
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Insaga 13in Strap Hinges9.7/10View on Amazon - 2
Korhvante 7in Barrel Hinges9.7/10View on Amazon - 3
Insaga L-Shaped Gate Hinges9.6/10View on Amazon - 4
CTrowelpro 3.5in T Hinges9.5/10View on Amazon
A gate that sags on its hinges drags in the dirt and stops latching, and the hinge is the part that gave up first, so gate hinge ideas start with weight capacity and mounting. This guide covers the ideas by hinge type, weight capacity and mounting, with bolt-on, weld-on and strap hinges compared. The hinges below cover the job, from light T hinges for shed doors to strap hinges for heavy farm gates.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | Insaga 13in Strap Hinges | 9.7/10 | Buy on Amazon |
| 2 | Korhvante 7in Barrel Hinges | 9.7/10 | Buy on Amazon |
| 3 | Insaga L-Shaped Gate Hinges | 9.6/10 | Buy on Amazon |
| 4 | CTrowelpro 3.5in T Hinges | 9.5/10 | Buy on Amazon |

Insaga 13in Strap Hinges
A 4-pack of 13 inch strap hinges in 6mm carbon steel with ball bearings, rated to 1000 lbs per pair.
Pros
- 1000 lbs capacity per pair
- 13 inch strap with ball bearings
- Weld-on or bolt-on mounting
- 180° one-way opening for face mounting
Cons
- No warranty term is stated
- M12 bolts are recommended but not included
- No screws are included
- The 13 inch strap is sized for large gates

Korhvante 7in Barrel Hinges
A 4-pack of 7 inch weldable barrel hinges in carbon steel with ball bearings and a grease zerk, rated to 900 lbs per hinge.
Pros
- 900 lbs capacity per hinge
- Ball bearing for smooth, quiet swing
- Grease zerk for easy lubrication
- Black E-coated finish resists rust
Cons
- No warranty term is stated
- Weld-on only, with no bolt-on option
- Grease must be added through the zerk to keep the hinge smooth
- No weight figure is stated

Insaga L-Shaped Gate Hinges
A 4-pack of L-shaped bolt-on gate hinges in 6mm carbon steel with bearings, rated to 1000 lbs per pair.
Pros
- 1000 lbs capacity per pair
- 6mm carbon steel with a powder coated finish
- Built-in bearings for smooth, friction-reduced swing
- Bolt-on design, no welding required
Cons
- No warranty term is stated
- Screws are not included
- Bolt-on only, with no weld-on option
- The 8-screw mount needs 8 screws per hinge

CTrowelpro 3.5in T Hinges
An 8-pack of 3.5 inch T hinges in solid steel with screws, rated to 60 lbs, for shed doors and wooden fences.
Pros
- 8 hinges with screws in the box
- Offset screw holes help prevent wood splitting
- Countersunk holes and flat head screws for a smooth surface
- Galvanized and matte black coated for rust resistance
Cons
- Max capacity 60 lbs
- No warranty term is stated
- The 3.5 inch size is for shed doors and small gates
- No ball bearings are stated
As an Amazon Associate I earn from qualifying purchases.
Gate hinge ideas: the short answer
Start with the gate weight, then pick the mount. The Insaga strap hinges and the Insaga L-shaped hinges both carry 1000 lbs per pair, the Korhvante barrel hinges (on Amazon) carry 900 lbs per hinge, and the CTrowelpro T hinges (on Amazon) carry 60 lbs. Bolt-on hinges mount to wood, concrete or brick with no welding, weld-on hinges suit steel gates and posts, and strap hinges spread the load across a long leaf. The sections below take each idea in turn.
The gear for the job
The hinges below cover the weight, the mount and the gate.
Weight capacity decides the hinge
Capacity is stated per pair or per hinge, so read the line carefully. The Insaga strap hinges and the Insaga L-shaped hinges are rated to 1000 lbs per pair. The Korhvante barrel hinges are rated to 900 lbs per hinge on the 7 inch size, with a 5 inch option rated to 450 lbs per hinge. The CTrowelpro T hinges are rated to a max capacity of 60 lbs. A pair of hinges shares the gate weight, so the per-pair figure is the one to compare with the gate.
Bolt-on, weld-on or strap
Mounting decides the install. The Insaga L-shaped hinges bolt on to wood, concrete or brick with no welding, and screws are not included. The Insaga strap hinges weld to metal posts or bolt onto wood, with M12 bolts recommended for bolt-on use. The Korhvante barrel hinges are weld-on, with a grease zerk for lubrication after installation. The CTrowelpro T hinges bolt on with the screws in the box, 36 of 20mm and 36 of 25mm.
Bearings and smooth swing
Bearings keep a heavy gate swinging smoothly. The Insaga strap hinges use ball bearings, the Korhvante barrel hinges use a steel ball bearing with a grease zerk, and the Insaga L-shaped hinges use built-in bearings that need no ongoing lubrication. The CTrowelpro T hinges state a special treatment for bearings that keeps the door from creaking. A grease zerk lets you add lubrication after installation, which the Korhvante listing states as a way to extend service life.
Read the listing twice
The CTrowelpro title states 144 screws while the bullets list 36 screws of 20mm and 36 of 25mm, so the count in the title does not match the bullets. The Korhvante listing gives two capacity figures, 900 lbs per hinge for the 7 inch size and 450 lbs per hinge for the 5 inch size, so check which size the listing you buy is. The Insaga L-shaped listing gives a 6.5 inch size in the title, so use the title figure when you measure the gate.
FAQs from goat keepers
What size gate hinge do I need?
Match the capacity to the gate weight. The Insaga strap and L-shaped hinges carry 1000 lbs per pair, the Korhvante barrel hinges carry 900 lbs per hinge, and the CTrowelpro T hinges carry 60 lbs.
Are bolt-on or weld-on hinges better for a farm gate?
Bolt-on hinges suit wood, concrete or brick with no welding, as the Insaga L-shaped hinges show. Weld-on hinges suit steel gates and posts, as the Korhvante barrel hinges show. The Insaga strap hinges offer each mounting method.
Do gate hinges need lubrication?
The Insaga L-shaped hinges use sealed bearings that need no ongoing lubrication. The Korhvante barrel hinges have a grease zerk for lubrication after installation. The Insaga strap hinges use ball bearings for a smooth swing.
How many screws does a gate hinge need?
It depends on the hinge. The Insaga L-shaped hinges take 8 screws total, 4 per leaf. The CTrowelpro T hinges come with 36 screws of 20mm and 36 of 25mm in the box.
Can I use gate hinges on a shed door?
Yes. The CTrowelpro T hinges are listed for shed doors, barn doors and storage bins, and the Insaga strap hinges are listed for shed doors and garden gates.
More from the barn
See every goat fencing guide and all fencing and shelter guides.
More picks: best post hole diggers for rocky soil, best fence chargers for the money, best fence chargers for large pastures and best goat shelters.
