (2026): Which One Should You Buy?

Wood vs metal hay feeder: wood is lighter and affordable but needs indoor placement; metal parts survive chewing and weather. Here is how to choose.

Wood vs Metal Hay Feeder (2026): Which One Should You Buy?
On this page

Wood vs metal hay feeder: the short answer is that metal parts survive chewing and weather, while wood is lighter, quieter and cheaper but belongs indoors. If the feeder lives in the barn or outside, metal hardware wins. If it sits in a dry shelter, a wooden feeder like the 16.41 by 11.61 by 6.69 inch BESNEW 3-in-1 works well. Every number below comes from the reference listings, collected 19 October 2026.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Wood vs metal hay feeder: the case for wood

Wooden hay feeders are light and affordable. The andwe cylindrical feeder weighs 8 ounces and holds around 0.5 pounds of hay at 7.6 by 7.6 by 9.7 inches. The kathson standing feeder is 9.5 by 9.5 by 14.3 inches and 1.9 pounds, with a bottom tray that catches fallen hay. The Niteangel plywood manger is 9.69 by 7.91 by 7.01 inches and 1.9 pounds, with bars the listing calls the perfect width apart for easy access.

Wood is also gentler: the Unicorn Catcher listing notes wood helps preserve dental health, and wooden feeders are quieter when animals bump them. The BESNEW 3-in-1 pairs a wooden feeder with two iron bowls and a litter box at 5.47 pounds, showing how makers combine wood’s light structure with metal where it counts.

The catch is moisture and chewing. The BESNEW listings state care as Keep Indoors and Keep in a Dry Place, and Hand Wash Only is the standard wood care instruction across the listings. Goats chew wood, and wet wood rots. A wooden feeder in a dry shelter lasts; the same feeder in the rain does not.

The case for metal

Metal parts survive what wood cannot: chewing, kicks and weather. The BESNEW 3-in-1’s stainless steel mesh sits in the middle of the wooden feeder with 0.47-inch spacing, letting droppings fall through while feet stay safe, per the listing. Its two iron bowls are deep enough for clean, uncontaminated food. Metal mesh and bowls do not absorb moisture the way wood does, so cleaning is faster.

Metal is also the standard for the working parts: hinges, latches and mesh. A feeder that is all metal resists the full range of barn abuse, but it is heavier and noisier, and sharp edges need checking. The listings here show the hybrid approach winning: wooden body for light structure, metal for mesh, bowls and hardware.

Comparing the two side by side

Factor Wood Metal parts
Weight Light: 8 oz to 1.9 lb in listings Heavier: BESNEW 3-in-1 at 5.47 lb
Chewing Wears over time Survives chewing
Moisture Keep indoors and dry Resists weather
Noise Quieter Louder when bumped
Cleaning Hand wash only Faster wipe-down

Reading capacity against your herd

Capacity decides how often you refill. The andwe holds around 0.5 pounds of hay; the kathson is big enough for one day’s hay for small pets. For goats, scale up: a feeder that works for a rabbit at 9.8 by 5.1 by 7.4 inches will not serve a herd. The BESNEW’s large capacity design means fewer refills per day, per the listing. Match the feeder’s size to the number of animals, not just the species.

Mounting and where the feeder goes

Placement follows the material. Wooden feeders in the listings hang or stand: the Unicorn Catcher hangs or mounts with Y nuts, the Niteangel fastens to a cage wall with 2 screws, and the kathson stands on a base. Hang the feeder at head height so hay stays clean and animals cannot climb in. Metal-hardware feeders tolerate outdoor mounting better; wooden ones belong under cover.

What this guide does not cover

This guide compares materials only. It does not rank specific goat-sized feeders, and the reference listings are small-animal feeders used here for their stated figures. For feeder styles, see our feeding and water guides.

Around the Barn

  • Keep wooden feeders indoors and dry; the listings state Keep Indoors and Hand Wash Only.
  • Refill before the feeder runs empty: the andwe holds about 0.5 pounds, so check it daily.
  • Inspect metal mesh spacing: the BESNEW’s 0.47-inch mesh keeps feet safe while droppings fall through.
  • Use the bottom tray to catch fallen hay and cut waste, as the kathson design shows.
  • Tighten mounting screws and Y nuts monthly; hanging feeders loosen with daily use.

FAQs from goat keepers

Is wood or metal better for a goat hay feeder?

Metal parts are better for outdoor and heavy-chewing use. Wood works well in a dry shelter and is lighter and quieter.

Can a wooden hay feeder go outside?

The listings say keep wood indoors and dry. For outdoor use, choose metal hardware or a hybrid feeder.

What mesh spacing is safe?

The BESNEW listing states 0.47-inch stainless steel mesh, sized so droppings fall through without trapping feet.

How do I reduce hay waste?

Use a feeder with bars or mesh that holds hay in place and a tray that catches fallen hay, as the kathson and Niteangel designs show.

More from the barn

See every feeding and water guide and our goat hay nets category.