Skip to content
We independently pick everything we recommend. We earn a commission when you buy through our links, at no extra cost to you. Learn more ›
Amazon Black Friday Week deals

Dimensions of Hay Bale: Sizes for Choosing a Hay Feeder

Dimensions of hay bale means the length, width and height of a square bale or the diameter and length of a round bale, and the size decides the feeder.

Dimensions of Hay Bale: Sizes for Choosing a Hay Feeder
On this page

Top picks at a glance

As an Amazon Associate I earn from qualifying purchases.

  1. 1Harhana X Large Rabbit Hay Feeder Metal FrameHarhana X Large Rabbit Hay Feeder Metal Frame9.6/10View on Amazon
  2. 2andwe Rabbit Hay Feeder Wooden Food Feeding Rackandwe Rabbit Hay Feeder Wooden Food Feeding Rack9.6/10View on Amazon
  3. 3Unicorn Catcher Wooden Guinea Pig Hay FeederUnicorn Catcher Wooden Guinea Pig Hay Feeder9.4/10View on Amazon
  4. 4Rabbit Hay FeederRabbit Hay Feeder9.5/10View on Amazon

Hay ends up on the ground at morning milking, and the goats pick through it and leave the rest in the bedding. Dimensions of hay bale are the length, width and height of a square bale, or the diameter and length of a round bale, and the size decides the feeder and the storage. Measure the bale before you buy a feeder, and match the feeder opening and the feeder size to the bale you actually bring home.

GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.

Dimensions of hay bale: the short answer

Start with the bale shape, then the feeder. A square bale is measured by length, width and height, and a round bale by diameter and length. The feeder must take the bale’s width and height at the opening, and the storage must take the bale’s full length. The listings cited below are small-animal feeders for rabbits, guinea pigs and chinchillas; their stated sizes show how to read a feeder’s dimensions before you match a goat feeder to a goat bale.

If you would rather go straight to the products, our best hay feeder for goats roundup compares feeders on these points.

Bale shapes compared

Feeder Stated size Mounting Pack
CAIQINLI feeder 6.9 x 4.7 x 6.6 inches Hook 1 piece
Harhana X-Large feeder 9.7 x 4.7 x 6.6 inches 2 buckles and 6 straps 1 pack
Uupin hay bag 9.5 x 10.6 inches Metal hooks 2 pack
Tierecare feeder set 9 x 4 x 3 inches Hangs in cage Set of 2

Square bales

A square bale is a block of hay tied with twine and fed a flake at a time. Measure length along the bale, width across the face, and height from the ground to the top. The feeder opening must take the width and height of the flake you feed, and the storage must take the full length of the bale.

Round bales

A round bale is a roll of hay, fed from the round side. Measure the diameter across the round face and the length along the roll. A round bale needs a feeder and a storage space that take the full diameter, so measure the diameter and the length before you buy.

Feeder sizes in the listings

The listings cited state feeder sizes as length, width and height. The CAIQINLI feeder lists 6.9 x 4.7 x 6.6 inches, the Harhana feeder (on Amazon) lists 9.7 x 4.7 x 6.6 inches, and the Uupin hay bag (on Amazon) lists 9.5 x 10.6 inches. Read the figures in that order and compare them with the bale you feed.

How to measure a bale

Measure the bale where it sits, before you move it to the feeder. A tape measure and a note of the figures are all you need.

  1. Square bale: run the tape along the length, then across the width, then from the ground to the top for the height. Write each figure down as you measure it.
  2. Round bale: run the tape across the round face for the diameter, then along the roll for the length. The diameter is the figure that decides the feeder and the storage.
  3. Feeder opening: measure the opening the hay passes through, and compare it with the bale’s width and height.
  4. Storage: measure the floor space where the bale will sit, and check that the full length of the bale fits with room to walk past it.

Match the feeder to the bale

The feeder opening takes the bale’s width and height, and the feeder body holds the share of the bale you feed at a time. Read the listing’s stated size in the order it is given: length, then width, then height. A feeder listed at 9.7 x 4.7 x 6.6 inches, like the Harhana X-Large feeder, is longer than a feeder listed at 6.9 x 4.7 x 6.6 inches, like the CAIQINLI feeder, and the gap between them is the room you have for hay. The Harhana feeder hangs with 2 buckles and 6 straps, and the maker gives a 120-day warranty as standard.

Hay bags read the same way. The Uupin hay bag lists 9.5 x 10.6 inches, with 24.2cm x 27cm in the same listing, and feeding holes of 7cm x 7cm, which the listing also gives as 2.75in x 2.75in. The bag is made of 600D oxford fabric and hangs from 2 metal hooks. The andwe feeder (on Amazon) holds around 0.5 lb of hay and lists 7.6 x 7.6 x 9.7 inches, with 4 large holes on the front and a magnetic top that opens for filling.

Wood and steel feeders list the same figures. The Unicorn Catcher wooden feeder (on Amazon) lists 9.8 x 5.1 x 7.4 inches in its bullets, and the Tierecare feeder (on Amazon) set lists 9 x 4 x 3 inches and ships as a set of 2. The LUAVIARU feeder lists 7.1 x 7.1 x 4.8 inches and comes as a 2 pack with 2 hooks. Compare the stated size with your bale, and allow for the larger figure when a listing gives two sizes for the same feeder.

Check the listing figures

Hay feeder listings often contradict themselves, and the numbers that conflict are usually the ones you need to plan the install:

  • CAIQINLI 2-piece set: 6.9 x 4.7 x 6.6 inches for the big size and 6.2 x 4.4 x 6.6 inches for the small size in the bullets, against 7.5 x 5.1 x 7.0 inches in the spec table.
  • CAIQINLI hay and food feeder: 6.8 x 6.7 x 6.6 inches in the bullets against 6.7 x 4.5 x 6.5 inches in the spec table.
  • CAIQINLI feeder: 9.6 x 4.5 x 6.3 inches in the bullets against 9.8 x 4.7 x 6.2 inches in the spec table.
  • Unicorn Catcher wooden feeder: 9.8 x 5.1 x 7.4 inches in the bullets against 9.8 x 5.1 x 7.0 inches in the spec table.

Measure your feeder space before ordering and allow for the larger figure. Some listings also make health claims; we leave those out, because a feeder is equipment, not a health product.

What this guide does not cover

This guide covers feeder hardware and bale dimensions only. It does not cover how much hay a goat needs, hay types or any health question. Ask your veterinarian or local extension office about rations and goat health.

FAQs from goat keepers

How do I measure a hay bale?

Measure a square bale along its length, width and height, and a round bale across its diameter and along its length. Write the figures down and compare them with the feeder opening before you buy.

What size feeder do I need for a bale?

Match the feeder opening to the bale’s width and height, and the feeder size to the share of the bale you feed at a time. The listings cited state feeder sizes from 6.9 x 4.7 x 6.6 inches to 9.7 x 4.7 x 6.6 inches; check the listing’s stated size against your bale.

Do the listings agree on feeder size?

Not always. The CAIQINLI 2-piece listing gives 6.9 x 4.7 x 6.6 inches for the big size in its bullets and 7.5 x 5.1 x 7.0 inches in its spec table, so read the bullets and allow for the larger figure.

Can I use a small-animal hay feeder for goats?

The listings cited are made for rabbits, guinea pigs and chinchillas, and their sizes run from 6.9 x 4.7 x 6.6 inches to 9.7 x 4.7 x 6.6 inches. Use them to learn how to read feeder dimensions, then match a goat feeder to your bale and your herd.

More from the barn

See every hay feeder guide and all feeding and water guides.

More picks: best hay feeders for goats, goat mineral feeders, heated water buckets and goat shelters.