
On this page
Top picks at a glance
As an Amazon Associate I earn from qualifying purchases.
- 1
Insaga 6.7 Inch 1100LB 2 Pack9.7/10View on Amazon - 2
Weigreat 13 Inch 1000 Lbs 4 Pack9.6/10View on Amazon - 3
Ajingff 13 Inch 1000 Lbs 4 Pack9.6/10View on Amazon - 4
Insaga 4.9 Inch 600LB 4 Pack9.5/10View on Amazon
A goat leans on the gate while the latch holds, and the hinge takes the load with every swing. When a hinge sags, the gate drags, the latch misses, and the morning round takes longer. This guide covers gate hinge types for farm and livestock gates: plate hinges, bolt-on bearing hinges and long strap hinges, with each type matched to the gate it suits.
GoatGearLab earns a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. Affiliate disclosure.
| # | Product | GoatGear Score | Buy |
|---|---|---|---|
| 1 | Insaga 6.7 Inch 1100LB 2 Pack | 9.7/10 | Buy on Amazon |
| 2 | Weigreat 13 Inch 1000 Lbs 4 Pack | 9.6/10 | Buy on Amazon |
| 3 | Ajingff 13 Inch 1000 Lbs 4 Pack | 9.6/10 | Buy on Amazon |
| 4 | Insaga 4.9 Inch 600LB 4 Pack | 9.5/10 | Buy on Amazon |

Insaga 6.7 Inch 1100LB 2 Pack
A 6.7 inch bolt-on or weld-on hinge with sealed ball bearings, rated at 1100 lbs per pair, with locking screws and an anti-sag design.
Pros
- 1100 lbs per pair, the highest stated capacity in this guide
- Sealed ball bearings for smooth, quiet movement
- Locking screws and steel shims hold alignment in an anti-sag design
- Bolt-on or weld-on mounting with pre-lubricated bearings and oil-injection ports
Cons
- Hardware is not included for bolt-on mounting
- E-coating must be stripped before welding
- No warranty term is stated

Weigreat 13 Inch 1000 Lbs 4 Pack
A 13 inch bolt-on or weld-on strap hinge with sealed ball bearings, rated at 1000 lbs, with a 180 degree one-way opening.
Pros
- 1000 lbs load capacity with a 13 inch strap for stability
- Built-in sealed ball bearings for smooth, quiet operation
- Bolt-on or weld-on mounting with a full set of screws included
- Double-coated matte black finish described as rust-resistant
Cons
- Screws suit wood doors from 35mm to 60mm thick only
- Does not close automatically
- No warranty term is stated

Ajingff 13 Inch 1000 Lbs 4 Pack
A 13 inch bolt-on or weld-on strap hinge with dual ball bearings, rated at 1000 lbs per pair, in a 4 pack.
Pros
- 1000 lbs per pair with a 13 inch strap for stability
- Dual ball bearings for smooth, quiet operation
- Bolt-on or weld-on mounting with all accessories included
- Black powder-coated surface described as rust-resistant
Cons
- Screws suit doors from 35mm to 60mm thick only
- No warranty term is stated
- Stated specs match the Weigreat 13 inch hinge closely, including the same 8.35 pound item weight

Insaga 4.9 Inch 600LB 4 Pack
A 4.9 inch plate hinge in 6mm steel with an electroplated finish, rated at 600 lbs per pair, in a 4 pack.
Pros
- 6mm steel plates with an electroplated rust-resistant finish
- 600 lbs per pair suits lighter gates and shed doors
- 1/2 inch mounting holes suit wood screws or expansion bolts
- 4 pack covers more than one gate
Cons
- 600 lbs per pair is the lowest stated capacity in this guide
- No ball bearings are listed, only a 5/8 inch hinge pin
- No warranty term is stated
As an Amazon Associate I earn from qualifying purchases.
Gate hinge types: the short answer
Start with the gate, then pick the hinge. A light shed gate suits a small plate hinge; a heavy farm gate needs a longer hinge with bearings and higher stated load capacity. The Insaga 6.7 inch hinge lists 1100 lbs per pair with sealed ball bearings and locking screws, the highest load capacity here. The Weigreat and Ajingff 13 inch strap hinges each list 1000 lbs, and the Insaga 4.9 inch plate hinge lists 600 lbs per pair. Match the hinge to the gate, then check whether it bolts on, welds on, or both.
Gate hinge types compared
| Type | Example listing | Stated load capacity | Mounting | Amazon |
|---|---|---|---|---|
| Plate hinge | Insaga 4.9 inch 600LB 4 Pack | 600 lbs per pair | 1/2 inch mounting holes | |
| Bolt-on bearing hinge | Insaga 6.7 inch 1100LB 2 Pack | 1100 lbs per pair | Bolt-on or weld-on | |
| T strap hinge | Weigreat 13 inch 1000 Lbs 4 Pack | 1000 lbs | Bolt-on or weld-on | |
| T strap hinge | Ajingff 13 inch 1000 Lbs 4 Pack | 1000 lbs per pair | Bolt-on or weld-on |
Plate hinges
The Insaga 4.9 inch hinge is the small plate hinge here. It lists 6mm steel with an electroplated finish, a 5/8 inch hinge pin, 1/2 inch mounting holes and a 4 pack, with a load capacity of 600 lbs per pair. A plate hinge mounts flat on gate frame and post.
Bolt-on bearing hinges
The Insaga 6.7 inch hinge is the bolt-on bearing hinge here. It lists 6mm steel plates with sealed ball bearings, a load capacity of 1100 lbs per pair, steel shims and locking screws in an anti-sag design, and a low-profile face-mount shape. It gives 5.2 inch face-to-face hole spacing and 2.9 lbs per hinge.
Long strap hinges
The Weigreat and Ajingff hinges (on Amazon) are the long strap hinges here, both 13 inches long and T-shaped. Both list 1000 lbs load capacity and sealed or dual ball bearings, with bolt-on or weld-on mounting, a 180° one-way face-mount opening and a 90° side-mount opening. Both include screws for wood doors from 35mm to 60mm thick.
Reading load capacity against your gate
Load capacity is the first number to check. Listed capacities: Insaga 6.7 inch 1100 lbs per pair, Weigreat and Ajingff 1000 lbs, Insaga 4.9 inch 600 lbs per pair. Insaga and Ajingff state the figure per pair; Weigreat states 1000 lbs without saying per pair, so read the wording before comparing.
Mounting: bolt-on, weld-on or both
Mounting is how the hinge joins the gate and post. The Insaga 6.7 inch, Weigreat and Ajingff hinges offer bolt-on or weld-on mounting. The Insaga 6.7 inch hinge lists 0.5 inch pre-drilled bolt holes and says to strip the e-coating before welding; the Weigreat and Ajingff hinges include screws for wood doors from 35mm to 60mm thick. The Insaga 4.9 inch hinge lists 1/2 inch mounting holes, with wood screws for wood and expansion bolts for concrete.
The Weigreat and Ajingff hinges open 180° one way on a face mount and 90° on a side mount, so confirm opening direction before fitting. For the bolt-on against weld-on choice, see the weld-on vs bolt-on gate hinges guide.
Materials and finish
Material and finish set how a hinge holds up outdoors. The Insaga hinges list 6mm steel, the Weigreat and Ajingff hinges list thickened or solid carbon steel, and all four list a finish: electroplated on the Insaga 4.9 inch hinge, e-coating on the Insaga 6.7 inch hinge, matte black double-coated on the Weigreat hinge and black powder-coated on the Ajingff hinge. Each maker calls the finish rust resistant outdoors.
The picks: gate hinges for farm gates
With hinge type, load capacity and mounting settled, these hinges cover the plate, bearing and strap jobs in this guide.
Read the listing twice
Gate hinge listings contradict themselves, and the conflicting numbers are usually the ones needed to plan the install:
- Insaga 4.9 inch: the bullets state a thickness of 0.2 inch, or 6mm, while the spec table lists 0.04 inches.
- Insaga 6.7 inch: the bullets state 6.7 x 1.5 inches, while the spec table lists 6.7 x 3.0 inches.
- Weigreat 13 inch: the title states 13 inches, while the spec table lists 12.79 inches, and the title and bullets state 4 pieces, while the spec table lists NumberOfItems as 1.
- Ajingff 13 inch: the title states a 4 pack, while the spec table lists NumberOfItems as 1.
Trust the title and bullets over the spec table, and measure gate and post before ordering.
What this guide does not cover
This guide covers hinge hardware only, not latches, gate frames, posts or how to hang a gate.
FAQs from goat keepers
What type of gate hinge is best for a heavy farm gate?
A long hinge with bearings and a high stated load capacity: the Insaga 6.7 inch lists 1100 lbs per pair with sealed ball bearings; the Weigreat and Ajingff 13 inch strap hinges each list 1000 lbs with ball bearings.
How much weight can a gate hinge hold?
It depends on the listing: the hinges here list 600 lbs per pair, 1000 lbs and 1100 lbs per pair, so match capacity to the gate.
Should gate hinges be bolted or welded?
Either method works where the listing offers both: the Insaga 6.7 inch, Weigreat and Ajingff hinges list bolt-on or weld-on mounting, and the Insaga 6.7 inch listing says to strip the e-coating before welding.
Do gate hinges need ball bearings?
Bearings suit a gate that swings often: sealed ball bearings are listed on the Insaga 6.7 inch, Weigreat and Ajingff hinges; the Insaga 4.9 inch hinge lists a 5/8 inch pin instead.
What size gate hinge do I need?
Match length and stated load capacity to the gate: the hinges here run 4.9 inches to 13 inches long, with stated capacities from 600 lbs per pair to 1100 lbs per pair.
More from the barn
See every goat fencing guide and all fencing and shelter guides.
More picks: best gate hinges heavy duty, best steel gate hinges, weld-on vs bolt-on gate hinges and galvanized vs stainless gate hinges.
