Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Wood vs Metal Cheese Press: Which One Should You Buy?

Wood vs metal cheese press: a BOONEVE wooden spring press, a PetriStor metal-guided press and a V TOWER wood slicer board compared on stated pressure, build, size and box contents.

Top picks

As an Amazon Associate I earn from qualifying purchases.

How we score

Wood vs Metal Cheese Press: Which One Should You Buy?
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1BOONEVE CHPR1 Wood PressBOONEVE CHPR1 Wood Press9.6/10View on Amazon
  2. 2PetriStor 35 Cheese PressPetriStor 35 Cheese Press9.5/10View on Amazon
  3. 3V TOWER CC-WG Slicer BoardV TOWER CC-WG Slicer Board9.4/10View on Amazon

After the morning milking, the pails get strained and the cheese making starts, and that is when the wood vs metal cheese press question lands on the workbench. One side presses curds inside a wooden frame with a spring or stacked weights, and the other side presses with metal guides and steel parts around the mold. We compared three listings, two tagged wood and one tagged metal, on frame material, stated pressure, size, weight and what ships in the box, using only what each Amazon listing publishes.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Quick verdict: choose the wood side if you want the highest stated pressure with a spring mechanism that holds pressure through the press, as the BOONEVE example shows with up to 210 lb of pressure and 304 stainless steel parts in a Siberian pine frame. Choose the metal side if you want the mold in the box with metal guides around the press, as the PetriStor example shows with 8 inch metal guides and a 1.2 liter mold with a follower piston at up to 50 pounds of pressure. The V TOWER listing, tagged wood, is a slicer board rather than a press, so read it as a cutting-board alternative instead of a pressing choice.

Three examples

BOONEVE CHPR1 Wood Press

BOONEVE CHPR1 Wood Press

BOONEVE9.6/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A wooden cheese press with a steel spring mechanism that the listing rates up to 210 lb of pressure, built from Siberian pine with 304 stainless steel parts.

Pros

  • Up to 210 lb of pressure with a spring mechanism that holds pressure through the press
  • Siberian pine frame with 304 stainless steel parts, sharp-cut edges to prevent splitting
  • Adjustable to any pressure: set it on a scale, press by hand, then fix the butterfly nuts
  • Lists feta, gouda, edam, emmenthal and cantal among the varieties it can make

Cons

  • No containers or molds are included; you supply your own
  • 14.57 by 5.55 by 2.76 inches, a compact footprint that limits batch size
  • No warranty term is stated
  • Installation needs the step-by-step video on the product page
PetriStor 35 Cheese Press

PetriStor 35 Cheese Press

PetriStor9.5/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A cheese press with 8 inch metal guides and a 1.2 liter food grade mold with a follower piston, rated up to 50 pounds of pressure.

Pros

  • Includes a 1.2 liter cheese form with a follower piston
  • 8 inch metal guides around an 11.2 inch round press
  • Pressure rated up to 50 pounds
  • Cheese form stated as food grade, hard polypropylene

Cons

  • One bullet says the form is 45 ounces, another says 45 pounds
  • Title says 1.3 Qt while the bullets say a 1.2 liter mold
  • No warranty term is stated
V TOWER CC-WG Slicer Board

V TOWER CC-WG Slicer Board

V TOWER9.4/10 GoatGear Score
i
The GoatGear Score runs from 0 to 10 and weighs performance (35%), build (25%), value (25%), safety (10%, where it applies) and warranty (5%), using only what the manufacturer and the listing publish. How we pick ›

A wooden cheese slicer board with a stainless steel blade and a locking design, built for slicing block cheese and butter rather than pressing.

Pros

  • Stainless steel blade on a wood board, sized for block cheese
  • Lever motion follows a fixed path for even slices
  • Locking design keeps the blade secured between uses
  • Simple to hand wash, dry and store

Cons

  • It is a slicer board, not a cheese press: no pressing pressure is stated
  • No dimensions or weight are stated anywhere in the listing
  • Suits block cheese and butter, not curd pressing
  • No warranty term is stated

As an Amazon Associate I earn from qualifying purchases.


Wood vs metal cheese press: side by side

Cheese Press GoatGear Score Frame material Stated pressure Weight Mold included Amazon
BOONEVE CHPR1 Wood Press 9.6/10 Siberian pine wood, 304 stainless steel parts Up to 210 lb 5.4 pounds Not included View on Amazon
PetriStor 35 Cheese Press 9.5/10 Wooden frame with metal guides Up to 50 pounds 2.75 pounds 1.2 liter form with piston View on Amazon
V TOWER CC-WG Slicer Board 9.4/10 Wood board, stainless steel blade Not stated; slicer, not a press Not stated No mold; slicer board View on Amazon

Figures come from the product pages and reflect what the maker rates, current as of 20 October 2026.

Frame material: what each listing states

The BOONEVE press is the clearest wood example: Siberian pine wooden parts with 304 stainless steel parts, cut with sharp edges to prevent splitting, in a spring-mechanism frame. The PetriStor listing is the muddled one. It sits in the metal-side slot, yet its own title reads Wooden Cheese Press with Metal Guides, and the bullets describe 8 inch metal guides around an 11.2 inch round press. Read it as a wooden frame with metal guides rather than an all-metal press, and settle the mismatch with the seller before you buy. The V TOWER listing is a wood board with a stainless steel blade, but it is a slicer board, not a press. A related frame-material question is covered in our wood vs plastic cheese press comparison.

Pressure: spring, weights and the slicer

Stated pressure is where the two sides split most. The BOONEVE press states up to 210 lb of pressure, applied through a steel spring mechanism that the listing says provides continuous pressure through the whole press, with no need to stack heavy items or water on the mold. To set any specific pressure, the listing describes putting the press on a scale, pressing above it by hand to the figure you want, then fixing the top butterfly nuts at that point. The PetriStor press states up to 50 pounds, with the mold and follower piston doing the pressing work. The V TOWER listing states no pressure at all, because it is a lever slicer for block cheese and butter rather than a press. For the spring-versus-weight question in more depth, see our spring vs weight cheese press comparison.

Size, weight and what ships in the box

The BOONEVE press measures 14.57 by 5.55 by 2.76 inches and weighs 5.4 pounds, a compact footprint, and the listing is explicit that containers are not included: you supply your own molds. Installation follows a step-by-step video on the product page. The PetriStor press is the round 11.2 inch model with 8 inch metal guides, 2.75 pounds, in a 12.05 by 11.81 by 3.58 inch package, and it ships with a 1.2 liter cheese form and follower piston, stated as food grade, hard polypropylene. The V TOWER board states neither dimensions nor weight; the spec table gives only brand, model CC-WG, stainless steel blade material and a Wood Guillotine color. Its box contents are the board and blade, with a locking design for storage and care that is simple to hand wash, dry and store.

Listing gaps to settle before you buy

The PetriStor listing needs the most checking. Beyond the wooden-title versus metal-side mismatch, one bullet calls the cheese form 45 ounces while another calls it 45 pounds, and the title says a 1.3 Qt mold while the bullets say 1.2 liter; read the pounds figure as the error and confirm with the seller. The BOONEVE listing is cleaner but gives no mold dimensions since none is included, the V TOWER listing gives no dimensions and no weight at all, and none of the three states a warranty term.

Which should you choose?

Choose the wood side if you want the highest stated pressure with a spring that keeps pressure steady through the press, as the BOONEVE example shows with its 210 lb figure, 304 stainless steel parts and Siberian pine frame. Keepers pressing gouda or other firm varieties can also compare our best cheese press for gouda picks.

Choose the metal side if you want metal guides with the mold included in the box, as the PetriStor example shows with 8 inch metal guides, a 1.2 liter food grade mold with a follower piston and up to 50 pounds of pressure. If you only need to portion blocks for the table, the V TOWER slicer board is the wood-side example built for that job, with a locking blade and a wood board rather than any pressing mechanism.

Around the Barn

  • Set the BOONEVE spring pressure on a scale first, pressing by hand and fixing the butterfly nuts at the mark, per the listing.
  • Hand wash, dry and store the V TOWER board with the blade locked between uses.
  • Provide your own containers for the BOONEVE press; none are included.
  • Assemble the PetriStor press and mold before the milk is ready, so nothing waits on press day.

FAQs from goat keepers

Is a wood or metal cheese press better for goat cheese?

It depends on the pressure and the batch. The wood-side BOONEVE example states up to 210 lb of pressure with a spring mechanism and lists gouda among its varieties, while the metal-side PetriStor example states up to 50 pounds of pressure and includes a 1.2 liter mold with a follower piston. Match the press to the cheese you make most.

How much pressure do these presses state?

The two press listings state different figures: the BOONEVE press up to 210 lb and the PetriStor press up to 50 pounds. The BOONEVE listing also describes setting any pressure with a scale and butterfly nuts. Use the stated figures rather than guessing.

Does the press come with a cheese mold?

Only one of the three does: the PetriStor press includes a 1.2 liter cheese form with a follower piston. The BOONEVE press states containers are not included, so you supply your own, and the V TOWER listing is a slicer board with no press at all.

Can a wooden press make hard cheeses like gouda?

The BOONEVE listing says yes for its model: it names feta, gouda, edam, emmenthal and cantal among the varieties and states up to 210 lb of pressure with a spring that holds pressure through the press. The PetriStor listing names cheddar among its uses at up to 50 pounds.

Is the V TOWER board a cheese press?

No. Its listing describes a wooden slicer board with a stainless steel locking blade for block cheese and butter, with no pressing pressure stated. It appears here only because the job tagged it as a wood-side example.

BOONEVE CHPR1 Wood Press
Still deciding? Our top pickBOONEVE CHPR1 Wood Press
Check price on Amazon

Behind the Farm Score

Product GoatGear Score Perf. /35 Build /25 Value /25 Safety /10 Warranty /5
BOONEVE CHPR1 Wood Press 9.6 30 21 20 5 0
PetriStor 35 Cheese Press 9.5 28 20 21 5 0
V TOWER CC-WG Slicer Board 9.4 23 20 18 5 0

Points become a score between 9.2 and 9.8 by simple proportion, which means a higher point count always reads higher.

The GoatGear Score weighs performance, build, value, safety and warranty. For cheese presses, safety points need stated food-safe materials or secure pressing claims: the BOONEVE claim of secure pressing with no risk of falling or spilling, the PetriStor food grade mold, and the V TOWER locking blade that stays secured between uses. None of the three listings states a warranty term, so all three score zero on warranty. The BOONEVE leads on stated pressure and its spring mechanism, the PetriStor on the included mold, and the V TOWER loses points for being a slicer board rather than a press. How we pick explains the weights.

More from the barn

See every cheese making kit guide and all milking guides.

More picks: wood vs plastic cheese press, cheese presses under 75, spring vs weight cheese press and cheese presses for gouda.